fritzcollectd 0.4.0

Dependencies

• Python 2.7+

• fritzconnection

• collectd 4.9+

Installation

1. pip install fritzcollectd

2. Configure the plugin as shown below

3. Restart collectd

Prerequisites

In order to be able to read the status information the option “Transmit status information over UPnP” has to be enabled in the “Network Settings” menu on the Fritz!BOX. This is exaplained in AVM’s Knowledge Base.

Configuration

Add the following to your collectd config (typically /etc/collectd.conf):

<LoadPlugin python>
    Globals true
</LoadPlugin>
...
<Plugin python>
    Import "fritzcollectd"

    #<Module fritzcollectd>
    #    Address "fritz.box"
    #    Port 49000
    #    User "dslf-config"
    #    Password "pass"
    #    Hostname "FritzBox"
    #    Instance "1"
    #</Module>
</Plugin>

The plugin recognizes several (optional) configuration parameters. In most cases the plugin works without any of these parameters. It might be necessary to specify Address if the router’s host name has been changed.

• Address: The network address of the FRITZ!Box.

• Port: The TCP port of the FRITZ!Box.

• User: The login user name on the FRITZ!Box.

• Password: The password on the FRITZ!Box for authentication.

• Instance: Plugin instance that collectd associates with the data.

• Hostname: Hostname that collectd associates with the data (defaults to the host executing this plugin)

The module block can be repeated to monitor multiple routers.

Further Information

Please refer to the project announcement blog post for additional information, such as the usage of Grafana for metrics visualization.

License

This projected is licensed under the terms of the MIT license.