skip to navigation
skip to content

Not Logged In

pypcapfile 0.9.1

Pure Python package for reading and parsing libpcap savefiles.

Package Documentation

pypcapfile is a pure Python library for handling libpcap savefiles.

Installing

The easiest way to install is from
sudo pip install pypcapfile
Note that for pip, the package name is pypcapfile; in your code you will need to
import pcapfile.
Alternatively, you can install from source. Clone the repository, and run setup.py with
an install argument:
git clone git://github.com/kisom/pypcapfile.git
cd pypcapfile
./setup.py install
This does require the Python distutils to be
installed.

Introduction

The core functionality is implemented in pcapfile.savefile:

>>> from pcapfile import savefile
>>> testcap = open('test.pcap')
>>> capfile = savefile.load_savefile(testcap, verbose=True)
[+] attempting to load test.pcap
[+] found valid header
[+] loaded 11 packets
[+] finished loading savefile.
>>> print capfile
little-endian capture file version 2.4
snapshot length: 65535
linklayer type: LINKTYPE_ETHERNET
number of packets: 11

You can take a look at the packets in capfile.packets:

>>> pkt = capfile.packets[0]
>>> pkt.raw()
<binary data snipped>
>>> pkt.timestamp
1343676707L
Right now there is very basic support for Ethernet frames and IPv4 packet
parsing.

Automatically decoding layers

The layers argument to load_savefile determines how many layers to
decode; the default value of 0 does no decoding, 1 will load only the link
layer, etc… For example, with no decoding:
>>> from pcapfile import savefile
>>> from pcapfile.protocols.linklayer import ethernet
>>> from pcapfile.protocols.network import ip
>>> import binascii
>>> testcap = open('samples/test.pcap')
>>> capfile = savefile.load_savefile(testcap, verbose=True)
[+] attempting to load samples/test.pcap
[+] found valid header
[+] loaded 3 packets
[+] finished loading savefile.
>>> eth_frame = ethernet.Ethernet(capfile.packets[0].raw())
>>> print eth_frame
ethernet from 00:11:22:33:44:55 to ff:ee:dd:cc:bb:aa type IPv4
>>> ip_packet = ip.IP(binascii.unhexlify(eth_frame.payload))
>>> print ip_packet
ipv4 packet from 192.168.2.47 to 173.194.37.82 carrying 44 bytes

and this example:

>>> from pcapfile import savefile
>>> testcap = open('samples/test.pcap')
>>> capfile = savefile.load_savefile(testcap, layers=1, verbose=True)
[+] attempting to load samples/test.pcap
[+] found valid header
[+] loaded 3 packets
[+] finished loading savefile.
>>> print capfile.packets[0].packet.src
00:11:22:33:44:55
>>> print capfile.packets[0].packet.payload
<hex string snipped>

and lastly:

>>> from pcapfile import savefile
>>> testcap = open('samples/test.pcap')
>>> capfile = savefile.load_savefile(testcap, layers=2, verbose=True)
>>> print capfile.packets[0].packet.payload
ipv4 packet from 192.168.2.47 to 173.194.37.82 carrying 44 bytes
The IPv4 module (ip) currently only supports basic IP headers, i.e. it
doesn’t yet parse options or add in padding.

The interface is still a bit messy.

Future planned improvements

  • IP option handling
  • IPv6 support
  • TCP and UDP support
  • ARP support

TODO

  1. write unit tests
  2. add __repr__ method that shows all of the values of the fields in IP packets and Ethernet frames.

See also

Contributors

A list of the project’s contributors may be found in the AUTHORS file.

 
File Type Py Version Uploaded on Size
pypcapfile-0.9.1.tar.gz (md5) Source 2015-07-20 14KB
  • Downloads (All Versions):
  • 84 downloads in the last day
  • 718 downloads in the last week
  • 1701 downloads in the last month