Skip to main content

A cloud-enabled distributed resource manager

Project description

# Cloud Scheduler 1.2 README

## Introduction Cloud Scheduler: Automatically boot VMs for your HTC jobs

Cloud Scheduler manages virtual machines on clouds configured with Nimbus, Eucalyptus, or Amazon EC2 to create an environment for HTC batch job execution. Users submit their jobs to a Condor job queue, and Cloud Scheduler boots VMs to suit those jobs.

For more documentation on Cloud Scheduler, please refer to:

## Prerequisites

## Optional Prerequisites

## Basic Steps to get Jobs Running via Cloud Scheduler

  1. Install Prerequiste libraries

  2. Install Cloud Scheduler & Condor

  3. Configure Condor and Cloud Scheduler

  4. Setup a VM Image with Condor installed & CS Condor Scripts

  5. Add the Required CS Attributes to a job submission file

  6. Start CS and Submit job(s)

### Quick Start for People Who Think They Know What They’re Doing

# pip install cloud-scheduler

### Special help for RHEL 5

Since Cloud Scheduler requires Python 2.6+, and we recognize that RHEL 5 comes with and requires Python 2.4, here’s a quick guide to getting Python 2.7 installed on those systems:

Install the tools we need to build Python and its modules:

# yum install gcc gdbm-devel readline-devel ncurses-devel zlib-devel

bzip2-devel sqlite-devel db4-devel openssl-devel tk-devel bluez-libs-devel libxslt libxslt-devel libxml2-devel libxml2

Download and compile Python 2.7.1:

$ VERSION=2.7.1 $ mkdir /tmp/src $ cd /tmp/src/ $ wget http://python.org/ftp/python/$VERSION/Python-$VERSION.tar.bz2 $ tar xjf Python-$VERSION.tar.bz2 $ rm Python-$VERSION.tar.bz2 $ cd Python-$VERSION $ ./configure $ make $ sudo make altinstall

Now we need to install Python setuputils:

$ cd /tmp/src $ wget http://pypi.python.org/packages/2.7/s/setuptools/setuptools-0.6c11-py2.7.egg $ sudo sh setuptools-0.6c11-py2.7.egg

Now install pip to install the rest of our dependencies:

$ sudo easy_install-2.7 pip

And the rest of our dependencies:

$ sudo pip-2.7 install cloud-scheduler

Now clean everything up:

$ sudo rm -Rf /tmp/src/

Finally, once you’ve set up the rest of Cloud Scheduler, you’ll want to set your Python version in the Cloud Scheduler init script, or use virtualenv. Do this by changing the PYTHON variable to /opt/bin/python

### Other distros:

You can install the Python libraries listed above with pip:

lxml requires libxml2 and libxslt and their development libs to be installed.

Install pip:

# easy_install pip

And Cloud Scheduler and its dependencies:

# pip install cloud-scheduler

## Install without pip To install without using pip, run:

# python setup.py install

## Condor Install Cloud Scheduler works with [Condor](http://www.cs.wisc.edu/condor/), which needs to be installed and able to manage resources. You can install it on the same machine that runs Cloud Scheduler (or not). You need to enable SOAP to allow Cloud Scheduler to communicate with Condor. You can do this by adding the following to your Condor config file, which is usually located at: /etc/condor/condor_config:

## CLOUD SCHEDULER SETTINGS ENABLE_SOAP = TRUE ENABLE_WEB_SERVER = TRUE WEB_ROOT_DIR=$(RELEASE_DIR)/web ALLOW_SOAP=localhost, 127.0.0.1 SCHEDD_ARGS = -p 8080

We also recommend the following settings, especially if you’re planning on using Condor CCB:

UPDATE_COLLECTOR_WITH_TCP=True COLLECTOR_SOCKET_CACHE_SIZE=10000 COLLECTOR.MAX_FILE_DESCRIPTORS = 10000

We have also placed an example Condor config in scripts/condor/manager

Make sure you can run condor_status and condor_q, and make sure your ALLOW_WRITE will permit the VMs you will start to add themselves to your Condor Pool.

## Preparing VM Images

The VM images you would like to run jobs with need to be prepared to join your Condor pool. Cloud Scheduler will do most of the heavy lifting for you, but at the very least, you need to install Condor, and configure it as a worker that will join your Condor pool. The easiest way to do this is use the example configuration (at least as inspiration) from scripts/condor/worker/ . You’ll want to put these in your /etc/condor directory. You will probably also want to use our custom Condor init script. This does things like set up an appropriate environment for when Condor is started with private networking only, when started on EC2, and also will automatically point your node to your Condor Pool. When using the custom init script and doing offline testing of the VM image, ensure you place the central_manager file from scripts/condor/worker into /etc/condor as the init script will read the value of the CONDOR_HOST from this file.

## Installing Nimbus Cloud Client

The Nimbus Cloud Client is the standard client used to connect to Nimbus clouds. Cloud Scheduler uses this client to communicate with Nimbus.

We assume you want to install Cloud Client to /opt.

$ wget http://www.nimbusproject.org/downloads/nimbus-cloud-client-017.tar.gz $ tar xzf nimbus-cloud-client-017.tar.gz

Normally, the workspace reference client, workspace.sh, isn’t executable. The way Cloud Scheduler uses it makes this neccessary.

$ chmod +x nimbus-cloud-client-017/lib/workspace.sh

You’ll need to point your Cloud Scheduler install to this client. Set the workspace_path option to point there.

Be sure that you have a valid x509 proxy available before starting Cloud Scheduler. You can create one with:

$ nimbus-cloud-client-017/bin/grid-proxy-init.sh

## Configuration

### cloud_scheduler.conf

The Cloud Scheduler configuration file allows you to configure most of its functionality, and you’ll need to open it up to get a usable installation. All of its options are described inline in the example configuration file cloud_scheduler.conf, which is included with Cloud Scheduler.

By default, the Cloud Scheduler setup script installs its configuration files to /etc/cloudscheduler/, but you can manually select a different configuration by running cloud_scheduler with the -f option. If you’re running as a non-root user, Cloud Scheduler will also check for config files in ~/.cloud_scheduler/

Cloud Scheduler checks for config files in the following order, and will use the first one it finds:

[config specified with the -f option] ~/.cloudscheduler/cloud_scheduler.conf /etc/cloudscheduler/cloud_scheduler.conf

### cloud_resources.conf

The cloud resource configuration file, cloud_resources.conf, is where you define which clouds Cloud Scheduler should use for starting VMs. You’ll specify how many VMs you want to boot on each cloud, and what it’s capabilities are. The best way to get familiar with this file is to open up the sample cloud_resources.conf file, where all of its configuration options, and a sample configuration are included.

Like cloud_scheduler.conf, the Cloud Scheduler setup script installs this file in /etc/cloudscheduler/, but you can manually select a different configuration by running cloud_scheduler with the -c option. You can also specify the location of this file with the cloud_resource_config option in the cloud_scheduler.conf file.

## Init Script There is a cloud scheduler init script at scripts/cloud_scheduler. To install it on systems with System V style init scripts, you can do so with:

# cp scripts/cloud_scheduler /etc/init.d/

Start it with:

# /etc/init.d/cloud_scheduler start

On Red Hat-like systems you can enable it to run at boot with:

# chkconfig cloud_scheduler on

NOTE: If you’ve used a non-default Python, you may need to set the PYTHON variable in the init script. If you’ve installed in a non-default location, you may need to set your EXECUTABLEPATH variable.

To Stop Cloud Scheduler without it shutting down VMs (Current VMs will be saved to the persistence file specified in the cloud_scheduler.conf and get reloaded when Cloud Scheduler is started - Note that loading the VMs from persistence may take awhile)

# /etc/init.d/cloud_scheduler forcekill

To Reload the cloud_resources.conf without restarting Cloud Scheduler

# /etc/init.d/cloud_scheduler reconfig

## Configuring a VM for EC2 / Eucalyptus

The way Cloud Scheduler manipulates Condor to connect to the correct central manager is by writing files which are read by the Condor init script to configure itself. Nimbus supports this out of the box, but EC2 requires a helper script to accomplish this. This section explains how to install it.

Install the EC2 Context Helper script to your machine. This is a part of the Cloud Scheduler release tarball, and is in the scripts/ec2contexthelper/ directory.

# /etc/init.d/cloud_scheduler start # cd scripts/ec2contexthelper/ # python setup.py install # which contexthelper # /usr/bin/contexthelper # chkconfig context on

## Job Submission

Submitting a job for use with Cloud Scheduler is very similar to submitting a job for use with a regular Condor Scheduler. It would be helpful to read through Chapter 2 of the Condor Manual for help on submitting jobs to Condor.

Jobs meant to be run by VMs started by Cloud Scheduler need a few extra parameters to work properly. These are: (Required parameters are highlighted)

  • Requirements = VMType =?= “your.vm.type” : The type of VM that the job must run on. This is a custom attribute of the VM advertised to the Condor central manager. It should be specified on the VM’s condor_config or condor_config.local file.

  • VMLoc or VMAMI : The URL (for Nimbus) or AMI (for EC2-like clusters) of the image required for the job to run

  • VMCPUArch : The CPU architecture that the job requires. x86 or x86_64. Defaults to x86.

  • VMCPUCores : The number of CPU cores for the VM. Defaults to 1.

  • VMStorage : The amount of scratch storage space the job requires. (Currently ignored on EC2-like Clusters)

  • VMMem : The amount of RAM that the VM requires.

  • VMNetwork : The type of networking required for your VM. Only used with Nimbus. Corresponds to Nimbus’s network pool.

  • VMInstanceType : The EC2 instance type of the VM requested. Only used with EC2 clouds like Amazon.

  • VMMaximumPrice : The maximum price in cents per hour for a VM (EC2 Only)

  • VMKeepAlive : Number of minutes a VM should stay up after job finishes

  • VMHighPriority : 1 (Optional flag) Indicates a high priority job to Cloud Scheduler – high priority job support can be enabled in the cloud_scheduler.conf

  • TargetClouds : A comma separated list of names of clouds that you would like your job to use

  • CSMyProxyServer : The hostname of the myproxy server you’d like to use for credential renewal

  • CSMyProxyCredsName : The name of your myproxy credentials

  • VMJobPerCore : bool – Assigns multiple slots to a multi-core VM

### A Sample Job

# Regular Condor Attributes Universe = vanilla Executable = script.sh Arguments = one two three Log = script.log Output = script.out Error = script.error should_transfer_files = YES when_to_transfer_output = ON_EXIT # # Cloud Scheduler Attributes Requirements = VMType =?= “vm.for.script” +VMLoc = “http://repository.tld/your.vm.img.gz” +VMAMI = “ami-dfasfds” +VMCPUArch = “x86” +VMCPUCores = “1” +VMNetwork = “private” +VMMem = “512” +VMStorage = “20” Queue

## Using Proxy Certificates

For a more secure, but more complicated setup allowing your users to use their own proxy certificates, there is a guide on the heprc wiki:

https://wiki.heprc.uvic.ca/twiki/bin/view/Main/CsGsiSupport

## License

This program is free software; you can redistribute it and/or modify it under the terms of either:

a) the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version, or

  1. the Apache v2 License.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See either the GNU General Public License or the Apache v2 License for more details.

You should have received a copy of the Apache v2 License with this software, in the file named “LICENSE”.

You should also have received a copy of the GNU General Public License along with this program in the file named “COPYING”. If not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA or visit their web page on the internet at http://www.gnu.org/copyleft/gpl.html.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

cloud-scheduler-1.2.tar.gz (205.2 kB view hashes)

Uploaded Source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page