skip to navigation
skip to content

fifostr 1.1.9

fifostr - A FIFO (first in first out) buffer for strings derived from deque with pattern match callbacks

A small python lib for treating strings as fifos with callback-based pattern matching

  1. 2011 manu chatterjee deftio (at)

fifostr (First In First Out String) is a small python library originally used for combining deque with pattern-trigger operations for an embedded terminal program. It allows pieces of a string to be treated in a mutable way with operations that you would expect from a bi-directional list such as insertion at either end and adding/removing N chars from either end.

fifostr has built-in pattern matching and triggering. Simply add / remove patterns which can call a user supplied function (E.g. if the pattern is “seen” then trigger the function). Patterns can be strings, regexes or user-supplied-functions. A pattern consists of:

  • pattern: string or compiled regex or user-supplied-parser-function
  • label: user supplied ‘name’ for this pattern
  • start index : position in fifostr to begin pattern match. default is 0 (also accepts the character ‘^’ as start anchor for those familiar with regexes)
  • stop index : position in fifostr to end pattern match. default is end of fifostr. the letter ‘$’ has special meaning as end of string no matter the length (again regex)
  • callback_fn : called if pattern is found, fifostr(start:end) and the label are passed to the callback function (callback(‘thematchingstring’,’label’))
  • active : default is True, sets whether this pattern should be actively looked for

Originally a lighter version of this was used in a python serial terminal program dioterm (which allowed the serial terminal to parse commands sent/received by both sides).

And finally .. I just wanted to get some practice on python module packaging …

cheers- mc


pip install fifostr # or just pull from the source repository and put in your source path

Original Usage

Originally part of a terminal program called ‘dioterm’ (albeit in much more compact form), this library was used used to ‘listen’ to traffic in either direction on a serial port. When certain patterns were found such as a command sent from the host or a special piece of data from the embedded microntroller client, fifostr would trigger a callback to do something. This was very useful when sequences of commands had to be set up between the host and client. Many of these sequences where conditional based on what either the host or client sent resulting in many variations of sequence-test cases, especially if this results in the host then having to make some other call to an unrelated process or hardware to reply correctly.


FIFOStr is a string which is (derived from deque) with these properties:

  • add/remove chars or strings at either end

  • mutable (can set a char to any value like an array with [])

  • use slices, lists, or tuples to retrieve members (just like a real str object)

  • get head/tail (returns as a str)

  • match head/tail –> match a supplied string to either the head or tail

  • use patterns to trigger callbacks –> pattern can be string | regex | usersuppliedparser any of which triggers user supplied callback_fn

    • all patterns can look at either the whole fifostr or any subset e.g. addPattern(“foo”,myCallback,2,5,”bar”)

      --> only looks for "foo" between positions 2 and 5 in the fifostr and will call myCallback with ("foo","bar")  if found
    • all patterns have optional label which can be used for logging purposes (eg. when pattern found, in addition to callback, emit label)

    • user supplied callback_fn is called with both the string-match section and the label

    • patterns can be added/deleted from the list of patterns “watching” the fifostr content

    • all (active) patterns are always matched. fifostr matches multiple different patterns over the same string.

  • clear all patterns –> removes patterns from processing

  • get/setPattern Active/Inactive –> allows a stored pattern to set on or off

  • Python 2.7+, Python 3+ support with no mods

Usage example

See to run in tests dir – same examples as here but more comments, more use cases

“` from fifostr import FIFOStr def main():

myFifoStr=FIFOStr(5) #make a fifostr of length 5 (for unlimited length omit number)
myFifoStr+='1234567' #adds 1234567 to fifostr ... but len of fifostr is 5
                     # so only 34567 is retained

print "myFifoStr.head(3)= ",myFifoStr.head(3) #shows 345
print "myFifoStr.tail(4)= ",myFifoStr.tail(4) #shows 4567

# the eqhead and eqtail functions allow string compares against
# the head or the tail

myFifoStr.eqhead("3456")    #True
myFifoStr.eqhead("567")     #False
myFifoStr.eqtail("4567")    #True
myFifoStr.eqtail("abc")     #False

#fifostr.testPattern() allows you to test if the pattern is present in the fifostr object
#test a  string pattern directly
myFifoStr.testPattern('67890') #False

#test a regex pattern directly.  to do this pass any valid regex in compiled form
myFifoStr.testPattern(r1)   #True

myFifoStr.testPattern(r2)   #False

#more generally we can add (and remove) patterns which will scan and trigger a call back everytime the fifostr
#internal content changes (whether adding or deleting chars from either end or even rotating/reversing the fifstr object)

#adding patterns
p1 = myFifoStr.addPattern("234",logf,label="234 was here") #integer index returned managing pattern
p2 = myFifoStr.addPattern("67890",logf,label="67890 detected")
p3 = myFifoStr.addPattern(r1,logf,label="r1 detected")
myFifoStr.addPattern(r2,logf,label="r2 hit")
myFifoStr.addPattern(f1,logf,label="f1 hit")
myFifoStr.addPattern(f2,logf,label="f2 hit")

#patterns can be set active/inactive via pattern management fns
myFifoStr.setPatternActiveState(p1,False) #based on index returned from addPattern

#now show searching for stored pattern matchers in the pattern dict
#this is not searching the fifo-string itself, just the stored patterns that we have entered
print("find pattern by label 'foo':",myFifoStr.findPatternByLabel("foo")) #no matches returns empty list
print("find pattern by label '234 hit':",myFifoStr.findPatternByLabel("234 hit")) #shows match
print("find pattern by label using regex '[rf][0-9]':")

#and finally demonstrate that patterns auto-trigger when items inserted in fifostr .. which afterall
#is the point of the whole thing.. ;)
print("\n fifo operations ============")
for c in '01234567890abcdefghijklmnop':  #show using inc which accomplishes same thing
    myFifoStr += c

myFifoStr+= 'abcdefghi'
print (myFifoStr.all())



Absolutley no warranties on performance. This is not replacement for a compiler/parser front end! It just iterates over stored patterns every time something is added to the fifostr object. If you do have a parser you wish to be called then just add it as a function so that every time the fifostr is updated with a char it will call your parser to do the work. Your parser must return a boolean result if you wish to use the callback based triggering.


let your own parser do the work

myFifo = fifostr(20)  # make a 20 char fifostr
myFifo.addPattern(myParser,myCallbk) #myParser passed entire fifostr (as str) when char(s) added
myFifo.addPattern(myParser,myCallbk2,3,5) #myParser passed fifostr btw (3,5).  My Parser must return True if match found for callback to be invoked


Source code home

all source is at github:

docs and other projects at

Tests & Coverage

for quick usage see see main in file

for test coverage look in the /tests directory to run tests pytest needs to be installed.

on Ubuntu

pip install -U pytest pytest-cov  pip install coveralls note: more info at for installation on other OSes


running basic tests

cd tests pytest #or py.test

coverage stats below

coverage run –source fifostr -m pytest coverage report -m “`

Release History

  • 1.1.9 rebuild for to README.rst conversion using pandoc (no code changes) for PyPi
  • 1.1.8 rebuild to make sure proper pkg loaded to PyPi (no code changes)
  • 1.1.7 updated to use README.rst
  • 1.1.6 added PyPi version badge in
  • 1.1.5 coverage to 100%, added badging, added README.rst
  • 1.1.x changed class name from fifostr to FIFOStr to make PEP8 compliant. fixed bug in (package_dir)
  • 1.0.x documentation clean up
  • 1.0.0 Initial release


documentation is in /docs directory (generated by pydoc) to (re)generate the docs. cd to the docs directory. then type: pydoc -w ../ note that as of this writing pydoc generates its output in the current directory and doesn’t seem to be pipeable to another. vs README.rst

The README.rst is generated from the using pandoc but the content is identical. This has to do with uneven support of markdown vs ReStructured Text on github vs PyPi.


See LICENSE.txt file in this directory. The license is the OSI approved “FreeBSD” 2 clause license.

File Type Py Version Uploaded on Size
FIFOStr-1.1.9.tar.gz (md5) Source 2017-03-30 15KB