Reprap oriented gcode utilities
Project description
GCodeUtils is a set of utilities to manipulate GCode programs. It is targetting RepRap oriented GCode but isn’t limited to RepRap.
Currently, it is composed of one calibration generation program, a basic gcode modifier (which translates code along X/Y or convert extrusion distance to relative) and a stretcher to increase hole size of printed parts.
Installation
GCodeUtils is installable from PyPI with a single pip command:
pip install gcodeutils
Alternatively, GCodeUtils can be run directly from sources after a git pull:
git clone https://github.com/zeograd/gcodeutils.git cd gcodeutils && python setup.py install
Once GCodeUtils is installed, the .py files located in the cura_plugins subdirectory can be copied into the plugins directory of Cura to be callable from within Cura itself.
Documentation
Latest documentation can be found online at this address: http://gcodeutils.readthedocs.org/en/latest/
Acknowledgement
GCode parsing is borrowed from GCoder as found in Printrun (https://github.com/kliment/Printrun)
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distributions
Built Distribution
Hashes for gcodeutils-1.1-py2.py3-none-any.whl
Algorithm | Hash digest | |
---|---|---|
SHA256 | abe78511a6540071e73739c3a795a46f089e1406173b39d3ab3945353c3833ce |
|
MD5 | 36625b87756002562bb404a1a309ecda |
|
BLAKE2b-256 | 4e77bba3e6b6e8eac7b432ff37033b719ca1ffb91e1404ba9ba095ce5757ffb1 |