Skip to main content

A namespace package for a number of useful sub-packages and modules.

Project description

The PLIB package contains a number of useful sub-packages and modules, all within the plib package namespace in order to minimize clutter in the top-level namespace of your Python installation. Each sub-directory of the plib directory contains a sub-package, except for the test directory, which contains the PLIB test suite. The source distribution also contains an examples directory, which has example programs using PLIB, and a scripts directory, which has a few post-install scripts. (The SetupHelper directory in the source distribution is not installed; it contains a helper module for PLIB’s setup script. SetupHelper is available as a separate package from PyPI under the name setuphelper.)

NOTE: This is the “legacy” version of PLIB, with support for older versions of Python (those that require any of the “backported” implementations of builtins and standard library functionality that PLIB provides). This version will not receive any future updates except for critical bug fixes, if any.

The PLIB Sub-Packages

The individual sub-packages and modules contain docstrings with more information about their usage; here they are briefly listed and described.

PLIB.CLASSES

Each of the modules in this sub-package contains a single class with the same name; the ModuleProxy class from the PLIB.UTILS sub-package is used to make all the classes appear in the plib.classes namespace. See the sub-package and ModuleProxy docstrings for more information.

The classes in this sub-package are mostly a miscellaneous group, included for no other reason than that I have found them useful. The only common theme shared by some of them is implementation of common “policy” for I/O clients and servers, on top of the basic mechanisms provided by the I/O channel classes in plib.stdlib.

PLIB.EXTENSIONS

This sub-package provides a namespace for functions (and possibly, in the future, other objects) exported from an extension module written using the Python/C API. The general philosophy of PLIB is to do everything possible in pure Python, so the only functions that appear in this sub-package are those which by their very nature cannot be done in pure Python.

PLIB.GUI

This is the largest sub-package, and contains a simple GUI application framework with two main features:

  • It lets the same high-level code work with a number of different underlying GUI toolkits. Currently supported: Qt (versions 3 and 4), KDE (versions 3 and 4), wxWidgets, and GTK. (The original reason for writing this sub-package was that wxWidgets doesn’t use Qt and I like the Qt/KDE widgets better, but I wanted code that would run cross-platform.)

  • It allows you to express the layout of your GUI in terms of Python lists and dicts, enabling a much more declarative and easy to read (and maintain) coding style.

Other than selecting the toolkit (which may not be necessary: the main module of the sub-package can ‘auto-detect’ which toolkit to use–the plib-setup-gui post-install script does most of the work to enable this–so you only need to override if you don’t like the default), you should not have to worry about any toolkit internal details; the goal of this sub-package is to make them all look the same to your code.

Note that the GTK toolkit support in this sub-package is “experimental” and may be removed if it proves to be more trouble than it’s worth. It’s currently included because wxWidgets’ behavior when using GTK as its underlying GUI framework has some quirks that I haven’t been able to work around yet. However, the GTK implementation of a number of widgets (particularly tables and list/tree views) is much less capable than the wxWidgets one, so the Python code for GTK ends up relying much more on ugly hacks.

PLIB.INI

This sub-package implements an abstract ‘INI file’ API that uses ConfigParser on POSIX systems, and the Windows registry on Windows systems. As with the PLIB.GUI sub-package, the goal is to hide the internal details of the configuration storage from your code, so all you have to do is define your configuration structure, again using native Python data types (lists and dicts).

PLIB.STDLIB

This is a namespace for various functions and classes that extend or emulate the Python standard library. Some, like the cached_property decorator, are implementations of patterns that have been known for some time, but which don’t have a “canonical” version in the stdlib yet; rather than have PLIB depend on some other third-party package, I’ve simply provided my own implementations here. Others, like the abstractcontainer class and its subclasses, are re-implementations of standard Python data structures, written to enable PLIB to make as many things as possible look like those data structures without having to subclass the built-ins (which has some downsides for the use cases I’ve had thus far–see the docstrings for more information).

The plib.stdlib namespace also contains a convenience function. upgrade_builtins; calling this function adds equivalents to the __builtin__ module namespace for built-in functions that are not present in the running version of Python but are present in later versions. This is more convenient than having to worry about importing such equivalents from plib.stdlib; as a consequence, a number of functions are now removed from the plib.stdlib namespace and are instead provided by this function when the built-in equivalents are not present. In this version of plib, you need to call this function somewhere in your code (but only once); future versions may automagically invoke it as long as you import anything from plib. I should also note that I have snuck in a few extra “built-ins” that are not in the Python standard library but IMHO should be. :-) See the docstrings for more details.

There are also five modules visible in this sub-package namespace:

  • The coll module provides two slightly customized collection classes, fifo and stack, with a common API. This module also includes the contents of the collections module from the standard library, so you don’t have to import both modules; in addition, for Python versions where some of the classes are not yet present (defaultdict and/or namedtuple), equivalents are provided. (The equivalent implementation of namedtuple is taken from the ActiveState recipe that led to the Python 2.6 implementation.)

  • The decotools module provides functions and factories for working with decorators.

  • The func module provides an alternate implementation of the functools module in the Python standard library for Python versions prior to 2.5 (in 2.5 and later it simply makes the functools module contents appear in its namespace, so you can safely from plib.stdlib import func instead of import functools and use the same functionality).

  • The options module provides an easier-to-use overlay for the optparse module which allows you to express your option configuration in the form of Python lists, tuples, and dicts, and also adds some minimal argument checking functionality. (NOTE: In Python 2.7 and later, this module now uses the argparse module, since the optparse module is deprecated. The argparse module provides additional functionality for arguments, which can be accessed by making the arglist parameter to the parse_options function a sequence of 2-tuples to include keyword arguments, similar to what is done for options.)

  • The timer module provides functions for timing code, with an alternate API to the standard library’s timeit module that is easier to use when timing functions that you already have as objects, instead of source code strings.

PLIB.STDLIB.IO

This sub-package contains classes that encapsulate various forms of client/server I/O channels. It is organized into sub-packages itself to make the namespace easier to use; the sub-packages fall into three categories, and each sub-package in a given category contains the same basic class names, so they’re easier to remember. The categories are:

  • Device Types: socket and serial. Each device type has a BaseClient and BaseServer class; the socket type also has a BaseRequest class. These will usually not need to be used directly; they are used by the I/O mode classes, and are factored out so that each I/O mode sees the same API for a given device type.

  • I/O modes: async and blocking (the latter does not just mean synchronous: it includes a forking TCP socket server). Each I/O mode has a client and server class for both device types, and a request class for the socket device type: the class names are SerialClient, SerialServer, SocketClient, SocketServer, and BaseRequestHandler. The async type also has “persistent” classes, which support full-duplex asynchronous communication; these are the PersistentSerial, PersistentSocket, and PersistentRequestHandler classes. Mixin versions of these classes (class names with Mixin at the end) are also provided, for use if alternate data handling is desired (see next bullet), but it is normally not necessary to use these “by hand”–see “automatic mixins” below.

  • Data Handling: the I/O mode classes given above include basic data handling, but it is very basic: the only way it can detect that a “message” has been fully received is to detect a closed channel. For some applications this is enough, but often more sophisticated and robust data handling is needed. The data sub-package provides three mixin classes for this purpose, ShutdownReadWrite, TerminatorReadWrite and ReadWrite. The first of these detects the end of a received message by a shutdown of the other end of the data channel, but keeps the channel open to allow further writes (all the other classes default to closing the channel when the other end closes). The other two classes allow the detection of multiple “messages” in the data stream, either by detecting a “terminator” string or by having each message include its length at the beginning. These classes also format outgoing messages the same way.

Automatic Mixins: To derive your own client or server classes with alternate data handling “by hand”, you would need to use the “mixin” versions of the appropriate I/O mode classes, and splice the data handling class into the middle of the base class list; for example:

from plib.stdlib.io.async import SerialClientMixin, SerialBase
from plib.stdlib.io.data import TerminatorReadWrite

class AsyncSerialClientWithTerminator(SerialClientMixin,
    TerminatorReadWrite, SerialBase): pass

This is a bit clumsy, but necessary since the read/write handling has to be before the client/server class in the MRO, but after the base device type, for the cooperative super calls that underlie the functionality to work properly. However, since the pattern is the same in each case, it can be automated, and this has been done in the async and blocking sub-package namespaces, so that instead of doing the above class construction “by hand”, you can just append a suffix to your desired class name, thus:

from plib.stdlib.io.async import SerialClientWithTerminator

The WithTerminator suffix (or, alternately, WithShutdown or WithReadWrite) will cause the equivalent of the above class definition to occur on the fly, so that the resulting class appears in the plib.stdlib.io.async namespace (of course the plib.stdlib.io.blocking namespace has the same capability). Once this has happened the first time, however, the class definition is stored in the appropriate namespace, so additional imports of the same class name (in different modules of your application) will not re-do the “on the fly” construction; they will just retrieve the same class object that was previously constructed.

The above machinery is also made available for use with your own custom read/write handling classes; the async and blocking sub-packages each export a get_readwrite_class function that does the same on-the-fly class definition as above, but with your custom read/write class instead of one of the built-in ones. All you have to do is pass the function the name of your desired I/O class and your custom read/write class object:

from plib.stdlib.io import async

class CustomReadWrite(object):
    # class definition

MyAsyncSerialClient = async.get_readwrite_class('SerialClient',
    CustomReadWrite)

API Notes: One of the goals of this sub-package is to provide a common, consistent API for all the different types of I/O, so that switching one specific implementation of a certain functionality for another can be done transparently to the rest of your application’s code. Thus, all of the usable classes follow the same basic pattern of mixing in the various pieces of functionality: from left to right in a class’s MRO, one finds the type of endpoint (a client or server mixin class, which may be specialized to the type of I/O), the type of data formatting, if any (a mixin class from the ReadWrite module), and the type of I/O, including device type (socket, serial port, etc.), mode (non-blocking/asynchronous vs. blocking), and basic data handling. Also, each endpoint type has a common API independent of the specific type of I/O and mode; a client can always use the client_communicate method to send data to the server and receive a response; a server can always use the serve_forever method to start itself; and all I/O objects override the same methods to implement application-specific functionality: process_data, to deal with data as it comes in, and query_done, to determine when the I/O channel should be closed. (To see examples of all this in action, look at the test suite in test_stdlib_io.py and the library module for it, stdlib_io_testlib.py; the library module can use the same mixin classes to implement test functionality for all of the different mixes of I/O classes in the test suite.)

PLIB.UTILS

This sub-package contains some miscellaneous useful functions and modules, and also the ModuleProxy class referred to above.

PLIB.XML

This sub-package requires the lxml extension, which uses the very fast libxml2 library but provides a Pythonic API similar to ElementTree. The reason for using lxml instead of ElementTree itself is that lxml has two key additional features:

  • Custom element classes: the classes module in this sub-package builds on this feature by using metaclasses to automate DTD generation and validation, but the feature is also great for many XML applications.

  • Full and fast XPATH support: this was key in the XML application that first prompted me to write this sub-package. Yes, I know there are plenty of other Python XML packages that do XPATH; the point is to have it plus the standard ElementTree API plus the speed of libxml2.

Installation

To install PLIB, you can simply run:

$ python setup.py install

at a shell prompt from the directory into which you unzipped the source tarball (the same directory that this README file is in). This will install PLIB and then run each of the post-install scripts in the scripts directory.

Example Programs

PLIB comes with example programs that illustrate key features of the package. After installation, these can be found in the $PREFIX/share/plib/examples directory. If you have a POSIX system (Linux or Mac OSX), the plib-setup-examples post-install script will install symlinks to the example programs in the $PREFIX/bin directory.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

plib2-0.7.3.tar.gz (521.7 kB view hashes)

Uploaded Source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page