Skip to main content

Fixtures, reusable state for writing clean tests and more.

Project description

Copyright (c) 2010, Robert Collins <robertc@robertcollins.net>

Licensed under either the Apache License, Version 2.0 or the BSD 3-clause license at the users choice. A copy of both licenses are available in the project source as Apache-2.0 and BSD. You may not use this file except in compliance with one of these two licences.

Unless required by applicable law or agreed to in writing, software distributed under these licenses is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the license you chose for the specific language governing permissions and limitations under that license.

Fixtures defines a Python contract for reusable state / support logic, primarily for unit testing. Helper and adaption logic is included to make it easy to write your own fixtures using the fixtures contract. Glue code is provided that makes using fixtures that meet the Fixtures contract in unittest compatible test cases easy and straight forward.

Dependencies

  • Python 2.6+ This is the base language fixtures is written in and for.

  • pbr Used for version and release management of fixtures.

  • testtools <https://launchpad.net/testtools> 0.9.22 or newer. testtools provides helpful glue functions for the details API used to report information about a fixture (whether its used in a testing or production environment).

For use in a unit test suite using the included glue, one of:

  • Python 2.7+

  • unittest2

  • bzrlib.tests

  • Or any other test environment that supports TestCase.addCleanup.

Writing your own glue code is easy, or you can simply use Fixtures directly without any support code.

To run the test suite for fixtures, testtools is needed.

Why Fixtures

Standard Python unittest.py provides no obvious method for making and reusing state needed in a test case other than by adding a method on the test class. This scales poorly - complex helper functions propogating up a test class hierarchy is a regular pattern when this is done. Mocking while a great tool doesn’t itself prevent this (and helpers to mock complex things can accumulate in the same way if placed on the test class).

By defining a uniform contract where helpers have no dependency on the test class we permit all the regular code hygiene activities to take place without the distorting influence of being in a class hierarchy that is modelling an entirely different thing - which is what helpers on a TestCase suffer from.

About Fixtures

A Fixture represents some state. Each fixture has attributes on it that are specific to the fixture. For instance, a fixture representing a directory that can be used for temporary files might have a attribute ‘path’.

Most fixtures have complete pydoc documentation, so be sure to check pydoc fixtures for usage information.

Creating Fixtures

Minimally, subclass Fixture, define _setUp to initialize your state and schedule a cleanup for when cleanUp is called and you’re done:

>>> import unittest
>>> import fixtures
>>> class NoddyFixture(fixtures.Fixture):
...     def _setUp(self):
...         self.frobnozzle = 42
...         self.addCleanup(delattr, self, 'frobnozzle')

This will initialize frobnozzle when setUp is called, and when cleanUp is called get rid of the frobnozzle attribute. Prior to version 1.3.0 fixtures recommended overriding setUp. This is still supported, but since it is harder to write leak-free fixtures in this fashion, it is not recommended.

If your fixture has diagnostic data - for instance the log file of an application server, or log messages, it can expose that by creating a content object (testtools.content.Content) and calling addDetail.

>>> from testtools.content import text_content
>>> class WithLog(fixtures.Fixture):
...     def _setUp(self):
...         self.addDetail('message', text_content('foo bar baz'))

The method useFixture will use another fixture, call setUp on it, call self.addCleanup(thefixture.cleanUp), attach any details from it and return the fixture. This allows simple composition of different fixtures.

>>> class ReusingFixture(fixtures.Fixture):
...     def _setUp(self):
...         self.noddy = self.useFixture(NoddyFixture())

There is a helper for adapting a function or function pair into Fixtures. it puts the result of the function in fn_result:

>>> import os.path
>>> import shutil
>>> import tempfile
>>> def setup_function():
...     return tempfile.mkdtemp()
>>> def teardown_function(fixture):
...     shutil.rmtree(fixture)
>>> fixture = fixtures.FunctionFixture(setup_function, teardown_function)
>>> fixture.setUp()
>>> print (os.path.isdir(fixture.fn_result))
True
>>> fixture.cleanUp()

This can be expressed even more pithily:

>>> fixture = fixtures.FunctionFixture(tempfile.mkdtemp, shutil.rmtree)
>>> fixture.setUp()
>>> print (os.path.isdir(fixture.fn_result))
True
>>> fixture.cleanUp()

Another variation is MethodFixture which is useful for adapting alternate fixture implementations to Fixture:

>>> class MyServer:
...    def start(self):
...        pass
...    def stop(self):
...        pass
>>> server = MyServer()
>>> fixture = fixtures.MethodFixture(server, server.start, server.stop)

The Fixture API

The example above introduces some of the Fixture API. In order to be able to clean up after a fixture has been used, all fixtures define a cleanUp method which should be called when a fixture is finished with.

Because it’s nice to be able to build a particular set of related fixtures in advance of using them, fixtures also have a setUp method which should be called before trying to use them.

One common desire with fixtures that are expensive to create is to reuse them in many test cases; to support this the base Fixture also defines a reset which calls self.cleanUp(); self.setUp(). Fixtures that can more efficiently make themselves reusable should override this method. This can then be used with multiple test state via things like testresources, setUpClass, or setUpModule.

When using a fixture with a test you can manually call the setUp and cleanUp methods. More convenient though is to use the included glue from fixtures.TestWithFixtures which provides a mixin defining useFixture (camel case because unittest is camel case throughout) method. It will call setUp on the fixture, call self.addCleanup(fixture) to schedule a cleanup, and return the fixture. This lets one write:

>>> import testtools
>>> import unittest

Note that we use testtools TestCase here as we need to guarantee a TestCase.addCleanup method in this doctest. Unittest2 - Python2.7 and above - also have addCleanup. testtools has it’s own implementation of useFixture so there is no need to use fixtures.TestWithFixtures with testtools.TestCase.

>>> class NoddyTest(testtools.TestCase, fixtures.TestWithFixtures):
...     def test_example(self):
...         fixture = self.useFixture(NoddyFixture())
...         self.assertEqual(42, fixture.frobnozzle)
>>> result = unittest.TestResult()
>>> _ = NoddyTest('test_example').run(result)
>>> print (result.wasSuccessful())
True

Fixtures implement the context protocol, so you can also use a fixture as a context manager:

>>> with fixtures.FunctionFixture(setup_function, teardown_function) as fixture:
...    print (os.path.isdir(fixture.fn_result))
True

When multiple cleanups error, fixture.cleanUp() will raise a wrapper exception rather than choosing an arbitrary single exception to raise:

>>> import sys
>>> from fixtures.fixture import MultipleExceptions
>>> class BrokenFixture(fixtures.Fixture):
...     def _setUp(self):
...         self.addCleanup(lambda:1/0)
...         self.addCleanup(lambda:1/0)
>>> fixture = BrokenFixture()
>>> fixture.setUp()
>>> try:
...    fixture.cleanUp()
... except MultipleExceptions:
...    exc_info = sys.exc_info()
>>> print (exc_info[1].args[0][0].__name__)
ZeroDivisionError

Fixtures often expose diagnostic details that can be useful for tracking down issues. The getDetails method will return a dict of all the attached details, but can only be called before cleanUp is called. Each detail object is an instance of testtools.content.Content.

>>> with WithLog() as l:
...     print(l.getDetails()['message'].as_text())
foo bar baz

Errors in setUp

The examples above used _setUp rather than setUp because the base class implementation of setUp acts to reduce the chance of leaking external resources if an error is raised from _setUp. Specifically, setUp contains a try:/except: block which catches all exceptions, captures any registered detail objects, and calls self.cleanUp before propogating the error. As long as you take care to register any cleanups before calling the code that may fail, this will cause them to be cleaned up. The captured detail objects are provided to the args of the raised exception.

If the error that occured was a subclass of Exception then setUp will raise MultipleExceptions with the last element being a SetupError that contains the detail objects. Otherwise, to prevent causing normally uncatchable errors like KeyboardInterrupt being caught inappropriately in the calling layer, the original exception will be raised as-is and no diagnostic data other than that from the original exception will be available.

Shared Dependencies

A common use case within complex environments is having some fixtures shared by other ones.

Consider the case of testing using a TempDir with two fixtures built on top of it; say a small database and a web server. Writing either one is nearly trivial. However handling reset() correctly is hard: both the database and web server would reasonably expect to be able to discard operating system resources they may have open within the temporary directory before its removed. A recursive reset() implementation would work for one, but not both. Calling reset() on the TempDir instance between each test is probably desirable but we don’t want to have to do a complete cleanUp of the higher layer fixtures (which would make the TempDir be unused and trivially resettable. We have a few options available to us.

Imagine that the webserver does not depend on the DB fixture in any way - we just want the webserver and DB fixture to coexist in the same tempdir.

A simple option is to just provide an explicit dependency fixture for the higher layer fixtures to use. This pushes complexity out of the core and onto users of fixtures:

>>> class WithDep(fixtures.Fixture):
...     def __init__(self, tempdir, dependency_fixture):
...         super(WithDep, self).__init__()
...         self.tempdir = tempdir
...         self.dependency_fixture = dependency_fixture
...     def setUp(self):
...         super(WithDep, self).setUp()
...         self.addCleanup(self.dependency_fixture.cleanUp)
...         self.dependency_fixture.setUp()
...         # we assume that at this point self.tempdir is usable.
>>> DB = WithDep
>>> WebServer = WithDep
>>> tempdir = fixtures.TempDir()
>>> db = DB(tempdir, tempdir)
>>> server = WebServer(tempdir, db)
>>> server.setUp()
>>> server.cleanUp()

Another option is to write the fixtures to gracefully handle a dependency being reset underneath them. This is insufficient if the fixtures would block the dependency resetting (for instance by holding file locks open in a tempdir - on Windows this will prevent the directory being deleted).

Another approach which fixtures neither helps nor hinders is to raise a signal of some sort for each user of a fixture before it is reset. In the example here, TempDir might offer a subscribers attribute that both the DB and web server would be registered in. Calling reset or cleanUp on the tempdir would trigger a callback to all the subscribers; the DB and web server reset methods would look something like:

>>> def reset(self):
...     if not self._cleaned:
...         self._clean()

(Their action on the callback from the tempdir would be to do whatever work was needed and set self._cleaned.) This approach has the (perhaps) suprising effect that resetting the webserver may reset the DB - if the webserver were to be depending on tempdir.reset as a way to reset the webservers state.

Another approach which is not currently implemented is to provide an object graph of dependencies and a reset mechanism that can traverse that, along with a separation between ‘reset starting’ and ‘reset finishing’ - the DB and webserver would both have their reset_starting methods called, then the tempdir would be reset, and finally the DB and webserver would have reset_finishing called.

Stock Fixtures

In addition to the Fixture, FunctionFixture and MethodFixture classes fixtures includes a number of precanned fixtures. The API docs for fixtures will list the complete set of these, should the dcs be out of date or not to hand. For the complete feature set of each fixture please see the API docs.

ByteStream

Trivial adapter to make a BytesIO (though it may in future auto-spill to disk for large content) and expose that as a detail object, for automatic inclusion in test failure descriptions. Very useful in combination with MonkeyPatch.

>>> fixture = fixtures.StringStream('my-content')
>>> fixture.setUp()
>>> with fixtures.MonkeyPatch('sys.something', fixture.stream):
...     pass
>>> fixture.cleanUp()

EnvironmentVariable

Isolate your code from environmental variables, delete them or set them to a new value.

>>> fixture = fixtures.EnvironmentVariable('HOME')

FakeLogger

Isolate your code from an external logging configuration - so that your test gets the output from logged messages, but they don’t go to e.g. the console.

>>> fixture = fixtures.FakeLogger()

FakePopen

Pretend to run an external command rather than needing it to be present to run tests.

>>> from testtools.compat import BytesIO
>>> fixture = fixtures.FakePopen(lambda _:{'stdout': BytesIO('foobar')})

MockPatchObject

Adapts mock.patch.object to be used as a Fixture.

>>> class Fred:
...     value = 1
>>> fixture = fixtures.MockPatchObject(Fred, 'value', 2)
>>> with fixture:
...     Fred().value
2
>>> Fred().value
1

MockPatch

Adapts mock.patch to be used as a Fixture.

>>> fixture = fixtures.MockPatch('subprocess.Popen.returncode', 3)

MockPatchMultiple

Adapts mock.patch.multiple to be used as a Fixture.

>>> fixture = fixtures.MockPatch('subprocess.Popen', returncode=3)

MonkeyPatch

Control the value of a named python attribute.

>>> def fake_open(path, mode):
...     pass
>>> fixture = fixtures.MonkeyPatch('__builtin__.open', fake_open)

NestedTempfile

Change the default directory that the tempfile module places temporary files and directories in. This can be useful for containing the noise created by code which doesn’t clean up its temporary files. This does not affect temporary file creation where an explicit containing directory was provided.

>>> fixture = fixtures.NestedTempfile()

PackagePathEntry

Adds a single directory to the path for an existing python package. This adds to the package.__path__ list. If the directory is already in the path, nothing happens, if it isn’t then it is added on setUp and removed on cleanUp.

>>> fixture = fixtures.PackagePathEntry('package/name', '/foo/bar')

PythonPackage

Creates a python package directory. Particularly useful for testing code that dynamically loads packages/modules, or for mocking out the command line entry points to Python programs.

>>> fixture = fixtures.PythonPackage('foo.bar', [('quux.py', '')])

PythonPathEntry

Adds a single directory to sys.path. If the directory is already in the path, nothing happens, if it isn’t then it is added on setUp and removed on cleanUp.

>>> fixture = fixtures.PythonPathEntry('/foo/bar')

StringStream

Trivial adapter to make a StringIO (though it may in future auto-spill to disk for large content) and expose that as a detail object, for automatic inclusion in test failure descriptions. Very useful in combination with MonkeyPatch.

>>> fixture = fixtures.StringStream('stdout')
>>> fixture.setUp()
>>> with fixtures.MonkeyPatch('sys.stdout', fixture.stream):
...     pass
>>> fixture.cleanUp()

TempDir

Create a temporary directory and clean it up later.

>>> fixture = fixtures.TempDir()

The created directory is stored in the path attribute of the fixture after setUp.

TempHomeDir

Create a temporary directory and set it as $HOME in the environment.

>>> fixture = fixtures.TempHomeDir()

The created directory is stored in the path attribute of the fixture after setUp.

The environment will now have $HOME set to the same path, and the value will be returned to its previous value after tearDown.

Timeout

Aborts if the covered code takes more than a specified number of whole wall-clock seconds.

There are two possibilities, controlled by the ‘gentle’ argument: when gentle, an exception will be raised and the test (or other covered code) will fail. When not gentle, the entire process will be terminated, which is less clean, but more likely to break hangs where no Python code is running.

Caution: Only one timeout can be active at any time across all threads in a single process. Using more than one has undefined results. (This could be improved by chaining alarms.)

Note: Currently supported only on Unix because it relies on the alarm system call.

Contributing

Fixtures has its project homepage on Launchpad <https://launchpad.net/python-fixtures>. Source code is hosted on GitHub <https://github.com/testing-cabal/fixtures>.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

fixtures-1.4.0.tar.gz (50.4 kB view hashes)

Uploaded Source

Built Distribution

fixtures-1.4.0-py2.py3-none-any.whl (64.8 kB view hashes)

Uploaded Python 2 Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page