skip to navigation
skip to content

Not Logged In

Mopidy-Yamaha 0.1.2

Mopidy extension for controlling volume on Yamaha receivers

Latest PyPI version Number of PyPI downloads Travis CI build status Test coverage

Mopidy extension for controlling volume on external Yamaha network connected receivers. Developed and tested with a Yamaha RX-V673.

Installation

Install by running:

sudo pip install Mopidy-Yamaha

Configuration

The Mopidy-Yamaha extension is enabled by default. To disable it, add the following to mopidy.conf:

[yamaha]
enabled = false

The Yamaha receiver must be connected to the local network and the receiver ip must be specified in the configuration.

To use the Yamaha receiver to control volume, set the audio/mixer config value in mopidy.conf to yamahamixer. You probably also needs to add some properties to the audio/mixer config value.

Supported properties includes:

  • host: The ip or hostname to the receiver.
  • source: The source that should be selected on the amplifier, like HDMI1, AV_1, AUDIO_1, etc. Leave unset if you don't want the mixer to change it for you.

Configuration examples:

# Minimum configuration, if the amplifier is available at IP 192.168.1.15
[audio]
mixer = yamahamixer host=192.168.1.15

# Full configuration
[audio]
mixer = yamahamixer host=192.168.1.15 source=HDMI2

Changelog

v0.1.2 (2014-02-14)

  • Update changelog

v0.1.1 (2014-02-14)

  • Minor doc changes
  • Add talker test for mute on/off

v0.1 (2014-02-13)

  • Initial release
 
File Type Py Version Uploaded on Size
Mopidy-Yamaha-0.1.2.tar.gz (md5) Source 2014-02-14 10KB
  • Downloads (All Versions):
  • 7 downloads in the last day
  • 58 downloads in the last week
  • 342 downloads in the last month