astro_reduce: A simple CCD-image reducer for the Observatoire de Paris-Meudon, applied to OHP T120 telescope.

What does astro_reduce do?

astro_reduce carries out the cosmetic and astrometric reduction of astronomical CCD images read in FITS format. The cosmetic reduction is done in a standard fashion with dark and flat field images. The astrometric reduction is done via calling either the Astromatic Software Suite or the astrometry.net on the images obtained from the cosmetic reduction.

Optionally, it can interpolate dark fields for exposure times missing in the available data and can also convert the intermediate and reduced images to PNG format for easy inspection. The astrometric reduction can be carried out anywhere from simply extracting sources to catalogs up to updating the image headers with astrometric output such as the linear projection matrix coefficients. For this, the relevant programs--either sex, psfex or scamp accordingly with the specified options--must be installed on your system. The configuration files for these commands are handled internally by astro_reduce, you do not need to provide them.

To operate, astro_reduce is to be launched from a directory containing three folders:

• A DARK folder, containing all the dark field images,
• A FLAT folder, containing all flat field images,
• A ORIGINAL folder, containing all the images of objects.

All files must be in FITS format, with correct filter, exposure time and object header keywords wherever relevant.

The flowchart below illustrates how astro_reduce runs. The boxes describe the content of folders found after the run, with directory names and name formats for files therein. The lines describe the flow of data during the run: solid lines indicate the standard run of the program, while dashed lines can be realized optionally.

When launched for the first time in a directory, use the --setup option. This will copy all data files to working folders (thereby backing up the original data). Then, run astro_reduce again with relevant options to run the cosmetic and astrometric reductions; see details below on usage.

During cosmetic reduction, intermediate images such as master dark fields or non-stacked object images are safe-kept in the ar_masters/ and ar_tmp/ folders. The final stacked images can be found in the stacked/ folder. The cosmetic reduction process and the nomenclature for the naming of the files in the ar_masters/, ar_tmp/ and stacked/ folders are given in the Cosmetic reduction method paragraph below. If options to perform the astrometric reduction were used, the results (such as source catalogs) can be found after running in the SEXRES, PSFRES and SCAMPRES folders. The images with updated astrometric header data can be found in the reduced/ folder, see Astrometric reduction method below.

Note: It is highly recommended to inspect the intermediate images produced by astro_reduce before considering the final reduced images. Also, we highly recommend you inspect your raw images and eliminate any bad ones before launching the software.

Installing

The astro_reduce program can be installed from the PyPI under the name astro-reduce. This package provides the command with all options.

Alternatively, use the setup.py file in the project directory with python3 setup.py install --user to install the program locally. You should then include ~/.local/bin (or ~/Library/Python/3.x/bin for Mac users) to your path in order to invoke astro_reduce from the console.

Dependencies

astro_reduce is written in Python 3.

astro_reduce depends on the click, astropy, astroquery, numpy, scipy and matplotlib Python packages, which are all available through the PyPI.

Usage

When used for the first time in a directory, or when the data has been modified since the last use of astro_reduce, the program should be invoked with the --setup option:

astro_reduce --setup [--verbose]

This will setup the reduction by copying all the raw data to astro_reduce's working folders whilst changing the file names to standardized formats, as seen in the flowchart. Also, during this phase, a configuration file in the JSON format will be written. It summarizes the objects, filters and exposures times present in the original data and is used by astro_reduce in the reduction process. This file should be left in the directory for further reference or for later rerunning of the program.

Note: This first setup step is effectively a back-up of your data, as the data left in the DARK, FLAT and ORIGINAL folders are no longer touched during the subsequent reduction process.

If the original data has changed or your are not sure when the --setup option was used last, you can remove all astro_reduce working data with the --clear option.

If the setup has already been done in the directory by prior use of the --setup option, astro_reduce should be used without this option:

astro_reduce [OPTIONS]

astro_reduce has been tested on Linux and Mac platforms, and has yet to be tested on Windows.

Options

• --version Show the version and exit.
• -s, --setup Set up the directory for reduction. Use this option the first time astro_reduce is run in the directory or after the '--clear' option was used.
• -c, --clear Remove all astro_reduce-related files and folders in current directory and exit.
• -i, --interpolate Interpolate existing dark fields if some are missing.
• -v, --verbose Enables verbose mode (recommended).
• -t, --tmppng Write PNG format of auxiliary and master images after cosmetic reduction.
• -r, --stkpng Write PNG format of stacked images after cosmetic reduction.
• -m, --astromatic Performs all the astromatic suite commands (sextractor, psfex and scamp) for astrometry reduction purpose. This is equivalent to setting all the --sex --psfex --sexagain --scamp options.
• -n, --astrometrynet Performs the astrometry reduction with the astrometry.net tool. Note that by default the astromatic sextractor software is run and only the sources are sent to the astrometry.net server. If this operation fails, the whole image is sent, which increases the user exectution time but also increases the chances of convergence success. Setting -n erases the -m option.
• --sex Run the 'sex' Astromatic command on all auxiliary images after the cosmetic reduction.
• --psfex Run the 'psfex' Astromatic command with the 'sex'-determined sources in all auxiliary images.
• --sexagain Run the 'sex' Astromatic command a second time, using the 'psfex'-determined PSF data.
• --scamp Run the 'scamp' Astromatic command on all auxiliary images after cosmetic reduction.
• --nomaster If set, do not calculate the master darks and flats (and assume they are already there!).
• --nostack If set, skip the stacking process.
• --help Show this message and exit.

Cosmetic reduction method

Master dark images

For a given exposure time, the master dark is calculated as the pixel-wise median of all the dark fields of that exposure. This allows to eliminate cosmic ray traces.

Dark field interpolation

In the case where dark fields for some exposure times are missing, astro_reduce can interpolate from the available master darks to obtain master darks for all the exposures necessary to reduce the object or flat images. This is done by specifying the --interpolate option.

The interpolation is least-square linear, i.e., two images A and B are determined from the available master dark images such as to minimize the square error on the linear interpolation (master dark) = (exposure time) x A + B.

Using these A and B, the missing master darks are calculated according to this equation.

The FITS files for all the master dark images (deduced from dark fields or interpolated) can be found after run in the ar_masters/ directory under the names mdark_[exposure].fits.

Master transmission (flat) images

The master transmission image for a given filter is an image which encompasses the relative transmission of each pixel in the optical setup (telescope optics through filters to CCD matrix). It is calculated for every filter as the median over all flat field images, after subtraction of corresponding master dark images and normalization.

The FITS files for all the master transmission images can be found after reduction in the ar_masters/ directory under the names mtrans_[filter].fits.

If you have already run astro_reduce or have your own master dark and flat images, you can skip these two last steps with the --nomaster option. Beware that, in this case, you must place your custom master files in the ar_masters/ folder before running.

Individual image reduction

An object image of given exposure and filter is cosmetically reduced by subtracting the corresponding exposure master dark image, and dividing by the corresponding filter master transmission image. We refer to these images as the auxiliary images, as in the flowchart.

The FITS files for object obj, with filter filt and exposure time exp are found in the ar_tmp/ folder after reduction, under the name [obj]_[filt]_[exp]_*_aux.fits (for auxiliary), which contains an astro_reduce-internal reference number.

Realignment and stacking

Finally, for each series of same exposure and filter for each object, the auxiliary images stacked: they are realigned through optimization of their mutual cross-correlations, and then their pixel-wise median image is calculated. Using the median rather than the mean allows to efficiently remove hot pixels. This will be all the more effective as dithering has been used in acquiring the images of a series.

During the realignment, images are rolled to superimpose themselves. Therefore, if the images were too misaligned to begin with, objects that roll beyond the edge can end up in odd places, potentially producing ghost images of objects. During astro_reduce's run, a warning is issued to the user if any image is rolled by more than 15% of the field size during the realignment. In this case, it may be useful to remove the offending image from the dataset. If there are many such images and they are aligned amongst themselves, it is advised to change their header OBJECTs in order to process them together as a separate batch.

These stacked images are the final cosmetically reduced images and can be found in the stacked/ folder after reduction, with the same names as in the preceding step, save the _aux suffix and the internal image reference number.

This stacking step can be altogether skipped using the --nostack, as appropriate for, e.g., fast moving objects.

Some things to know

• As mentioned earlier, the original files in the DARK, FLAT and ORIGINAL folders are not used during the reduction process. Only their copies in the ar_* working folders are used.
• In copying the original files during the setup process, astro_reduce in effect backs up your data.
• astro_reduce will deduce the object captured in a given field from the OBJECT keyword entry in the file's header. In the reduction, all files of a same object, filter and exposure time are cosmetically reduced and stacked together. Therefore, in order to keep different series of images of a same object separate, it is recommended to append a tag to the object name in acquiring the images of the series. For example NGC4993-1, NGC4993-2, etc.
• During the cosmetic reduction, the headers of synthetic images are filled in with the correct OBJECT, FILTER, EXPOSURE, EXPTIME and IMAGETYP keyword values. The other keyword values (such as the time of acquisition) are inherited from the parent images (raw darks and flats for master dark and master transmission images; raw object images for final reduced object fields).
• The cosmetically reduced images found in ar_cosmetic/ and then stacked/ are more voluminous (typically 4 times) than the original images, because they are encoded as floats following the dark-flat manipulations.
• fit and other derivatives can be used as extensions for the FITS files.
• Remaining hot pixels in the reduced images can be the result of insufficient dithering.

Astrometric reduction method

The astrometric reduction is launched either with the -m (or --astromatic), -n (or --astrometrynet), or --sex, --psfex, --sexagainand--scamp`) options, depending on how far you would like to take the reduction:

• Using -m (or --astromatic) is equivalent to setting all options --sex, --psfex, --sexagain and --scamp
• Using --sex runs the SExtractor program on all auxiliary files and places the results (source catalogs, etc.) in the SEXRES/ folder, as in the flowchart.
• Using --psfex (which implies --sex) runs the PSFEx program on the auxiliary images with SExtractor's results to produce PSF-related data in the PSFRES/ folder.
• Using --sexagain (which implies --psfex) runs SExtractor a second time on the auxiliary images, but using the PSF data from the PSFEx run. This updates the results in SEXRES/.
• Finally, using --scamp (which implies --sex) runs SCAMP to perform the astrometric reduction on the auxiliary images, using the source catalogs from SEXRES/ and data on remote servers.
• Alternatively to the Astromatic suite, you may use the astrometry.net capabilities by using the -n (or `--astrometrynet) option. This will run first the SExtractor software and send the sources found to the astrometry.net server for astrometric reduction. The resulting header is put into the output images.

If the --scamp option was used, the final astrometrically reduced files with updated headers can be found in reduced/ after run.

• Alternatively to the Astromatic suite, you may use the astrometry.net capabilities by using the -n (or --astrometrynet) option. This will run first the SExtractor software and send the sources found to the astrometry.net server for astrometric reduction. The resulting header is put into the output images, found in the reduced/ directory.

Note: astro_reduce ships with all configuration files for the astrometric reduction of the OHP T120 telescope camera, you need not provide them. Astrometry is also performed on the stacked images.

Enhancing astro_reduce

How can I add an option to astro_reduce?

The project uses the Click Python package to handle the CLI options. To add an option, follow these steps:

1. Add a @click.option decorator to the cli function defined in astro_reduce.py. This allows to define the option's command-line flag, its short version and its help sentence. You can take inspiration from the existing options;
2. The previous step will define a argument to the cli function, with exactly the spelling of the CLI's flag; You must add this argument to the signature of the cli function;
3. So that the listing of current options in the welcome message continues to work properly, you must add the option to the OPT_LIST in helpers.py;
4. If the option extends the astrometric reduction capabilities of astro_reduce, please also add the option to the ASTROMATIC_LIST in helpers.py.

For more information on defining options, see the Click documentation.

Making releases to the PyPi

We use the PyPi to distribute astro_reduce. To make a release, follow these steps:

1. Define the version number of your release in the x.y.z form in setup.py. This version must not already exist in the PyPi, or else you will run into trouble down the line. We use semantic versioning:

• Change x when you make backwards-incompatible changes, such as changing an existing option or the output format;
• Change y when you make backwards-compatible changes, such as introducing new functionality through a new option or new documentation;
• Change z when you fix minor bugs without noteworthy functionality improvement.

2. Make sure you have updated the documentation (i.e., this README) such that it fits the new version;
3. Make a commit to the git repository where you indicate the number of the new version;
4. Run python3 setup.py bdist_wheel and then twine upload dist/*.

This last step will prompt you for your PyPi credentials. Naturally, it will only work if you have maintainer or owner status on the project's PyPi repository.

Adding or changing a data file

We also use the PyPi to distribute data files for astro_reduce. To include a new file to the distribution, do the following:

1. Add the file to the data/ folder in the project repository;
2. To make sure it is distributed with the rest of the project, list it in the data_files option in setup.py;
3. To retrieve the path to the file in the astro_reduce.py script in order to use the file, we use the resource_filename function of the pkg_resources package: If you added my_new_file.txt to data/ in the repo, the path to file my_new_file.txt in the user's system will be the result of the call to pkg_resources.resource_filename with arguments astro_reduce and data/my_new_file.txt. For example, see how we retrieve the paths to the Astromatic configuration files around line 570 in astro_reduce.py.

Potential improvements

• Allow the user to specify their own configuration file for the Astromatic programs (thus overriding the ones distributed through pip).
• Allow the user to run the Astromatic suite on the stacked images as well, not only on the auxiliary images.