skip to navigation
skip to content

PyBarobo 0.1.12

Native Python Barobo robotics control library

Package Documentation

Latest Version: 0.1.18

The Barobo Python Module

This python module can be used to control Barobo robots. The easiest way to use
this package is in conjunction with BaroboLink. After connecting to the robots
you want to control in BaroboLink, the following python program will move
joints 1 and 3 on the first connected Linkbot in BaroboLink::

from barobo import Linkbot
linkbot = Linkbot()
linkbot.moveTo(180, 0, -180)

You may also use this package to control Linkbots without BaroboLink. In that
case, a typical control program will look something like this::
from barobo import Linkbot, Dongle

dongle = Dongle()
dongle.connectDongleTTY('COM3') # where 'COM3' is the com port the Linkbot is
# connected on. In Windows, the COM port of the
# Linkbot can be identified by inspecting the
# Device Manager. On a Mac, the com port will
# appear in the "/dev/" directory, usually as
# something like "/dev/cu.usbmodem1d11". In
# Linux, it should be something like
# "/dev/ttyACM0".
linkbot = dongle.getLinkbot() # or linkbot = dongle.getLinkbot('2B2C') where '2B2C'
# should be replaced with the serial ID of your
# Linkbot. Note that the serial ID used here can
# be that of a nearby Linkbot that you wish to
# connect to wirelessly. If no serial ID is
# provided, the new linkbot will refer to the
# Linkbot currently connected via USB.
linkbot.moveTo(180, 0, -180)
File Type Py Version Uploaded on Size
PyBarobo-0.1.12.linux-x86_64.tar.gz (md5)
built for Linux-3.8.0-35-generic-x86_64-with-glibc2.7
"dumb" binary any 2014-04-24 124KB
PyBarobo-0.1.12.tar.gz (md5) Source 2014-04-24 27KB
PyBarobo-0.1.12.win32.exe (md5) MS Windows installer any 2014-04-24 228KB
  • Downloads (All Versions):
  • 130 downloads in the last day
  • 705 downloads in the last week
  • 3812 downloads in the last month