skip to navigation
skip to content

Not Logged In

python-monascaclient 1.0.1

Monasca API Client Library

Latest Version: 1.0.22

This is a client library for Monasca built to interface with the Monasca API. It provides a Python API (the monascaclient module) and a command-line tool (monasca).

The Monasca Client was written using the OpenStack Heat Python client as a framework.

Ubuntu Install

Requires:
  • pip - version >= 1.4. python get-pip.py
Install It:
  • sudo pip install python-monascaclient
Alternative Manual Install Steps:
  • cd to your python-monascaclient repo
  • sudo pip install -r requirements.txt
  • python setup.py install

Command-line API

Installing this distribution gets you a shell command, monasca, that you can use to interact with the Monitoring API server.

Usage:

monasca

monasca help

monasca help <command>

monasca -j <command>

This outputs the results in jason format. Normally output is in table format.

The monascaclient CLI needs the Monasca API endpoint url and the OS_AUTH_TOKEN to pass to the Monasca API RESTful interface. This is provided through environment or CLI parameters.

Environmental Variables

Environmental variables can be sourced, or optionally passed in as CLI arguments. It is easiest to source them first and then use the CLI.

When token and endpoint are known:

export OS_AUTH_TOKEN=XXX
export MONASCA_API_URL=http://192.168.10.4:8080/v2.0/

When using Keystone to obtain the token and endpoint:

export OS_USERNAME=
export OS_PASSWORD=
export OS_TENANT_NAME=
export OS_AUTH_URL=
export OS_REGION_NAME=

When using Vagrant Environment with middleware disabled:

export OS_AUTH_TOKEN=82510970543135
export OS_NO_CLIENT_AUTH=1
export MONASCA_API_URL=http://192.168.10.4:8080/v2.0/

The Monasca API will treat the auth token as the tenant ID when Keystone is not enabled.

You’ll find complete documentation on the shell by running monasca help:

usage: monasca [-j] [--version] [-d] [-v] [-k] [--cert-file CERT_FILE]
           [--key-file KEY_FILE] [--ca-file CA_FILE] [--timeout TIMEOUT]
           [--os-username OS_USERNAME] [--os-password OS_PASSWORD]
           [--os-tenant-id OS_TENANT_ID] [--os-tenant-name OS_TENANT_NAME]
           [--os-auth-url OS_AUTH_URL] [--os-region-name OS_REGION_NAME]
           [--os-auth-token OS_AUTH_TOKEN] [--os-no-client-auth]
           [--mon-api-url MONASCA_API_URL] [--mon-api-version MONASCA_API_VERSION]
           [--os-service-type OS_SERVICE_TYPE]
           [--os-endpoint-type OS_ENDPOINT_TYPE]
           <subcommand> ...

Command-line interface to the monasca-client API.

positional arguments:
  <subcommand>
    alarm-create         Create alarm.
    alarm-delete         Delete alarm.
    alarm-history        Alarm state history.
    alarm-history-list   List alarms state history.
    alarm-list           List alarms for this tenant.
    alarm-patch          Patch the alarm.
    alarm-show           Describe the alarm.
    alarm-update         Update the alarm.
    measurement-list     List measurements for the specified metric.
    metric-create        Create metric.
    metric-create-raw    Create metric from raw json body.
    metric-list          List metrics for this tenant.
    metric-statistics    List measurement statistics for the specified metric.
    notification-create  Create notification.
    notification-delete  Delete notification.
    notification-list    List notifications for this tenant.
    notification-show    Describe the notification.
    notification-update  Update notification.
    bash-completion      Prints all of the commands and options to stdout.
    help                 Display help about this program or one of its
                         subcommands.

optional arguments:
  -j, --json             output raw json response
  --version              Shows the client version and exits.
  -d, --debug            Defaults to env[MONASCA_DEBUG].
  -v, --verbose          Print more verbose output.
  -k, --insecure         Explicitly allow the client to perform "insecure" SSL
                         (https) requests. The server's certificate will not
                         be verified against any certificate authorities. This
                         option should be used with caution.
  --cert-file CERT_FILE  Path of certificate file to use in SSL connection.
                         This file can optionally be prepended with the
                         private key.
  --key-file KEY_FILE    Path of client key to use in SSL connection.This
                         option is not necessary if your key is prepended to
                         your cert file.
  --ca-file CA_FILE      Path of CA SSL certificate(s) used to verify the
                         remote server's certificate. Without this option the
                         client looks for the default system CA certificates.
  --timeout TIMEOUT      Number of seconds to wait for a response.
  --os-username OS_USERNAME
                         Defaults to env[OS_USERNAME].
  --os-password OS_PASSWORD
                         Defaults to env[OS_PASSWORD].
  --os-tenant-id OS_TENANT_ID
                         Defaults to env[OS_TENANT_ID].
  --os-tenant-name OS_TENANT_NAME
                         Defaults to env[OS_TENANT_NAME].
  --os-auth-url OS_AUTH_URL
                         Defaults to env[OS_AUTH_URL].
  --os-region-name OS_REGION_NAME
                         Defaults to env[OS_REGION_NAME].
  --os-auth-token OS_AUTH_TOKEN
                         Defaults to env[OS_AUTH_TOKEN].
  --os-no-client-auth    Do not contact keystone for a token. Defaults to
                         env[OS_NO_CLIENT_AUTH].
  --mon-api-url MONASCA_API_URL
                         Defaults to env[MONASCA_API_URL].
  --mon-api-version MONASCA_API_VERSION
                         Defaults to env[MONASCA_API_VERSION] or 2_0
  --os-service-type OS_SERVICE_TYPE
                         Defaults to env[OS_SERVICE_TYPE].
  --os-endpoint-type OS_ENDPOINT_TYPE
                         Defaults to env[OS_ENDPOINT_TYPE].

See "mon help COMMAND" for help on a specific command.

Bash Completion

Basic command tab completion can be enabled by sourcing the bash completion script.

source /usr/local/share/monasca.bash_completion

Metrics Examples

Note: this is not meant to be a complete list.

metric-create:

monasca metric-create cpu1 123.40
monasca metric-create metric1 1234.56 --dimensions instance_id=123,service=ourservice
monasca metric-create metric1 2222.22 --dimensions instance_id=123,service=ourservice
monasca metric-create metric1 3333.33 --dimensions instance_id=222,service=ourservice

metric-list:

monasca metric-list
+---------+--------------------+
| name    | dimensions         |
+---------+--------------------+
| cpu1    |                    |
| metric1 | instance_id:123    |
|         | service:ourservice |
+---------+--------------------+

measurement-list:

monasca measurement-list metric1 2014-01-01T00:00:00Z
+---------+--------------------+----------------+----------------------+--------------+
| name    | dimensions         | measurement_id | timestamp            | value        |
+---------+--------------------+----------------+----------------------+--------------+
| metric1 | instance_id:123    |     723885     | 2014-05-08T21:46:32Z |      1234.56 |
|         | service:ourservice |     725951     | 2014-05-08T21:48:50Z |      2222.22 |
| metric1 | instance_id:222    |     726837     | 2014-05-08T21:49:47Z |      3333.33 |
|         | service:ourservice |                |                      |              |
+---------+--------------------+----------------+----------------------+--------------+

monasca measurement-list metric1 2014-01-01T00:00:00Z --dimensions instance_id=123
+---------+--------------------+----------------+----------------------+--------------+
| name    | dimensions         | measurement_id | timestamp            | value        |
+---------+--------------------+----------------+----------------------+--------------+
| metric1 | instance_id:123    |     723885     | 2014-05-08T21:46:32Z |      1234.56 |
|         | service:ourservice |     725951     | 2014-05-08T21:48:50Z |      2222.22 |
+---------+--------------------+----------------+----------------------+--------------+

Notifications Examples

Note: this is not meant to be a complete list.

notification-create:

monasca notification-create cindyemail1 EMAIL cindy.employee@hp.com

notification-list:

monasca notification-list
+---------------+--------------------------------------+-------+----------------------+
| name          | id                                   | type  | address              |
+---------------+--------------------------------------+-------+----------------------+
| cindyemail1   | 5651406c-447d-40bd-b868-b2b3e6b59e32 | EMAIL |cindy.employee@hp.com |
+---------------+--------------------------------------+-------+----------------------+

Alarms Examples

Note: this is not meant to be a complete list.

alarm-create:

monasca alarm-create cpu1alarm 'cpu1>10'
monasca alarm-create cpu2alarm 'cpu1>99' --severity HIGH
monasca alarm-create test1alarm1 'avg(metric1{instance_id=123)>=10' --severity CRITICAL --description 'avg greater than thresh' --alarm-actions 5651406c-447d-40bd-b868-b2b3e6b59e32

alarm-list:

monasca alarm-list
+-------------+--------------------------------------+------------------------------------+--------------+-----------------+
| name        | id                                   | expression                         | state        | actions_enabled |
+-------------+--------------------------------------+------------------------------------+--------------+-----------------+
| cpu1alarm   | 67b9f4cc-3d57-4c6c-848c-555d0b3a8579 | cpu1>10                            | UNDETERMINED | True            |
| cpu2alarm   | 9e6b9fad-ef1b-4030-beab-10678bcc758a | cpu1>99                            | UNDETERMINED | True            |
| test1alarm1 | c81e1d40-2115-4557-96f4-eda6b8823fd6 | avg(metric1{instance_id=123}) >= 10| UNDETERMINED | True            |
+-------------+--------------------------------------+------------------------------------+--------------+-----------------+

alarm-show:

monasca alarm-show c81e1d40-2115-4557-96f4-eda6b8823fd6
+----------------------+----------------------------------------------------------------------------------------------------+
| Property             | Value                                                                                              |
+----------------------+----------------------------------------------------------------------------------------------------+
| actions_enabled      | true                                                                                               |
| alarm_actions        | [                                                                                                  |
|                      |   "5651406c-447d-40bd-b868-b2b3e6b59e32"                                                           |
|                      | ]                                                                                                  |
| description          | "avg greater than thresh"                                                                          |
| expression           | "avg(metric1{instance_id=123})>=10"                                                                |
| expression_data      | function: AVG                                                                                      |
|                      | metric_name: metric1                                                                               |
|                      | period: 60                                                                                         |
|                      | threshold: 10.0                                                                                    |
|                      | periods: 1                                                                                         |
|                      | operator: GTE                                                                                      |
|                      | dimensions: {                                                                                      |
|                      | instance_id: 123                                                                                   |
|                      | }                                                                                                  |
| id                   | "c81e1d40-2115-4557-96f4-eda6b8823fd6"                                                             |
| links                | href:http://192.168.10.4:8080/v2.0/alarms/c81e1d40-2115-4557-96f4-eda6b8823fd6,rel:self            |
|                      | href:http://192.168.10.4:8080/v2.0/alarms/c81e1d40-2115-4557-96f4-eda6b8823fd6/history,rel:history |
| name                 | "test1alarm1"                                                                                      |
| ok_actions           | []                                                                                                 |
| severity             | "CRITICAL"                                                                                         |
| state                | "UNDETERMINED"                                                                                     |
| undetermined_actions | []                                                                                                 |
+----------------------+----------------------------------------------------------------------------------------------------+

alarm-patch:

monasca alarm-patch c81e1d40-2115-4557-96f4-eda6b8823fd6 --state OK

Python API

There’s also a complete Python API.

In order to use the python api directly, you must first obtain an auth token and identify the monasca api endpoint.

The api_version matches the version of the Monasca API. Currently it is ‘v2_0’.

When calling the commands, refer to monascaclient.v2_0.shell.py ‘do_<command>’ to see the required and optional fields for each command.

Refer to this example in python-monascaclient/client_api_example.py:

from monascaclient import client
import monascaclient.exc as exc
import time

api_version = '2_0'
endpoint = 'http://192.168.10.4:8080/v2.0'
kwargs = {
    'token': '12345678'
}

# construct the mon client
monasca_client = client.Client(api_version, endpoint, **kwargs)

# call the metric-create command
dimensions = {'instance_id': '12345', 'service': 'hello'}
fields = {}
fields['name'] = 'cindy1'
fields['dimensions'] = dimensions
fields['timestamp'] = time.time()
fields['value'] = 222.333
try:
    resp = monasca_client.metrics.create(**fields)
except exc.HTTPException as he:
    print(he.code)
    print(he.message)
else:
    print(resp)

License

Copyright (c) 2014 Hewlett-Packard Development Company, L.P.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

 
File Type Py Version Uploaded on Size
python-monascaclient-1.0.1.tar.gz (md5) Source 2014-07-30 56KB
python_monascaclient-1.0.1-py2.py3-none-any.whl (md5) Python Wheel py2.py3 2014-07-30 61KB
  • Downloads (All Versions):
  • 273 downloads in the last day
  • 1142 downloads in the last week
  • 8080 downloads in the last month