A poor synthesizer
Project description
pebsaq is a poor synthesizer.
License
pebsaq is free software under the terms of the GNU General Public License version 3 (or any later version). The author of pebsaq is Niels Serup, contactable at ns@metanohi.name. This is version 0.1.0 of the program.
Installing
Way #1
Just run this (requires that you have python-setuptools installed):
$ sudo easy_install pebsaq
Way #2
Get the newest version of pebsaq at http://metanohi.name/projects/pebsaq/ or at http://pypi.python.org/pypi/pebsaq
Extract the downloaded file and run this in a terminal:
# python setup.py install
Dependencies
Python 2.4+ is probably a requirement. In any case, it does not work with Python 3.
- pyalsaaudio
Web address: http://pyalsaaudio.sourceforge.net/
License: Python Software License
Installing:
In general: $ sudo easy_install pyalsaaudio (requires libasound2-dev and python-dev)
On DEB-based distributions: $ sudo apt-get install python-alsaaudio
On RPM-based distributions: $ sudo yum install python-alsaaudio
On other distributions: probably something similar
Author: Casper Wilstrup <cwi at aves dk>
- pygame
Web address: http://www.pygame.org/
License: GNU Lesser General Public License
Installing:
In general: $ sudo easy_install pygame
On DEB-based distributions: $ sudo apt-get install python-pygame
On RPM-based distributions: $ sudo yum install pygame
On other distributions: probably something similar
- qvikconfig
Web address: http://pypi.python.org/pypi/qvikconfig/
License: GPLv3+
Installing: $ sudo easy_install qvikconfig
Author: Niels G. W. Serup
Note that qvikconfig is included with pebsaq, so you don’t really have to install it.
Optional extras
If present, pebsaq will also use these Python modules:
- termcolor
Web address: http://pypi.python.org/pypi/termcolor/
License: GPLv3+
Installing: $ sudo easy_install termcolor
Author: Konstantin Lepa <konstantin lepa at gmail com>
Note that termcolor is included with pebsaq, so you don’t really have to install it.
- setproctitle
Web address: http://pypi.python.org/pypi/setproctitle/
License: New BSD License
Installing: $ sudo easy_install setproctitle
Author: Daniele Varrazzo <daniele varrazzo at gmail com>
Using
Running pebsaq with no arguments will start the utility in interactive mode. In interactive mode you can interactively change the frequency and the strengths of the waves. A nice wave will also be drawn to the screen.
Running pebsaq --help will show a list of available command-line options. These options can also be specified in config files. Config files use a property = value syntax (e.g. frequency = 367 or square strength = 2) separated by newlines.
Press 3 to decrease the frequency by 10Hz. Press 6 to increase the frequency by 10Hz. Press down arrow key to decrease the amplitude by 0.1. Press down arrow key to increase the amplitude by 0.1. Press 1 to decrease the sine strength by 1. Press 2 to increase the sine strength by 1. Press 4 to decrease the square strength by 1. Press 5 to increase the square strength by 1. Press 7 to decrease the triangle strength by 1. Press 8 to increase the triangle strength by 1. Press 0 to mute pebsaq. Press ESC to exit pebsaq.
This document
Copyright (C) 2010, 2012 Niels G. W. Serup
Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. This file is offered as-is, without any warranty.