skip to navigation
skip to content

Not Logged In

roscraco 0.3.2

A library for managing home routers (networking equipment).

roscraco (short for ROuter SCRAping and COntrol) is a library for managing networking devices (routers).

The targeted (and currently supported) devices are home routers.

Settings are fetched and pushed from/to devices by using their standard web-management interface (HTTP).

The type of device being managed is abstracted away and is only important initially (when the controller object is created). From the developer's standpoint, settings are then managed the same way regardless of the device's type.

Installing

roscraco is available on PyPI and can be installed using pip or easy_install:

pip install roscraco

or:

easy_install roscraco

Supported devices

The library supports the following devices:

  • TP-Link
    • WR340G (until v3)
    • WR340Gv4
    • WR720N
    • WR740N
    • WR741N
    • WR940N
    • WR941N
  • Netgear
    • WGR614v7
    • WGR614v8
    • WGR614v9
  • Canyon
    • CNWF514
    • CNPWF514N1
    • CNPWF518N3
  • Zyxel
    • P320W
    • P330W
  • Tenda
    • W268R
  • Tomato (routers using Tomato firmware)
    • version 1.23

Supported features

  • Fetching router information (MAC address, uptime, DNS servers, traffic statistics, connected clients)
  • Fetching DHCP server settings
  • Fetching and updating DMZ settings
  • Fetching and updating DHCP address reservation settings
  • Fetching and updating Wireless connectivity settings
  • Rebooting

Some of the (usually more advanced) options of a given settings object cannot be controlled. For most of these options a "sane" value (usually default) is picked and will potentially overwrite any custom values that are currently set.

Usage example

Creating a controller instance:

import roscraco
controller = roscraco.create_controller(
    roscraco.ROUTER_TP_LINK, 'WR340G',
    'localhost', 8080, 'username', 'password'
)

Print a lot of information about the device:

roscraco.helper.print_info(controller)

Change some Wireless settings:

# Fetch the current wireless settings
settings = controller.get_wireless_settings()

# Switch to the next transmission channel
settings.set_channel(settings.channel + 1)

# Disable password authentication
settings.set_security_type(settings.SECURITY_TYPE_NONE)

# Change the SSID (network name)
settings.set_ssid('NewNetworkName')

# Send the new wireless settings to the router
controller.push_wireless_settings(settings)

Be nice and log out of the device properly (you can also use contextlib.closing):

controller.close()
 
File Type Py Version Uploaded on Size
roscraco-0.3.2.tar.gz (md5) Source 2012-10-22 43KB
  • Downloads (All Versions):
  • 24 downloads in the last day
  • 197 downloads in the last week
  • 812 downloads in the last month