Skip to main content

Make pytorch parameters contiguous to speed up training by 100x.

Project description

Contiguous Parameters for Pytorch

Accelerate training by storing parameters in one contiguous chunk of memory.

Speed up your optimizer with 3 lines of code!

This graphic shows a GPU step trace comparison with and without contiguous params for a Resnet50 on Cifar10, using Adam and gradient clipping. The upper trace is with the default optimizer, the trace below is with the parameter wrapper. Gradient norm + Adam

Step trace comparison for a Resnet50 on Cifar10, using SGD. Gradient norm + Adam

What's the difference to Apex?

Apex implements the full optimizer update in C++ and is limited to the supported optimizers. This wrapper allows to use any optimizer as long as it updates the parameters inplace.

How does it work?

Launching Cuda kernels comes with a small overhead, resulting in low GPU utilization when launching numerous fast-returning kernels. A typical example for this is the optimizer step. This package accelerates training by copying all parameters into one contiguous buffer, resetting the parameters to be views into the buffer, and applying optimizer updates on the contiguous representation. Depending on the model, the optimizer, the type of GPU used, etc, this can drastically reduce the time required for the optimizer's step function, resulting in speedups from anywhere between 7x to 100x.

For this to work, two requirements need to be fulfilled:

  1. The computation graph may only alter the parameters and gradients inplace and should not replace the parameter/gradient tensors with new ones. Make sure to call parameters.assert_buffer_is_valid() to detect any buffer invalidation.
  2. All operations executed on parameters.contiguous() must not rely on shape information or statistics of the parameter as these would be computed on the full buffer instead of each of the original parameters. For such operations, keep using parameters.original().

Disclaimer

This is still a rather new project and considered experimental. If you encounter a bug, please file an issue if there is no matching existing issue! Also, if you find this project helpful, consider leaving a star to keep me motivated or spread the word and help people to train their models faster :)

Install

pip install git+https://github.com/philjd/contiguous_pytorch_params.git

Example Usage

import torch
from torch import nn
from contiguous_params import ContiguousParams

data = torch.randn(5, 1, 8)
model = nn.Sequential(nn.Linear(8, 8), nn.Linear(8, 8))

# Create the contiguous parameters.
parameters = ContiguousParams(model.parameters())  # <--- (1) Wrap parameters.

# Use parameters.contiguous() instead of model.parameters() to initialize
# the optimizer. Note that the optimizer must update the parameters inplace.
optimizer = torch.optim.Adam(parameters.contiguous())    # <--- (2) Optimize view.

# Run the training loop as usual.
for x in data:
    loss = model(x).sum()
    loss.backward()
    # Gradient clipping also profits from contiguous memory.
    nn.utils.clip_grad_norm_(parameters.contiguous(), 0.1)
    optimizer.step()
    optimizer.zero_grad()
    # !!!!!!!
    # Always make sure to call buffer_is_valid() at least once, to detect
    # if operations invalidated the buffer by overwriting/copying parameters.
    # (Except when running in DDP mode, there the buffer check doesn't work.)
    # !!!!!!!
    parameters.assert_buffer_is_valid()  # <--- (3) Check that the optimizer only applies valid ops.

Debugging

Common Problems that might occur:

  • The loss is not going down. One reason for this could be that gradients are disconnected and don't use the contiguous grad buffer. This can happen when the optimizer with the contiguous params is created before moving the model to its device. A good check is to verify that the gradient_buffer tensor is non-zero.
  • A function updates a parameter with an operation that is not inplace (inplace ops have an underscore suffix). This can be catched with the ContiguousParams.assert_buffer_is_valid() function, so make sure to use it at least once per forward pass.
  • Operations try to change the parameter views inplace. This happens for example when nn.Module.zero_grad() is used instead of optimizer.zero_grad(). Either override your module's zero_grad function to link to the optmizer's zero_grad or manually zero_ the contiguous grad buffer.

Testing

pytest test.py

Benchmarking

Run python benchmark.py. This applies several updates with the original method as well as using contiguous parameters. You should see a speed up of ~100x. To take a look at the timeline, open chromium, navigate to chrome://tracing/, click load, and select the *timeline.json file.

Distributed Data Parallel Training

Training with DDP is also easy, we just need to make sure that the parameters for each replica are contiguous. To understand where we should insert the ContiguousParams into our nn.Module, let's first recap how DDP works:

  1. Create the reference model.
  2. Replicate the model onto the respective devices.
  3. Wrap as DDP module. This creates hooks between gradients, ensuring that they get synced across devices during backward. Note: DDP does not allow Parameters to change after this step.
  4. Initialize an optimizer for each device with the device's parameters. Each device calls optimizer.step for its own parameters but with the same gradients, due to syncing. This means we perform the same update on each device and end up with the same set of parameters, saving the round of syncing of parameters before the forward pass, which would be necessary if we would use only one device for computing step.

This means, the contiguous parameters need to be created after step 2 but before step 3. The easiest way to do this is to create your optimizer after moving the model to the desired device, otherwise you need to wrap the Module.cuda and Module.cpu functions and recreate the contiguous parameters there. Note: the buffer invalidation check currently doesn't work with DDP.

Contiguous params work with pytorch_lightning's DDP implementation for versions > 0.9 or on master after this commit.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

contiguous_params-1.0.0.tar.gz (5.7 kB view hashes)

Uploaded Source

Built Distribution

contiguous_params-1.0.0-py3-none-any.whl (5.7 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page