Skip to main content

A version of the Reversi board game intended for casual play.

Project description

An implementation of the popular Reversi board game, for use by one or two players. Some simple AI is included to provide a computer opponent, and if you are feeling lazy you can watch while two AI opponents slug it out.

Installation

For Version 1.2, supported platforms are Linux and now Windows (tested on Win7), although in theory this game should play equally well on Mac. I would like to hear from anyone who can help with porting (I don’t have a Mac, or a Mac OS to hand).

System Requirements:

  • Python 3

  • Numpy for Python 3

Installation (Linux):

  1. Ensure all dependencies are installed. In particular, make sure you have a version of python >= 3.2, with the numpy package installed.

  2. Unzip the tar.gz somewhere.

  3. In a console window navigate to the Reversi-1.2 directory and run the following command as root (on Ubuntu/Debian use sudo):

    [sudo] python3 setup.py install

  4. On Ubuntu a desktop launcher is installed, which you should be able to find in the Dash and drag to the launcher bar. The default assumes you are using python 3.2. If this is not the case you will need to manually tweak the path references in the .desktop file.

Installation (Windows):

  1. Ensure all dependencies are installed. In particular, make sure you have a version of python >= 3.2, and numpy. The easiest way to do this on Windows is to install WinPython for your system, because (in addition to numpy) loads of commonly-used packages are bundled with python ready to use.

  2. Extract the tar.gz somewhere (7-Zip should work).

  3. Navigate into the dist directory and extract the Reversi-1.2.zip file.

  4. In a console window navigate to the Reversi-1.2 directory and run the following command:

    [path_to_python\\]python setup.py install

  5. A .bat launch script is installed in the public desktop. This should work on both XP and Win 7/8 systems, but the path references may need to be edited for your flavour of python installation. The default assumes WinPython 3.3.2.3 for amd64 (see note above).

Controls

The controls for the game are minimal, and hopefully self-explanatory, but here is a list:

Preparation Controls:

Language:

A selection box appears to enable the player to choose their preferred language.

If no language is selected the game will default to English.

Your name:

You can type anything you like here, it just helps to distinguish the players.

Mode:

Four modes are supported:

  1. Normal (human versus computer opponent).

  1. Person versus Person, in ‘hot-seat’ mode.

  1. Computer versus computer, what I like to call TV mode.

  1. Benchmarking mode, all graphics turned off. In this mode additional information is requested for the number of games to play.

The default mode is ‘Normal’.

Token:

The game asks the first player to choose a token, Black or White. Click your choice or type ‘b’ or ‘w’, depending on UI (see below).

Game Play Controls:

Who starts is chosen at random.

Choose Tile:

Depending on UI this is achieved by either clicking on the appropriate tile, or typing in the tile coordinates as a space-separated pair of numbers, e.g., 5 6

Hints:

A hint mode is provided for each (human) player that can be toggled by either typing ‘h’ or clicking the appropriate button, depending on the UI you are using.

Quit:

Typing ‘q’, hitting ‘Esc’ and/or clicking the ‘Close Window’ icon (the details depend on the UI) causes the current game to be aborted.

Play Again:

You can elect to play again as many times as you want. The more games you play, your game statistics will be accumulated and displayed on the scoreboard.

At the time of writing, there is no mechanism for storing game statistics between sessions, so if you want to save your high-scores you will have to resort to a screen-shot!

Choice of UI: Console vs. Tkinter/ttk

The game has been shipped ‘hard-wired’ for the tkinter/ttk interface. For most purposes this is (I believe) a nice and easy interface to use. However, particularly if you want to do a lot of bench-testing of different AI, you may wish to use the console interface instead. This is very easy do in the source code, just un-comment the console interface and comment the tkinter interface in the heading of the ui module.

An older version of the game also had a pygame interface, but this has been removed in the shipped version. There are several reasons for this:

  • At the time of writing, installing pygame for Python 3 is still something of a black art. It was felt that the difficulty of installing pygame outweighs any advantages of using it for a simple board game for end users.

  • Removing the pygame interface makes the packaging simpler (OK, so I’m lazy).

  • For a board game, the sophisticated handling of sprites (pygame’s great strength) is not required. Tkinter/ttk offers instead a very good set of themed widgets with excellent hooks for callouts, making the ui very easy to write, and much nicer to use, than is possible with the graphics of pygame.

  • At the time of writing, pygame does not support unicode. This means that i18n with languages like, for example, Chinese, is not possible in a pygame interface using the Python i18n package. You just end up with a load of rectangular boxes on the screen. i18n with pygame is still possible, but it would require a lot of code, and the use of a lot of graphic images instead of text. As noted above, I am lazy.

    sigh Why, in this day and age, is software being written that does not support unicode (expecially when that is one of the strengths of the language it is written in)?

Some history:

This implementation of Reversi is very loosely based on the Reversi game described in the book Invent Your Own Computer Games With Python by ‘Al Sweigart <http://inventwithpython.com/>’_. While some of the algorithms may still be recognisable, this code has been designed from scratch from an object model rather than using the functional programming flow diagram approach.

Originally implemented with a console UI, the code was adapted to work with both pygame and tkinter/ttk graphics. However, due to lack of support in pygame for unicode, the pygame interface was dropped to enable i18n (see above for the polemic).

I have had a lot of fun designing some more intelligent AI for the more demanding player, although I expect this still falls well below tournament standard. Nevertheless, the result is more pleasing to my eye, and hopefully more bug-free and maintainable. The AI is designed to be pluggable, so it should be relatively easy to create new algorithms and implement them in future versions.

As you might have guessed from the citation above, my original motive for writing this was to learn Python. However, as I went along the project became a vehicle for learning a lot of other associated Pythonic stuff.

This little game introduced me to Pygame and NumPy, and then tkinter/ttk. In the later stages I found out how to use the i18n module for internationalization.

This project has been an opportunity for me to (re-)learn Eclipse, and an introduction to NetBeans. I have also looked at some other IDEs aimed specifically at Python, but I have not (yet) found one that will stay alive long enough to type ‘Hello World!’.

I have also found out a lot I never wanted to know about CVS, and a lot I am very grateful to have discovered about Mercurial.

I have used this little piece of code to find out more about distributing Python software. If you are reading this, you will know I have succeeded :).

Finally, because I don’t allow Windows computers in the house, I have learned one heck of a lot about using VirtualBox while I was testing/debugging the Windows installation. I also re-discovered why I hate Windows…

Languages

At time of writing the only options supported are English, French and Chinese, but if there is someone ‘out there’ interested in helping with other translations I will be happy to hear from them.

I would also be grateful for any help with my rusty French and ‘Google Translate’ Chinese :).

Author:

Bob Bowles <bobjohnbowles@gmail.com>

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

Reversi-1.2.1.tar.gz (49.7 kB view hashes)

Uploaded Source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page