Skip to main content

Lab Equipment Automation Package

Project description

Control.lab.ly

Lab Equipment Automation Package

Description

User-friendly package that enables flexible automation an reconfigurable setups for high-throughput experimentation and machine learning.

Package Structure

  1. Analyse
  2. Compound
  3. Control
  4. Make
  5. Measure
  6. Move
  7. Transfer
  8. View

Device support

  • Make
    • Multi-channel LED array [Arduino]
    • Multi-channel spin-coater [Arduino]
    • Peltier device [Arduino]
  • Measure
    • (Keithley) 2450 Source Measure Unit (SMU) Instrument
    • (PiezoRobotics) Dynamic Mechanical Analyser (DMA)
    • Precision mass balance [Arduino]
  • Move
    • (Creality) Ender-3
    • (Dobot) M1 Pro
    • (Dobot) MG400
    • Primitiv [Arduino]
  • Transfer
    • (Dobot) Gripper attachments
    • (Sartorius) rLINE® dispensing modules
    • (TriContinent) C Series syringe pumps
    • Peristaltic pump and syringe system [Arduino]
  • View
    • (FLIR) AX8 thermal imaging camera - full functionality in development
    • Web cameras [General]

Installation

Control.lab.ly can be found on PyPI and can be installed easily with pip install.

$ pip install control-lab-ly

Basic Usage

Simple start-up guide for basic usage of the package.

Import desired class

from controllably.Move.Cartesian import Ender
mover = Ender(...)
mover.safeMoveTo((x,y,z))

More details for each class / module / package can be explored by using the help function.

help(controllably.Move)   # help on package
help(Ender)               # help on class
help(mover)               # help on instance/object

Alternatively, you can use the native pydoc documentation generator.

$ python -m pydoc controllably.Move

Tip: when using Interactive Python (IPython) (e.g. Jupyter notebooks), add a exclamation mark (!) in front of the shell command

>>> !python -m pydoc controllably.Move
>>> !python -m pydoc -b                 # Generates a static HTML site to browse package documentation

For basic usage, this is all you need to know. Check the documentation for more details on each respective class.


Advanced Usage

For more advanced uses, Control.lab.ly provides a host of tools to streamline the development of lab equipment automation.

0. Import package

The convention is to import Control-lab-ly as lab.

import controllably as lab

Contents

  1. Projects
  2. Setups
  3. Decks
  4. Safety measures
  5. Plugins

1. Creating a new project

Create a /configs folder in the base folder of your project repository to store all configuration related files from which the package will read from.
This only has to be done once when you first set up the project folder.

lab.create_configs()

A different address may be used by different machines for the same device. To manage the different addresses used by different machines, you first need your machine's unique identifier.

# Get your machine's ID
print(lab.Helper.get_node())

A template of registry.yaml has also been added to the folder to hold the machine-specific addresses of your connected devices (i.e. COM ports).
Populate the YAML file in the format shown below.

### registry.yaml ###
'012345678901234':              # insert your machine's 15-digit ID here (from the above step)
    cam_index:                  # camera index of the connected imaging devices
      __cam_01__: 1             # keep the leading and trailing double underscores
      __cam_02__: 0
    port:                       # addresses of serial COM ports
      __device_01__: COM3       # keep the leading and trailing double underscores
      __device_02__: COM16

To find the COM port address(es) of the device(s) that is/are currently connected to your machine, use:

lab.Helper.get_ports()

2. Creating a new setup

Create a new folder for the configuration files of your new setup. If you had skipped the previous step of creating a project, calling lab.create_setup() will also generate the required file structure. However, be sure to populate your machine ID and device addresses in the registry.yaml file.

lab.create_setup(setup_name = "_Setup01_")
# replace "_Setup01_" with the desired name for your setup

This creates a /_Setup01_ folder that holds the configuration files for the setup, which includes config.yaml and layout.json.

2.1 config.yaml

Configuration and calibration values for your devices is stored in config.yaml.
Each configuration starts with the name of your device, then its module, class, and settings.

_Device01_:                                     # name of simple device (user-defined)
  module: _module_name_01_                      # device module
  class: _submodule_1A_._class_1A_              # device class
  settings:
    port: __device_01__                         # port addresses defined in registry.yaml
    _setting_A_: {'tuple': [300,0,200]}         # use keys to define the type of iterable
    _setting_B_: {'array': [[0,1,0],[-1,0,0]]}  # only tuple and np.array supported

Compound devices are similarly configured. The configuration values for its component devices are defined under the component_config setting. The structure of the configuration values for the component devices are similar to that shown above, except indented to fall under the indentation of the component_config setting.

_Device02_:                                     # name of 'Compound' device (user-defined)
  module: Compound                            
  class: _submodule_2A_._class_2A_
  settings:
    _setting_C_: 1                              # other settings for your 'Compound' device
    component_config:                           # nest component configuration settings here
      _Component01_:                            # name of component
        module: _module_name_03_
        class: _submodule_3A_._class_3A_
        settings:
          ip_address: '192.0.0.1'               # IP addresses do not vary between machines
      _Component02_: 
        module: _module_name_04_
        class: _submodule_4A_._class_4A_
        settings:
          _setting_D_: 2                        # settings for your component device

Lastly, you can define shortcuts to quickly access components of Compound devices.

SHORTCUTS:
  _Nickname1_: '_Device02_._Component01_'
  _Nickname2_: '_Device02_._Component02_'

2.2 layout.json

Layout configuration of your physical workspace (Deck) will be stored in layout.json. This package uses the same Labware files as those provided by Opentrons, which can be found here, and custom Labware files can be created here. Labware files are JSON files that specifies the external and internal dimensions of a Labware block/object.

Optional: if your setup does not involve moving objects around in a pre-defined workspace, a layout configuration may not be required.

{
  "reference_points":{
    "1": ["_x01_","_y01_","_z01_"],
    "2": ["_x02_","_y02_","_z02_"]
  },
  "slots":{
    "1": {
      "name": "_Labware01_",
      "exclusion_height": -1,
      "filepath": "_repo_/.../_Labware01_.json"
    },
    "2": {
      "name": "_Labware02_",
      "exclusion_height": 0,
      "filepath": "_repo_/.../_Labware02_.json"
    },
    "3": {
      "name": "_Labware03_",
      "exclusion_height": 10,
      "filepath": "_repo_/.../_Labware03_.json"
    }
  }
}

In reference_points, the bottom-left coordinates of each slot in the workspace are defined. Slots are positions where Labware blocks may be placed.

In slots, the name of each slot and the file reference for Labware block that occupies that slot are defined. The filepath starts with the repository's base folder name.

The exclusion_height is the height (in mm) above the dimensions of the Labware block to steer clear from when performing move actions. Defaults to -1 (i.e. do not avoid).
(Note: only applies to final coordinates (i.e. destination). Does not guarantee collision avoidance when using point-to-point move actions. Use safeMoveTo() instead.)

2.3 Load setup

The initialisation of the setup occurs during the import setup from within configs/_Setup01_.

# Add repository folder to sys.path
from pathlib import Path
import sys
REPO = '_repo_' 
# replace "_repo_" with your base directory for the project
ROOT = str(Path().absolute()).split(REPO)[0]
sys.path.append(f'{ROOT}{REPO}')

# Import the initialised setup
from configs._Setup01_ import setup
this = setup
this._Device01_
this._Nickname2_

With this, you can access all the devices that you have defined in configs.yaml.

3. Managing a deck

Optional: if your setup does not involve moving objects around in a pre-defined workspace, a Deck may not be required.

3.1 Loading a deck

To load the Deck from the layout file, use the loadDeck() function.

from configs._Setup01_ import LAYOUT_FILE
this._Device02_.loadDeck(LAYOUT_FILE)
deck = this._Device02.deck

3.2 Loading a Labware

To load the Labware into the Deck, use the load_labware() method.

deck.load_labware(...)

4. Setting up safety measures

You can optionally set the safety policy for session. This has to be done before importing any of the classes.

lab.set_safety('high')  # Pauses for input before every move action
lab.set_safety('low')   # Waits for countdown before every move action
# Import other classes from control-lab-ly only after setting the safety policy

5. Using plugins

User-defined plugins can be integrated into Control.lab.ly without making additions or modifications to the package itself. All classes and functions can be found in lab.modules.

print(lab.modules)  
# view the entire package (only those that have been imported during the session)
lab.modules.Make.Something.Good.myClass
# this expression returns the registered class

5.1 Directly registering a Class or Function

You can import the class and register the object using the Factory.register() function.

from my_module import myClass
lab.Factory.register(myClass, "Make.Something.Good")

5.2 Registering a Python module

Alternatively, you can automatically register all Classes and Functions in a Python module just by importing it.
Declare a __where__ global variable to indicate where to register the module.

### my_module.py
__where__ = "Make.Something.Good"                 # Where to register this module to
def myClass:                                      # Main body of code goes here
  ...
from controllably import include_this_module
include_this_module()                             # Registers only the Classes and Functions defined above in this .py file

At the end of the .py file, import and call the include_this_module() function.


Dependencies

  • Dash (>=2.7.1)
  • Impedance (>=1.4.1)
  • Imutils (>=0.5.4)
  • Matplotlib (>=3.3.4)
  • Nest-asyncio (>=1.5.1)
  • Numpy (>=1.19.5)
  • Opencv-python (>=4.5.4.58)
  • Pandas (>=1.2.4)
  • Plotly (>=5.3.1)
  • PyModbusTCP (>=0.2.0)
  • Pyserial (>=3.5)
  • PySimpleGUI (>=4.60.4)
  • PyVISA (>=1.12.0)
  • PyYAML (>=6.0)
  • Scipy (>=1.6.2)

Contributors

@kylejeanlewis
@mat-fox
@Quijanove
@AniketChitre

How to Contribute

Issues and feature requests are welcome!

License

This project is distributed under the MIT License.


Change Log

Unreleased

Items under development

1.0.0.x

Major overhaul in package structure. Standardisation of methods and consolidation of common methods. First released 12 Apr 2023.

Added

1.0.0

  • Usage of Abstract Base Classes (ABCs) to define a base class with abstract methods that needs to be implemented through sub-classing
  • Usage of Protocols to provide an interface between different classes of objects
  • Usage of Dataclasses to store complex data
  • Usage of decorators to modify methods
  • Introduced different functions to parse the program docstring and find program parameters

Changed

1.0.0

  • Standardised methods and consolidated common methods
  • Added type hints
  • Moved Dobot attachments from Mover to Transfer.Substrate
  • Split GUI Panels into individual files
  • Split Dobot arms into individual files
  • Split functions/methods in misc.py into individual files.
  • Changed _flags to a public attribute flags
  • Update documentation

Removed

1.0.0

  • Unnecessary commented-out blocks of code

0.0.4.x

Introduced control for Peltier device and TriContinent Series C syringe pumps. First released 10 Mar 2023.

Added

0.0.4

  • Added control for Peltier
    • set and get temperatures
    • hold temperatures for desired duration
    • checks if target temperature has been reached by checking power level lower than a threshold or time passed over a predefined duration, once the temperature is within tolerance
    • ability to record temperatures and timestamps
  • Added control for TriContinent and TriContinentEnsemble
    • single actions such as empty, fill, initialise, move actions, set speeds and valves, and wait
    • compound actions such as aspirate, dispense, and prime

Changed

0.0.4

  • Update documentation

0.0.3.x

Minor changes to movement robot safety and pipette control. Introduced control for LED array. First released 08 Mar 2023.

Added

0.0.3

  • Added safety measures for movement actions
    • In Deck, added exclusion zones when reading the layout.json file and new method is_excluded() to check if target coordinate is within the exclusion zone
    • In Mover, update isFeasible() method to check if target coordinates violates the deck's exclusion zone
    • New function set_safety() defines safety modes when starting a new session to pause for input (in "high" safety setting) and to wait for safety countdown (in "low" safety setting)
  • Make.Light.LEDArray for controlling LEDs in the photo-reactor, as well as timing the LED "on" durations

Changed

0.0.3.1

  • Update documentation

0.0.3

  • Sartorius
    • made the blowout/home optional for the dispense method upon emptying the pipette
  • Update documentation

0.0.2.x

Updates in setting up configuration files. First released 24 Feb 2023.

Added

0.0.2.2

  • Added import of CompoundSetup class

0.0.2

  • Deck.at() method for directly referencing slots using either index numbers or names
  • New CompoundSetup class for common methods of Compound devices
  • New load_deck() function to load Deck after initialisation

Changed

0.0.2.1

  • Changed template files for lab.create_setup()

0.0.2

  • Update documentation

0.0.1.x

First release of Control.lab.ly distributed on 23 Feb 2023.

Added

  • Make
    • Multi-channel spin-coater [Arduino]
  • Measure
    • (Keithley) 2450 Source Measure Unit (SMU) Instrument
    • (PiezoRobotics) Dynamic Mechanical Analyser (DMA)
    • Precision mass balance [Arduino]
  • Move
    • (Creality) Ender-3
    • (Dobot) M1 Pro
    • (Dobot) MG400
    • Primitiv [Arduino]
  • Transfer
    • (Sartorius) rLINE® dispensing modules
    • Peristaltic pump and syringe system [Arduino]
  • View
    • (FLIR) AX8 thermal imaging camera - full functionality in development
    • Web cameras [General]
  • misc
    • Helper class for most common actions
    • create_configs: make new directory for configuration files
    • create_setup: make new directory for specific setup-related files
    • load_setup: initialise setup on import during runtime

0.0.0.x

Pre-release packaging checks

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

control-lab-ly-1.0.0b0.tar.gz (296.6 kB view hashes)

Uploaded Source

Built Distribution

control_lab_ly-1.0.0b0-py3-none-any.whl (339.1 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page