gravity 0.13.6

Installation

Python 3.7 or later is required. Gravity can be installed independently of Galaxy, but please read the section on Galaxy Integration below.

To install:

$ pip install gravity

To make your life easier, you are encourged to install into a virtualenv. The easiest way to do this is with Python’s built-in venv module:

$ python3 -m venv ~/gravity
$ . ~/gravity/bin/activate

By default, Gravity will store its state, configuration, and log files in $XDG_CONFIG_HOME/galaxy-gravity, where $XDG_CONFIG_HOME typically defaults to ~/.config. You can change this with the --state-dir option to the Gravity commands, or by setting $GRAVITY_STATE_DIR in your environment.

Galaxy 22.01 Integration

Gravity was originally designed to support managing multiple Galaxy (as well as Galaxy Reports and Tool Shed) servers on a single host, but hides some of this complexity from you if you are working with a single Galaxy server. Additionally, Galaxy 22.01 has added Gravity as a dependency, and changes have been made to Gravity to support this mode of operation.

• Gravity 0.9.0 has dropped support for running Galaxy with uWSGI in favor of gunicorn and FastAPI.

• Gravity 0.9.0 cannot be used with Galaxy versions older than 22.01.

• As of Galaxy 22.01, Gravity is automatically installed into Galaxy’s virtualenv by Galaxy’s setup scripts (as called by run.sh)

• Galaxy’s setup scripts as of 22.01 also set $GRAVITY_STATE_DIR to <galaxy_root>/database/gravity when running Galaxy from the source directory. This keeps each Galaxy instance’s Gravity configuration separate.

Usage

If running from the root of a Galaxy source tree, you can start and run Galaxy in the foreground with:

$ galaxy
Registered galaxy config: /home/nate/work/galaxy/config/galaxy.yml
Creating or updating service gunicorn
Creating or updating service celery
Creating or updating service celery-beat
celery: added process group
2022-01-20 14:44:24,619 INFO spawned: 'celery' with pid 291651
celery-beat: added process group
2022-01-20 14:44:24,620 INFO spawned: 'celery-beat' with pid 291652
gunicorn: added process group
2022-01-20 14:44:24,622 INFO spawned: 'gunicorn' with pid 291653
celery                           STARTING
celery-beat                      STARTING
gunicorn                         STARTING
==> /home/nate/work/galaxy/database/gravity/log/gunicorn.log <==
...log output follows...

Galaxy will continue to run and output logs to stdout until terminated with CTRL+C.

The galaxy command is actually a shortcut for three separate steps: 1. register your Galaxy configuration file (galaxy.yml) with Gravity, 2. write out the process manager configurations, and 3. start and run Galaxy in the foreground using the process manager (supervisor). You can perform these steps separately (and in this example, start Galaxy as a backgrounded daemon instead of in the foreground):

$ galaxyctl register config/galaxy.yml
Registered galaxy config: /home/nate/work/galaxy/config/galaxy.yml
$ galaxyctl update
Creating or updating service gunicorn
Creating or updating service celery
Creating or updating service celery-beat
$ galaxyctl start
celery                           STARTING
celery-beat                      STARTING
gunicorn                         STARTING
Log files are in /home/nate/work/galaxy/database/gravity/log

When running as a daemon, the stop subcommand stops your Galaxy server:

$ galaxyctl stop
celery-beat: stopped
gunicorn: stopped
celery: stopped
All processes stopped, supervisord will exit
Shut down

Once a Galaxy configuration file has been registered with Gravity, it doesn’t matter where you call galaxy or galaxyctl from.

Configuration

The following options in the gravity section of galaxy.yml can be used to control Gravity:: unset are shown):

# Configuration for Gravity process manager.
# ``uwsgi:`` section will be ignored if Galaxy is started via Gravity commands (e.g ``./run.sh``, ``galaxy`` or ``galaxyctl``).
gravity:

  # Specify Galaxy's root directory.
  # Gravity will attempt to find the root directory, but you can set the directory explicitly with this option.
  # galaxy_root:

  # Set to a directory that should contain log files for the processes controlled by Gravity.
  # If not specified defaults to ``<state_dir>/log``.
  # log_dir:

  # Set to Galaxy's virtualenv directory.
  # If not specified, Gravity assumes all processes are on PATH.
  # virtualenv:

  # Select the application server.
  # ``gunicorn`` is the default application server.
  # ``unicornherder`` is a production-oriented manager for (G)unicorn servers that automates zero-downtime Galaxy server restarts,
  # similar to uWSGI Zerg Mode used in the past.
  # Valid options are: gunicorn, unicornherder
  # app_server: gunicorn

  # Override the default instance name.
  # this is hidden from you when running a single instance.
  # instance_name: _default_

  # Configuration for Gunicorn.
  gunicorn:

    # Enable Galaxy gunicorn server.
    # enable: true

    # The socket to bind. A string of the form: ``HOST``, ``HOST:PORT``, ``unix:PATH``, ``fd://FD``. An IP is a valid HOST.
    # bind: localhost:8080

    # Controls the number of Galaxy application processes Gunicorn will spawn.
    # Increased web performance can be attained by increasing this value.
    # If Gunicorn is the only application on the server, a good starting value is the number of CPUs * 2 + 1.
    # 4-12 workers should be able to handle hundreds if not thousands of requests per second.
    # workers: 1

    # Gunicorn workers silent for more than this many seconds are killed and restarted.
    # Value is a positive number or 0. Setting it to 0 has the effect of infinite timeouts by disabling timeouts for all workers entirely.
    # If you disable the ``preload`` option workers need to have finished booting within the timeout.
    # timeout: 300

    # Extra arguments to pass to Gunicorn command line.
    # extra_args:

    # Use Gunicorn's --preload option to fork workers after loading the Galaxy Application.
    # Consumes less memory when multiple processes are configured. Default is ``false`` if using unicornherder, else ``true``.
    # preload:

    # Extra environment variables and their values to set when running the service. A dictionary where keys are the variable
    # names.
    # environment: {}

  # Configuration for Celery Processes.
  celery:

    # Enable Celery distributed task queue.
    # enable: true

    # Enable Celery Beat periodic task runner.
    # enable_beat: true

    # Number of Celery Workers to start.
    # concurrency: 2

    # Log Level to use for Celery Worker.
    # Valid options are: DEBUG, INFO, WARNING, ERROR
    # loglevel: DEBUG

    # Queues to join
    # queues: celery,galaxy.internal,galaxy.external

    # Pool implementation
    # Valid options are: prefork, eventlet, gevent, solo, processes, threads
    # pool: threads

    # Extra arguments to pass to Celery command line.
    # extra_args:

    # Extra environment variables and their values to set when running the service. A dictionary where keys are the variable
    # names.
    # environment: {}

  # Configuration for gx-it-proxy.
  gx_it_proxy:

    # Set to true to start gx-it-proxy
    # enable: false

    # Public-facing IP of the proxy
    # ip: localhost

    # Public-facing port of the proxy
    # port: 4002

    # Routes file to monitor.
    # Should be set to the same path as ``interactivetools_map`` in the ``galaxy:`` section.
    # sessions: database/interactivetools_map.sqlite

    # Include verbose messages in gx-it-proxy
    # verbose: true

    # Forward all requests to IP.
    # This is an advanced option that is only needed when proxying to remote interactive tool container that cannot be reached through the local network.
    # forward_ip:

    # Forward all requests to port.
    # This is an advanced option that is only needed when proxying to remote interactive tool container that cannot be reached through the local network.
    # forward_port:

    # Rewrite location blocks with proxy port.
    # This is an advanced option that is only needed when proxying to remote interactive tool container that cannot be reached through the local network.
    # reverse_proxy: false

    # Extra environment variables and their values to set when running the service. A dictionary where keys are the variable
    # names.
    # environment: {}

  # Configuration for tusd server (https://github.com/tus/tusd).
  # The ``tusd`` binary must be installed manually and made available on PATH (e.g in galaxy's .venv/bin directory).
  tusd:

    # Enable tusd server.
    # If enabled, you also need to set up your proxy as outlined in https://docs.galaxyproject.org/en/latest/admin/nginx.html#receiving-files-via-the-tus-protocol.
    # enable: false

    # Path to tusd binary
    # tusd_path: tusd

    # Host to bind the tusd server to
    # host: localhost

    # Port to bind the tusd server to
    # port: 1080

    # Directory to store uploads in.
    # Must match ``tus_upload_store`` setting in ``galaxy:`` section.
    # upload_dir:

    # Comma-separated string of enabled tusd hooks.
    #
    # Leave at the default value to require authorization at upload creation time.
    # This means Galaxy's web process does not need to be running after creating the initial
    # upload request.
    #
    # Set to empty string to disable all authorization. This means data can be uploaded (but not processed)
    # without the Galaxy web process being available.
    #
    # You can find a list of available hooks at https://github.com/tus/tusd/blob/master/docs/hooks.md#list-of-available-hooks.
    # hooks_enabled_events: pre-create

    # Extra arguments to pass to tusd command line.
    # extra_args:

    # Extra environment variables and their values to set when running the service. A dictionary where keys are the variable
    # names.
    # environment: {}

  # Configure dynamic handlers in this section.
  # See https://docs.galaxyproject.org/en/latest/admin/scaling.html#dynamically-defined-handlers for details.
  # handlers: {}

As a convenience for cases where you may want to have different Gravity configurations but a single Galaxy configuration (e.g. your Galaxy server is split across multiple hosts), the Gravity configuration can be stored in a separate file and included into the Galaxy configuration. For example, on a deployment where the web (gunicorn) and job handler processes run on different hosts, one might have:

In galaxy.yml:

gravity: !include gravity.yml
galaxy:
  database_connection: postgresql://...
  ...

In gravity.yml on the web host:

log_dir: /var/log/galaxy
gunicorn:
  bind: localhost:8888
celery:
  enable: false
  enable_beat: false

In gravity.yml on the job handler host:

log_dir: /var/log/galaxy
gunicorn:
  enable: false
celery:
  enable: true
  enable_beat: true
handlers:
  handler:
    processes: 2

Subcommands

Use galaxyctl --help for help. Subcommands also support --help, e.g. galaxy register --help

$ galaxyctl register config/galaxy.yml  # or galaxy.yml.sample if galaxy.yml does not exist
$ galaxyctl update
$ galaxyctl start

configstate.yaml

As discussed in the Configuration section, Gravity maintains a state file that also acts as a configuration of sorts. Administrators deploying Galaxy with a deployment tool (e.g. Ansible) can take advantage of this to deploy a Gravity state file as part of their Galaxy deployment. See the $GRAVITY_STATE_DIR/configstate.yaml file after performing a register and update command to see what this file looks like, or below for an example. Keep in mind that running galaxyctl commands after changing the Galaxy configuration can cause changes to the state file because it was not originally intended to be user-maintainable. See Issue #6 for discussion and development related to this, as we seek to provide a more consistent experience in working with Gravity’s configuration.

config_files:
  /home/nate/work/galaxy/config/galaxy.yml:
    config_type: galaxy
    instance_name: _default_
    attribs:
      app_server: gunicorn
      log_dir: /home/nate/work/galaxy/database/gravity/log
      bind: 'localhost:8080'
      galaxy_root: /home/nate/work/galaxy
    services:
    - config_type: galaxy
      service_type: gunicorn
      service_name: gunicorn
    - config_type: galaxy
      service_type: celery
      service_name: celery
    - config_type: galaxy
      service_type: celery-beat
      service_name: celery-beat

0.13.6

• Fix graceful method for gunicorn --preload by @Slugger70 in https://github.com/galaxyproject/gravity/pull/76

• Add --version option to get Gravity version by @natefoo in https://github.com/galaxyproject/gravity/pull/79

• Fix stopping of gx-it-proxy by @abretaud in https://github.com/galaxyproject/gravity/pull/91

0.13.5

• If virtualenv is set in the Gravity config, automatically add its bin dir to $PATH if the gx-it-proxy is enabled by @natefoo in https://github.com/galaxyproject/gravity/pull/71

• Support converting settings to command line arguments in a generalized way by @natefoo in https://github.com/galaxyproject/gravity/pull/73

0.13.4

• Fixes for startup test by @natefoo in https://github.com/galaxyproject/gravity/pull/68

• Fix setting environment vars on handlers by @natefoo in https://github.com/galaxyproject/gravity/pull/70

0.13.3

• Don’t use gunicorn logging options with unicornherder by @natefoo in https://github.com/galaxyproject/gravity/pull/65

0.13.2

• Don’t override PATH in subprocess call by @jdavcs in https://github.com/galaxyproject/gravity/pull/62

• Only send pre create hook by @mvdbeek in https://github.com/galaxyproject/gravity/pull/64

0.13.1

• Set correct default for environment settings by @natefoo in https://github.com/galaxyproject/gravity/pull/58

• Don’t catch exceptions in the deregister, register, and rename subcommands by @natefoo in https://github.com/galaxyproject/gravity/pull/59

• processes in the handling dict in the job conf dict is a dict, not a list by @natefoo in https://github.com/galaxyproject/gravity/pull/60

0.13.0

• Add options to enable/disable gunicorn, celery, and celery-beat services by @natefoo in https://github.com/galaxyproject/gravity/pull/47

• Add ability to include gravity config from a separate file and document by @natefoo in https://github.com/galaxyproject/gravity/pull/48

• Only default to preload = true for gunicorn if not using unicornherder by @natefoo in https://github.com/galaxyproject/gravity/pull/49

• Add option to specify tusd path by @natefoo in https://github.com/galaxyproject/gravity/pull/50

• Support setting per-service environment variables by @natefoo in https://github.com/galaxyproject/gravity/pull/56

0.12.0

• Fix typo in log_dir description by @nsoranzo in https://github.com/galaxyproject/gravity/pull/44

• Shortcut individual services fix by @natefoo in https://github.com/galaxyproject/gravity/pull/45

• Add additional options to celery beat / celery workers by @mvdbeek in https://github.com/galaxyproject/gravity/pull/46

0.11.0

• Allow setting supervisor socket path via environment variable by @mvdbeek in https://github.com/galaxyproject/gravity/pull/36

• Automatically switch to non-sample galaxy.yml if it exists by @mvdbeek in https://github.com/galaxyproject/gravity/pull/39

• Add pydantic config schema by @mvdbeek in https://github.com/galaxyproject/gravity/pull/42

• Add –quiet option to galaxy and galaxyctl start by @mvdbeek in https://github.com/galaxyproject/gravity/pull/40

• Add support for yaml job config by @mvdbeek in https://github.com/galaxyproject/gravity/pull/37

• Add –preload support for gunicorn by @mvdbeek in https://github.com/galaxyproject/gravity/pull/41

• Support running tusd by @natefoo in https://github.com/galaxyproject/gravity/pull/23

0.10.0

• Fix for the case where a job_conf.xml exists but no handlers are defined by @natefoo in https://github.com/galaxyproject/gravity/pull/24

• Do not raise error if config file section is empty by @nsoranzo in https://github.com/galaxyproject/gravity/pull/25

• Add tests for static handlers and a defined job_conf.xml with no handlers by @natefoo in https://github.com/galaxyproject/gravity/pull/26

• Fix minor typos in readme by @ic4f in https://github.com/galaxyproject/gravity/pull/27

• Move configuration to gravity key of galaxy.yml file by @mvdbeek in https://github.com/galaxyproject/gravity/pull/28

• Fix for resolved galaxy.yml.sample symlink by @mvdbeek in https://github.com/galaxyproject/gravity/pull/31

• Support managing gx-it-proxy via gravity by @mvdbeek in https://github.com/galaxyproject/gravity/pull/32

0.9

• Gunicorn/fastAPI support, click support, tests by @mvdbeek in https://github.com/galaxyproject/gravity/pull/14

• Don’t test on Python 3.6, which is unsupported by @natefoo in https://github.com/galaxyproject/gravity/pull/17

• Update README. Also some various small bugfixes and fixes for other stuff mentioned in the README by @natefoo in https://github.com/galaxyproject/gravity/pull/18

• Add unicornherder support by @natefoo in https://github.com/galaxyproject/gravity/pull/15

• Expose the log following used by start -f as its own subcommand. by @natefoo in https://github.com/galaxyproject/gravity/pull/16

• Better integration with Galaxy’s run.sh by @natefoo in https://github.com/galaxyproject/gravity/pull/19

• Use relative paths in supervisord by @natefoo in https://github.com/galaxyproject/gravity/pull/21

• Converted CLI from argparse to click.

• Stole ideas and code from planemo in general.

• Improve the AttributeDict so that it can have “hidden” items (anything that starts with a _) that won’t be serialized. Also, it serializes itself and can be created via deserialization from a classmethod. This simplifies using it to persist state data in the new GravityState subclass.

0.8.3

• Merge galaxycfg and galaxyadm commands to galaxy.

0.8.2

• Allow for passing names of individual services directly to supervisorctl via the start, stop, and restart methods.

• Fix a bug where uWSGI would not start when using the automatic virtualenv install method.

0.8.1

• Version bump because I deleted the 0.8 files from PyPI, and despite the fact that it lets you delete them, it doesn’t let you upload once they have been uploaded once…

0.8

• Add auto-register to galaxy start if it’s called from the root (or subdirectory) of a Galaxy root directory.

• Make galaxycfg remove accept instance names as params in addition to config file paths.

• Use the same hash generated for an instance name as the hash for a generated virtualenv name, so virtualenvs are more easily identified as belonging to a config.

• Renamed from galaxyadmin to gravity (thanks John Chilton).

0.7

• Added the galaxyadm subcommand graceful on a suggestion from Nicola Soranzo.

• Install uWSGI into the config’s virtualenv if requested.

• Removed any dependence on Galaxy and eggs.

• Moved project to its own repository from the Galaxy clone I’d been working from.

Older

• Works in progress as part of the Galaxy code.