Skip to main content

Python interface to the DBpedia Spotlight REST API

Project description

is a thin python wrapper around DBpedia Spotlight’s REST Interface.

This package is tested against DBpedia Spotlight version 0.7. As long as there are no major API overhauls, this wrapper might also work with future versions. If you encounter a bug with a newer DBpedia Spotlight version, feel free to create an issue here on github.

Note that we’re trying to track DBpedia Spotlight release version numbers, so you can easily see which pyspotlight version has been tested with which Spotlight release. For example, all pyspotlight 0.6.x releases are compatible with Spotlight 0.6.x, etc. While we aim for backwards-compatibility with older Spotlight releases, it is not guaranteed. If you’re using an older Spotlight version, you may need to use an older pyspotlight version as well.

Installation

The newest stable release can be found on the Python Package Index (PyPI).

Therefore installation is as easy as:

pip install pyspotlight

Older releases can be installed by specifying a version:

pip install pyspotlight~=0.6.1

Requirements for installation from source/github

This module has been tested with Python 2.7 and Python 3.5.

As long as you use the setup.py for the installation (python setup.py install), you’ll be fine because Python takes care of the dependencies for you.

If you decide not to use the setup.py you will need the requests library.

All of these packages can be found on the Python PackageIndex and easily installed via either easy_install or, the recommended, pip.

Using pip it is especially easy because you can just do this:

pip install -r requirements.txt

and it will install all package dependencies listed in that file.

Usage

Usage is simple and easy, just as the API is:

>>> import spotlight
>>> annotations = spotlight.annotate('http://localhost/rest/annotate',
...                                  'Your test text',
...                                  confidence=0.4, support=20)

This should return a list of all resources found within the given text. Assuming we did this for the following text:

President Obama on Monday will call for a new minimum tax rate for individuals making more than $1 million a year to ensure that they pay at least the same percentage of their earnings as other taxpayers, according to administration officials.

We might get this back:

>>> spotlight.annotate('http://localhost/rest/annotate', sample_txt)
[
  {
    'URI': 'http://dbpedia.org/resource/Presidency_of_Barack_Obama',
    'offset': 0,
    'percentageOfSecondRank': -1.0,
    'similarityScore': 0.10031112283468246,
    'support': 134,
    'surfaceForm': 'President Obama',
    'types': 'DBpedia:OfficeHolder,DBpedia:Person,Schema:Person,Freebase:/book/book_subject,Freebase:/book,Freebase:/book/periodical_subject,Freebase:/media_common/quotation_subject,Freebase:/media_common'
  },
  …(truncated remaining elements)…
]

Any additional filter parameters that are supported by the Spotlight API can be passed to the filters argument in a dictionary.

For example:

>>> only_person_filter = {
...     'policy': "whitelist",
...     'types': "DBpedia:Person",
...     'coreferenceResolution': False
... }

>>> spotlight.annotate(
...     "http://localhost/rest/annotate",
...     "Any collaboration between Shakira and Metallica seems highly unlikely.",
...     filters=only_person_filter
... )

[{
    'URI': 'http://dbpedia.org/resource/Shakira',
    'offset': 26,
    'percentageOfSecondRank': 1.511934771738109e-09,
    'similarityScore': 0.9999999984880361,
    'support': 2587,
    'surfaceForm': 'Shakira',
    'types': 'Schema:MusicGroup,DBpedia:Agent,Schema:Person,DBpedia:Person,DBpedia:Artist,DBpedia:MusicalArtist'
}]

The same parameters apply to the spotlight.candidates function, which returns a list of all matching candidate entities rather than only the top candidate.

Note that the Spotlight API may support other interfaces that have not been implemented in pyspotlight. Feel free to contribute :-)!

Running DBpedia Spotlight

If you just want to play around with Spotlight, there is an interactive demo available at demo.dbpedia-spotlight.org. To submit pyspotlight requests to the demo servers, you may use the endpoints found in sites.xml.

For any significant Spotlight usage, it is strongly recommended to run your own server. Please follow the installation instructions.

Exceptions

The following exceptions can occur:

  • ValueError when:

    • the JSON response could not be decoded.

  • SpotlightException when:

    • the JSON response did not contain any needed fields or was not formed as excepted.

    • You forgot to explicitly specify a protocol (http/https) in the API URL.

    Usually the exception’s message tells you exactly what is wrong. If not, we might have forgotten some error handling. So just open up an issue on github if you encounter unexpected exceptions.

  • requests.exceptions.HTTPError

    Is thrown when the response http status code was not 200. This could happen if you have a load balancer like nginx in front of your spotlight cluster and there is not a single server available, so nginx throws a 502 Bad Gateway.

Tips

We highly recommend playing around with the confidence and support values. Furthermore it might be preferable to filter out more annotations by looking at their similiarityScore (read: contextual score).

If you want to change the default values, feel free to use itertools.partial to create a little wrapper with simplified signature:

>>> from spotlight import annotate
>>> from functools import partial
>>> api = partial(annotate, 'http://localhost/rest/annotate',
...               confidence=0.4, support=20,
...               spotter='SpotXmlParser')
>>> api('This is your test text. This function uses a non-default
...      confidence, support, and spotter. Furthermore all calls go
...      directly to localhost/rest/annotate.')

As you can see this reduces the function’s complexity greatly. Pyspotlight provides an interface based on functions rather than classes, to avoid an unnecessary layer of indirection.

Tests

If you want to run the tests, you will have to install nose2 (~0.6) from PyPI. Then you can simply run nose2 from the command line in this or the spotlight/ directory.

All development and regular dependencies can be installed with a single command:

pip install -r requirements-dev.txt

Bugs

In case you spot a bug, please open an issue and attach the raw response you sent. Have a look at ubergrape/pyspotlight#3 for an example on how to file a good bug report.

Changelog

v0.7.2 (2017-12-02)

  • Updated README instructions and links. [Alex Olieman]

  • Ensure that candidates returns surface forms as strings. [Alex Olieman]

  • Ensure that surface forms are always strings (merge PR #1). [ShomyLiu & Alex Olieman]

v0.7.1 (2016-07-25)

  • Moved the shared request logic in annotate and candidates to a helper function. [Alex Olieman]

  • Updated setup/package files [Alex Olieman]

  • Updated README. [Luis Nell & Alex Olieman]

v0.7.0 (2016-07-18)

API Changes

  • Changed default spotter to 'Default' for 0.7 compatibility. [Alex Olieman]

  • Moved filter parameters into a filters argument. [Alex Olieman]

    • Removed the policy argument from annotate and candidates.

    • Added a types parameter, which enables server-side filtering of resources. It also makes for a nice addition to the policy parameter.

Additions

  • Python 3 compatibility. [Alex Olieman]

  • Moved to nose2 for tests. [Alex Olieman]

Fixes

  • Updated required version of the requests package. [Alex Olieman]

  • Remove mutable default arguments. [Luis Nell]

v0.6.5.2 (2013-08-27)

  • Add manifest so README is included on PyPI. [Luis Nell]

v0.6.5.1 (2013-08-12)

  • Update README for PyPI release. [Luis Nell]

  • Upgrade to requests 1.2.3. [Luis Nell]

  • BSD License. [Luis Nell]

  • Workaround for footnotes in surfaceForm that get parsed as a list. [Luis Nell]

  • Do not assume in candidates that surfaceForm is always a list. [Luis Nell]

v0.6.5 (2012-10-07)

API Changes

  • Have to explicitly provide a protocol in the URL. [Luis Nell]

Additions

  • Added stuff for testing. [Luis Nell]

  • Add requirements.txt for pip. [Luis Nell]

  • Make use of requests builtin json decoding. [Luis Nell]

Fixes

  • Some README updates. [Luis Nell]

  • Add ordereddict requirement for py2.6. [Luis Nell]

  • Tests: adapt to the requests raw handling. [Luis Nell]

  • Use requests 0.14.1 from now on. [Luis Nell]

  • Fixed typos, wrong link. [Pablo Mendes]

    • Minor: We spell it DBpedia, not DBPedia :)

    • Fix: Link pointed to OpenCalais, a commercial closed-source alternative to DBpedia Spotlight

v0.5.3 (2012-08-01)

  • Update README to reflect the exception changes. [Luis Nell]

  • Raise requests.exceptions.HTTPError on response.status_code != 200. [Luis Nell]

  • Prefer simplejson to json. [Luis Nell]

  • Add tests for new exception handling. [Luis Nell]

  • Add Exception Handling. [Luis Nell]

v0.5.2 (2012-04-06)

  • Fixes setup.py issues. v0.5.2. [Luis Nell]

v0.5.1 (2012-03-21)

  • Fix setup.py - push 0.5.1. [Luis Nell]

v0.5.0 (2012-03-20)

  • Init. [Luis Nell]

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

pyspotlight-0.7.2.tar.gz (12.0 kB view hashes)

Uploaded Source

Built Distribution

pyspotlight-0.7.2-py2.py3-none-any.whl (15.1 kB view hashes)

Uploaded Python 2 Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page