Skip to main content

OpenID plugin for Trac

Project description

OpenID Authentication Plugin

Description

This plugin allows to login to Trac using OpenID. I use it with Trac 0.12. It was developed under Trac 0.11, so it should work there too. Version 0.4 of this plugin runs under trac 1.0 (formerly 0.13), but this configuration has not yet been extensively tested or used in production.

Download & Source

The source repository is on github. You may submit bug reports and pull requests there.

There are several ways to install this plugin.

  1. You can install directly from PyPI using easy_install or pip:

    easy_install TracAuthOpenId

    or:

    pip install TracAuthOpenId
  1. There is a Debian package for this plugin:

    sudo aptitude install trac-authopenid
  1. Patrick Uiterwijk has packaged this plugin for Fedora:

    yum install trac-authopenid-plugin

    Should you have questions regarding the Fedora packaging, please file them in the Fedora bug tracker.

  1. You can clone git repository somewhere in your system:

    cd /your/3rdparty/src
    git clone git://github.com/dairiki/authopenid-plugin.git

    Then you should do following steps:

    cd authopenid-plugin
    python setup.py install

    Alternatively, if you use pip, you can install directly from the git repository:

    pip install git+git://github.com/dairiki/authopenid-plugin.git

For any of the above methods, if you want to do a system-wide installation, you will have to do this with root permissions (e.g. using su or sudo).

How to enable

[components]
trac.web.auth.* = disabled
authopenid.* = enabled

You don’t need to disable default authentication mechanism (trac.web.auth.*) if you are using it. OpenID plugin does not conflict with default authentication mechanism.

Options

This plugin has number of configuration options. Here is an excerpt from an example config file which lists all available options:

[openid]

################################################################
# Provider selection

# Single sign-on support
#
# If you want to support only a single OpenID provider and that
# provider allows the users to select his account as part of its
# authentication process, set default_openid to the OP identifier
# of the provider.  Then clicking the _OpenID Login_ link will take
# the user directly to the providers authentication interface,
# bypassing the openid provider/identity selection dialog.
#
# E.g. to use google as your sole openid provider, use
#default_openid = https://www.google.com/accounts/o8/id

# (If you have set default_openid, the identity selection dialog is
# not displayed, and the rest of the options in this section are moot.)

# Explicit set of provider names to display.  Should be set to a comman
# separated list of provider names.  Choices include:
# google, yahoo, aol, openid, myopenid, livejournal, flickr, technorati,
# wordpress, blogger, verisign, vidoop, claimid, as well as any
# custom provider you may have configured (via custom_provider_name).
# By default all known providers are listed.
#providers = google, myopenid

# Add a custom openid provider to the form
# provider name
#custom_provider_name = myprovider
# label
#custom_provider_label = Enter your username
# identity template
#custom_provider_url = http://myprovider.example.net/{username}
# URL to image/icon
#custom_provider_image = /static/icons/myprovider.png
# image size (small or large)
#custom_provider_size = small

# What is OpenID link.
whatis_link = http://openid.net/what/
# Sign-up link
signup_link = http://openid.net/get

################################################################
# Authorization

# Identity white and black lists
#
# IMPORTANT: strip_protocol and strip_trailing_slash (see below) affectswhat
# openid will be given to white_list or black_list

# white_list: If set, only identities matching this list will be accepted
# E.g. to allow only google and myopenid provided identities, use
#white_list = https://www.google.com/accounts/o8/id?id=*, http://*.myopenid.com/

# black_list: If set, matching identities will not be accepted
#black_list = http://spammer.myopenid.com/

# Comma separated list of allowed users, using the email address
# resolved via SREG or AX. Use in combination with trusted
# identity patterns in white_list.
#email_white_list = joe@example.com

# In addition to white and black lists you can use external web
# service for allowing users into trac. To control that you must
# use check_list and check_list_key option. It will generate URL:
#
#     <check_list>?<check_list_key>=openid&email=email
#
# email will be attached only if available.
#
# It expects JSON result in following format:
#
#     {"<check_list_key>": true}
#
# Your check_list web app may also be used to map openid
# identifiers to your own internal authnames (usernames). (See
# check_list_username below.)
#
# IMPORTANT: strip_protocol and strip_trailing_slash affects what
# openid will be send to service
#
# You can use this option to map your OpenIDs to internal username.
#check_list = http://your.site.com/openidallow

# The parameter name used both for passing the claimed identity
# to the authorization app, as well as for returning the authorization
# status.  Defaults to "check_list".
#check_list_key = check_list

# Expiration time acts as timeout. E.g. if expiration time is 24
# hour and you login again in those 24 hours. Expiration time is
# extended for another 24 hours. (Default: false)
timeout = false

################################################################
# OpenID protocol and extensions

# Require sreg data
sreg_required = false

# Default PAPE method to request from OpenID provider.
# pape_method =

# In some cases you might want allow users to login to different
# projects using different OpenIDs. In that case don't use
# absolute trust root.
absolute_trust_root = false


# Use the OpenIDTeams extension to request user's group membership.
# If a user is a member of any of the teams listed in this option,
# the user will be added to the trac permission group(s) of the same
# name.  (Set to to a comma-separated list.)
#
# NOTE: To use this option, the python-openid-teams package must be
# installed.
groups_to_request =

################################################################
# Authname (trac SID) generation

# Force authname to lowercase (default true)
#lowercase_authname = true

# Use SREG nickname as authname (default false)
#use_nickname_as_authname = false

# If you want username to be written as
# "username_in_remote_system <openid_url>" use:
#combined_username = true

# Remove http:// or https:// from URL that is used as
# username. (Default: false)
strip_protocol = false

# Remove trailing slash from URL that is user as username (Defaul: false)
strip_trailing_slash = false

# If you have an external authorization web app configured (via
# check_list), you may also use that to map openid identifiers to
# local usernames (authnames).   Set check_list_username to the name
# of a parameter which will be used to return the authname.
# E.g. if check_list_username=username, the expected JSON result from
# the authorization service is
#
#     {"check_list": true, "username": "Peter"}
#
#check_list_username=

# Normally, the authname is not trusted to uniquely identify the user.
# (What if another user has already registered with the same username?)
# By default, a small integer is appended to the authname to make it
# unique.  To default this, you may set trust_authname to true.
#
# WARNING: Setting this can is many circumstances make identity theft
# very easy.  Only set this if you understand what you are doing.
#trust_authname = false


# Authentication cookie controls.
#
# Note that these are in the [trac] config section.

[trac]

# Check user IP address. IP addresses are masked because
# in some cases user is behind internal proxy and last
# number in IP address might vary.
# (Does not currently support IPv6.)
check_auth_ip = true
check_auth_ip_mask = 255.255.255.0

# number of seconds until cookie will expire
auth_cookie_lifetime = 86400

Authors

This plugin was written by Dalius Dobravolskas. It is currently being maintained by Jeff Dairiki. Other contributors include: Patrick Uiterwijk.

Changes

Version 0.4.6 (2013-06-27)

Bug Fixes

  • Avoid AttributeError when neither name nor email is returned from the OP. (Fixes #9.)

Version 0.4.5 (2013-06-23)

(Another) brown bag release. I botched release 0.4.4, and managed to totally delete the PyPI repository in the process. (Sorry.)

Version 0.4.4 (2013-06-23)

New Features

  • (Contributed by Patrick Uiterwijk) Users can be added to trac groups according to group membership provided via the OpenIDTeams extension. Only groups listed in the new groups_to_request config option will be considered for possible membership. To use this feature you must install the python-openid-teams package.

Bug/Security Fixes

  • Previously, if no email address was returned via AX or SREG, the email_white_list config option was being ignored. Now if email_white_list is set and no email address can be determined, authorization will be denied.

  • Do not create new users with a username which already has trac permissions assigned to it. (E.g. this might be the name of a trac group.)

Documentation

  • Updated the example config in the README so that it more closely matches current reality. (Baby steps…)

Version 0.4.3 (2013-05-22)

Bug Fixes

  • Fix so that check_list_username actually works. Now one can actually use the check_list web API to implement custom identity to username mapping.

  • Fall back to using the identifier URL as the authname (rather than throwing an exception) if the OpenID provider did not return a full name (or nickname).

Packaging

  • README.rst: Patrick Uiterwijk has packaged this plugin for Fedora

Version 0.4.2 (2013-03-24)

New Features

These features were contributed by Patrick Uiterwijk.

  • New config option use_nickname_as_authname. If set, the OpenID nickname will be used for the authname (or trac username).

  • New config option trust_authname. If set, trust the OpenID-derived authname to be unique. Security warning: do not set this unless you know what you are doing.

Version 0.4.1 (2012-06-25)

This is a brown bag release. Release 0.4 was unusable.

Bug Fixes

  • Packaging: A number of crucial files were omitted from the manifest.

Version 0.4 (2012-06-25)

Configuration Changes

  • The default for [trac] check_auth_ip is now False. This has security implications. If you want authorization to be tied to the clients IP address you must now explicitly set this option to True.

    Prior to this change, if check_auth_ip was not explicitly set, we ignored the global trac default (False) for the setting and behaved as if it were set to True.

    This change is being made for the sake of backwards compatibility with trac 0.11 whose Configuration.has_option method does not support the optional defaults argument added in 0.12. Without that there seems to be no clean way to determine whether a setting is explicitly set in the .ini file.

New Features

  • We will now use the json package if your python version includes it (python >= 2.6). For older pythons, the simplejson package is now required.

  • A minor hack has been made which allows at least basic functionality under the development branch, trac-1.0 (formerly know as trac-0.13). Note that only very basic tests under trac-1.0 have not been performed. (The code in this plugin still does not adhere to the modern trac db API usage recommendations.)

Version 0.3.6 (2012-03-05)

New Maintainer

Jeff Dairiki has taken over maintenance of this plugin from the original author, Dalius Dobravolskas (who no longer uses trac.)

The source repository for the plugin has moved to https://github.com/dairiki/authopenid-plugin.

New Features

  • Respect the [trac] auth_cookie_lifetime config value when setting cookie expiration times.

Deprecations

  • Using the [trac] expires setting to specify the auth cookie lifetime is deprecated. Use [trac] auth_cookie_lifetime instead. (The expires setting does not seem to exist in trac 0.12 or 0.11.)

Bug Fixes

  • Don’t override the default value for the [trac] check_auth_ip configuration setting. Trac declares this to have a default value of false; we were overriding that default to true.

Version 0.3.5 (2011-10-04)

New Features

  • Now AX (as well as SREG) are attempted to get the user’s name. This is tested with Google (which does not support SREG).

  • The new config setting [openid] lowercase_authname specifies whether to force authnames to lowercase. For backwards compatibility, the default for this option is true (see below). In general, however, I think it makes more sense to set this option to false.

Bug Fixes

  • Authnames were being lower-cased when recovering them from the cookie, but not when generating them initially. This resulted — unless the user’s name was all lower case to start with — in two sessions being created upon initial login, one of which was ignored thereafter.

  • Always uniquify authnames. When they are lowercased, there’s always a chance of collision, even when they include the identity URL.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

TracAuthOpenId-0.4.6.tar.gz (41.7 kB view hashes)

Uploaded Source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page