Skip to main content

conda environment creation and update from meta.yaml

Project description

coverage PyPI version fury.io PyPI pyversions MIT license Documentation Status Powered by DepHell logo

Due to the redundant dependency information inside the meta.yaml (required to create the conda-package) and the environment.yml (as definition file for the conda-environment during development and for production), cenv (short form for conda-env-manager) was created to make the meta.yaml the only relevant file and to create and update conda-environment from the definition inside this meta.yaml. The name of the conda-environment to create / update is defined in the section extra:cenv and the variable env_name inside the meta.yaml. The python version must be defined in extra:cenv inside the key python.

The steps run by cenv:

  • creation of a backup if the environment already exists followed by the removal of the previous environment.

  • creation of the environment as defined in the meta.yaml. If any failures occurred during creation and the backup was created, the command to reset the backup-version can be used.

  • if enabled in the config file the environment.yml is exported after creation / update of the environment.

The usage of cenv reduces the conda commands to use to the following:

  • conda activate ... to activate the environment

  • conda deactivate to deactivate an environment

  • conda info to show information about the currently activated environment

  • conda search ... to search for availability of a package in the conda channels.

  • conda remove -n ... --all to remove an environment

  • cenv to create / update an environment

Documentation

For complete documentation see readthedocs.

Installation

Install cenv using pip:

pip install cenv_tool

Now run init_cenv to create the relevant config-files and add the autoactivate- and autoupdate-shell-function to your .bashrc / .zshrc.

autoactivate and autoupdate

Per default these features are deactivated, even if added to your shell by running init_cenv.

autoactivate-feature

The autoactivate-feature activates the conda-environment as named extra-section in the meta.yaml located at conda-build/meta.yaml, if the environment exists. To activate the autoactivate-features run:

autoactivate_toggle

autoupdate-feature

The autoupdate checks if the content of the meta.yaml changed. The current state is stored as a md5sum in conda-build/meta.md5. If it changed the cenv-process is called.

For the autoupdate-feature run:

autoupdate_toggle

Usage

All steps required to create or update the projects conda environment are run automatically running:

cenv

ATTENTION:

If you use cenv, each environment should only be created, updated and modified using cenv! This means the commands conda install, conda remove are not used anymore. Changes of the dependencies of the environment are defined inside the meta.yaml and are applied by using cenv.

This means:

  • new dependency required => add it in meta.yaml and run cenv.

  • dependency not needed anymore => remove it from meta.yaml and run cenv.

  • need of another version of dependency => change the version of dependency in meta.yaml and run cenv.

The required information about the projects conda environment are extracted from the meta.yaml. This meta.yaml should be located inside the project folder at ./conda-build/meta.yaml. The project-configuration is defined in the extra:cenv section of the meta.yaml. There you can define the name of the projects conda-environment at env_name. The python version has to be defined here at python, too. Also you can define requirements only needed during development but not to be included into the resulting conda package. These requirements have to be defined in the dev_requirements -section.

All other parts of the meta.yaml have to be defined as default.

A meta.yaml valid for cenv should look like the following:

{% set data = load_setup_py_data() %}

package:
    name: "example_package"
    version: {{ data.get("version") }}

source:
    path: ..

build:
    build: {{ environ.get('GIT_DESCRIBE_NUMBER', 0) }}
    preserve_egg_dir: True
    script: python -m pip install --no-deps --ignore-installed .

requirements:
    build:
      - python 3.6.8
      - pip
      - setuptools
    run:
      - python 3.6.8
      - attrs >=18.2
      - jinja2 >=2.10
      - ruamel.yaml >=0.15.23
      - six >=1.12.0
      - yaml >=0.1.7
      - marshmallow >=3.0.0rc1*

test:
    imports:
        - example_package

extra:
    cenv:
        env_name: example
        python: 3.6
        dev_requirements:
            - ipython >=7.2.0

ATTENTION:

In the requirements-run-section the minimal version of each package has to be defined! The same is required for the dev_requirements-section. Not defining a version will not create or update a conda-environment, because this is not the purpose of the conda-usage. The validity of the meta.yaml is checked in cenv using the marshmallow package. You can additionally add upper limits for the version like the following: - package >=0.1,<0.3

If cenv is run the environment is created / updated from the definition inside this meta.yaml. The creation of the backup of the previous environment ensures to undo changes if any error occurs during recreation of the environment.

ATTENTION:

cenv can only update the environment if it is not activated. So ensure the environment to be deactivated before running cenv.

Per default exporting the conda environment definition into an environment.yml is turned off. If you want to turn this functionality on you need to modify your ~/.config/cenv.yml as described in the configuration-part.

Example for the output of the cenv command:

On create:

Creating cenv_dev
   ├── Create environment
      └── Created
   ├── write md5sum of meta.yaml
      └── updated
   └── Done

On update:

Updating cenv_dev
   ├── Create backup
      └── Created
   ├── Remove existing env
      └── Removed
   ├── Create environment
      ├── Clear backup
         └── Cleared
      └── Created
   ├── write md5sum of meta.yaml
      └── updated
   └── Done

Development of cenv

Develop cenv

To create / update the dev environment to develop cenv run the pre-commit hooks manually:

pyenv local 3.7.3
dephell venv shell --env=dev
dephell deps install
pre-commit run --all-files

Running tests

To create / update the test environment run:

dephell venv shell --env=pytest
dephell deps install

To run all tests run the following command:

dephell project test --env=pytest

Updating the docs

To create / update the docs environment run:

dephell venv shell --env=docs
dephell deps install --env=docs

To create / update the docs first run the tests as described above. Then run:

dephell venv shell --env=docs
sphinx-apidoc -f -o docs cenv_tool && sphinx-build -W docs docs/build

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

cenv_tool-3.0.1.tar.gz (18.7 kB view hashes)

Uploaded Source

Built Distribution

cenv_tool-3.0.1-py3-none-any.whl (16.3 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page