Skip to main content

Plugin for ploy to provision FreeBSD jails using ezjail.

Project description

Overview

The ploy_ezjail plugin provides integration of ezjail with ploy to manage FreeBSD jails.

Installation

ploy_ezjail is best installed with easy_install, pip or with zc.recipe.egg in a buildout.

Masters

To use ploy_ezjail you need a host running FreeBSD on which you want to manage jails.

You declare a master with [ez-master:masterid] where masterid is the name you want to use for this master. Now you can either add options like for a plain ploy instance, or you can use the instance option to refer to another instance from your config like this:

[ez-master:master1]
host = myhost.example.com

[plain-instance:foohost]
host = foohost.example.com

[ez-master:master2]
instance = foohost

The latter is most useful in conjunction with other ploy backend plugins, as it allows you to easily switch between provisioners, i.e. to have an ez-master provisioned on VirtualBox during development and on a plain instance in production.

Options

debug-commands

If set to yes, the commands executed on the host are echoed locally.

instance

The instance to use as host for this master. If empty, the local machine is used without an ssh connection.

ezjail-admin

Path to the ezjail-admin script on the host. Defaults to /usr/local/bin/ezjail-admin.

sudo

Use sudo to run commands on the host.

Instances

At the moment all jails will be created using ZFS (the -c zfs option of ezjail-admin), so the host needs to be setup accordingly.

Options

ip

The ip address to use for the jail. Required

flavour

The flavour to use for this jail. This is explained in the ezjail docs.

ezjail-name

The name to use for the jail. By default the id of the instance is used.

mounts

Additional mount points for the jail. You can specify one mount point per line. The format is:

src=SRC dst=DST [ro=true] [create=true]

The src is the path on the host, dst is the path inside the jail.

If ro is set to true, then the mount is read only.

When create is enabled, then the src path is created with mkdir -p. The dst path is always created inside the jail with mkdir -p.

You can reference ZFS sections inside src with {zfs[name]} where name is the ez-zfs section name. You can use the name of the jail instance with {name}} in both src and dst. Examples:

src=/foo dst=/foo
src={zfs[backup]} dst=/bak
src={zfs[data]}/{name} dst=/mnt/data create=true
src={zfs[static]} dst=/mnt/static ro=true
no-terminate

If set to yes, the jail can’t be terminated via ploy until the setting is changed to no or removed entirely.

startup_script

Path to a local script (relative to the location of the configuration file) which will be run inside the jail right after creation and first start of the jail.

rc_require

String that indicates which other jails this jail requires to start up, effectively allowing you to define the startup order of jails. See rcorder(8) for more details. This value is written upon each startup of the jail not just when it is created initially, so to have changes take effect, it’s sufficient to restart it. Optional

rc_provide

String that indicates what this jail provides. ezjail itself always sets its jails to provide standard_ezjail to which ploy_ezjail adds the name of the jail. IOW if you simply want to build a startup order using the names of the jails, you will not need to set this value. If you want this jail to provide any additional values, set them here. This value is written upon each startup of the jail not just when it is created initially, so to have changes take effect, it’s sufficient to restart it. Optional

ZFS sections

You can specify ZFS filesystems via [ez-zfs:name] sections. This is used in mounts of jails to get the mountpoint and verify that the path exists and is it’s own ZFS filesystem. You can also create new ZFS filesystems with the create option.

Options

create

If set to yes, the filesystem is created when first used.

path

Specifies the path of this filesystem. This is not the mountpoint, but the ZFS path. You can reference other ZFS sections with {zfs[name][path]}. The name is the name of the referenced ZFS section. The [path] at the end is mandatory, as otherwise you would get the mountpoint of the referenced ZFS section. Examples:

[ez-zfs:data]
path = tank/data

[ez-zfs:shared]
path = {zfs[data][path]}/shared

[ez-zfs:jails]
path = {zfs[data][path]}/jails

[ez-zfs:backup]
create = true
path = tank/backup

Changelog

1.4.0 - 2015-10-16

  • Allow setting the jail name via ezjail-name instead of using the instance id as the default. [fschulze]

1.3.0 - 2015-09-03

  • Improved error handling with useful error messages instead of tracebacks. [fschulze]

  • Allow setting startup order of jails. [tomster]

1.2.0 - 2015-03-05

  • Use new Executor helper from ploy 1.2.0 which handles ssh agent forwarding. [fschulze]

  • Enable “local mode” where if the instance option is empty all commands are executed locally. [fschulze]

1.1.0 - 2014-10-27

  • Print status of all jails when requesting status of master. [fschulze]

  • Check jail status before trying to connect. [fschulze]

  • Use new helper in ploy 1.0.2 to setup proxycommand. [fschulze]

1.0.0 - 2014-07-19

  • Added documentation. [fschulze]

1.0b9 - 2014-07-08

  • Packaging and test fixes. [fschulze]

1.0b8 - 2014-07-04

  • Python 3 compatibility. [fschulze]

  • Renamed mr.awsome to ploy and mr.awsome.ezjail to ploy_ezjail. [fschulze]

1.0b7 - 2014-06-16

  • Provide default values for proxyhost and proxycommand options. [fschulze]

  • Merge config of ez-master with the instance it’s using. [fschulze]

1.0b6 - 2014-06-11

  • Pass changes of proxy instance config on to the proxied instance config. [fschulze]

1.0b5 - 2014-06-10

  • Forcefully destroy jail. Together with ezjail 3.4.1 this solves the issue that sometimes the ZFS filesystem wasn’t removed and the jail couldn’t be started without manual intervention. [fschulze]

1.0b4 - 2014-05-22

  • Clear out massagers after copying the config for the proxy instance to prevent conflicts when the proxy instance is created. [fschulze]

1.0b3 - 2014-05-21

  • Fixes to make [instance:...] using an ez-master work. [fschulze]

1.0b2 - 2014-05-15

  • Added instance option to ez-master section to use another instance as the jail host. [fschulze, tomster]

  • Moved setuptools-git from setup.py to .travis.yml, it’s only needed for releases and testing. [fschulze]

1.0b1 - 2014-03-24

  • Initial release [fschulze]

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distributions

ploy_ezjail-1.4.0.zip (20.6 kB view hashes)

Uploaded source

ploy_ezjail-1.4.0.tar.gz (15.1 kB view hashes)

Uploaded source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page