python-ipmi 0.5.5

Features

• native RMCP interface

• legacy RMCP interface (using ipmitool as backend)

• RMCP+ interface (using ipmitool as backend)

• system (KCS) interface (using ipmitool as backend)

• IPMB interface using the Total Phase Aardvark

• IPMB interface using ipmb-dev driver on Linux

Tested Devices

• Kontron mTCA Carrier Manager

• Kontron CompactPCI boards

• Pigeon Point Shelf Manager

• HPE iLO3/iLO4

• N.A.T. NAT-MCH

• DESY MMC STAMP & related AMCs (DAMC-FMC2ZUP, DAMC-FMC1Z7IO)

Requirements

For IPMB interface a Total Phase Aardvark is needed. Another option is to use ipmb-dev driver on Linux with an I2C bus, driver of which supports slave mode: https://www.kernel.org/doc/html/latest/driver-api/ipmb.html

For legacy RMCP, RMCP+ and system interface (KCS) the installtion of ipmitool is required.

Installation

pip install python-ipmi

python setup.py install

Documentation

You can find the most up to date documentation at: http://python-ipmi.rtfd.org

Example

Below is an example that shows how to setup the interface and the connection using the ipmitool as backend with both network and serial interfaces.

Example with lan interface:

import pyipmi
import pyipmi.interfaces

# Supported interface_types for ipmitool are: 'lan' , 'lanplus', and 'serial-terminal'
interface = pyipmi.interfaces.create_interface('ipmitool', interface_type='lan')

connection = pyipmi.create_connection(interface)

connection.target = pyipmi.Target(0x82)
connection.target.set_routing([(0x81,0x20,0),(0x20,0x82,7)])

connection.session.set_session_type_rmcp('10.0.0.1', port=623)
connection.session.set_auth_type_user('admin', 'admin')
connection.session.establish()

connection.get_device_id()

ipmitool command:

ipmitool -I lan -H 10.0.0.1 -p 623 -U "admin" -P "admin" -t 0x82 -b 0 -l 0 raw 0x06 0x01

Example with serial interface:

import pyipmi
import pyipmi.interfaces

interface = pyipmi.interfaces.create_interface('ipmitool', interface_type='serial-terminal')

connection = pyipmi.create_connection(interface)

connection.target = pyipmi.Target(0xb2)

# set_session_type_serial(port, baudrate)
connection.session.set_session_type_serial('/dev/tty2', 115200)
connection.session.establish()

connection.get_device_id()

ipmitool command:

ipmitool -I serial-terminal -D /dev/tty2:115200 -t 0xb2 -l 0 raw 0x06 0x01

Compatibility

Python > 3.6 is currently supported. Python 2.x is deprecated.

Contributing

Contributions are always welcome. You may send patches directly (eg. git send-email), do a github pull request or just file an issue.

• respect the coding style (eg. PEP8),

• provide well-formed commit message (see this blog post.)

• add a Signed-off-by line (eg. git commit -s)

License

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA