Skip to main content

JWT Access Auth Identity Policy for Morepath

Project description

more.jwtauth: JWT Authentication integration for Morepath

Overview

This is a Morepath authentication extension for the JSON Web Token (JWT) Authentication.

For more information about JWT, see:

To access resources using JWT Access Authentication, the client must have obtained a JWT to make signed requests to the server. The Token can be opaque to client, although, unless it is encrypted, the client can read the claims made in the token.

JWT validates the authenticity of the claimset using the signature.

This plugin uses the PyJWT library from José Padilla for verifying JWTs.

Introduction

The general workflow of JWT Access Authentication:
  • After the client has sent the login form we check if the user exists and if the password is valid.

  • In this case more.jwtauth generates a JWT token including all information in a claim set and send it back to the client inside the HTTP authentication header.

  • The client stores it in some local storage and send it back in the authentication header on every request.

  • more.jwtauth validates the authenticity of the claim set using the signature included in the token.

  • The logout should be handled by the client by removing the token and making some cleanup depending on the implementation.

You can include all necessary information about the identity in the token so JWT Access Authentication can be used by a stateless service e.g. with external password validation.

Requirements

  • Python (2.7, 3.3, 3.4, 3.5)

  • morepath (>= 0.14)

  • PyJWT (1.4.0)

  • optional: cryptography (1.3.1)

Installation

You can use pip for installing more.jwtauth:

  • pip install -U more.jwtauth[crypto] - for installing with cryptography

  • pip install -U more.jwtauth - installing without cryptography

Alternatively you can use buildout to install more.jwtauth. Remember to install cryptography explicitly if you need it.

Usage

For a basic setup just set the necessary settings including a key or key file and pass them to JWTIdentityPolicy:

import morepath
from more.jwtauth import JWTIdentityPolicy


class App(morepath.App):
    pass


@App.setting_section(section="jwtauth")
def get_jwtauth_settings():
    return {
        # Set a key or key file.
        'master_secret': 'secret',

        # Adjust the settings which you need.
        'leeway': 10
    }


@App.identity_policy()
def get_identity_policy(settings):
    # Get the jwtauth settings as a dictionary.
    jwtauth_settings = settings.jwtauth.__dict__.copy()

    # Pass the settings dictionary to the identity policy.
    return JWTIdentityPolicy(**jwtauth_settings)


@App.verify_identity()
def verify_identity(identity):
    # As we use a token based authentication we can trust the claimed identity.
    return True

The login can be done in the standard Morepath way. You can add extra information about the identity, which will be stored in the JWT token and can be accessed through the morepath.Identity object:

class Login(object):
    pass


@App.path(model=Login, path='login')
def get_login():
    return Login()


@App.view(model=Login, request_method='POST')
def login(self, request):
    username = request.POST['username']
    password = request.POST['password']

    # Here you get some extra user information.
    fullname = request.POST['fullname']
    email = request.POST['email']
    role = request.POST['role']

    # Do the password validation.
    if not user_has_password(username, password):
        raise HTTPProxyAuthenticationRequired('Invalid username/password')

    @request.after
    def remember(response):
        # We pass the extra info to the identity object.
        identity = morepath.Identity(username, fullname=fullname, email=email, role=role)
        morepath.remember_identity(response, request, identity)

    return "You're logged in."  # or something more fancy

Don’t use reserved claim names as “iss”, “aud”, “exp”, “nbf”, “iat”, “jti” and the user_id_claim (default: “sub”, see settings). They will be silently ignored.

Advanced:

For testing or if we want to use some methods of the JWTIdentityPolicy class directly we can pass the settings as arguments to the class:

identity_policy = JWTIdentityPolicy(
    master_secret='secret',
    leeway=10
)

Algorithms

The JWT spec supports several algorithms for cryptographic signing. This library currently supports:

HS256

HMAC using SHA-256 hash algorithm (default)

HS384

HMAC using SHA-384 hash algorithm

HS512

HMAC using SHA-512 hash algorithm

ES256 [1]

ECDSA signature algorithm using SHA-256 hash algorithm

ES384 [1]

ECDSA signature algorithm using SHA-384 hash algorithm

ES512 [1]

ECDSA signature algorithm using SHA-512 hash algorithm

PS256 [1]

RSASSA-PSS signature using SHA-256 and MGF1 padding with SHA-256

PS384 [1]

RSASSA-PSS signature using SHA-384 and MGF1 padding with SHA-384

PS512 [1]

RSASSA-PSS signature using SHA-512 and MGF1 padding with SHA-512

RS256 [1]

RSASSA-PKCS1-v1_5 signature algorithm using SHA-256 hash algorithm

RS384 [1]

RSASSA-PKCS1-v1_5 signature algorithm using SHA-384 hash algorithm

RS512 [1]

RSASSA-PKCS1-v1_5 signature algorithm using SHA-512 hash algorithm

Settings

There are some settings that you can override. Here are all the defaults:

@App.setting_section(section="jwtauth")
def get_jwtauth_settings():
    return {
        'master_secret': None,
        'private_key': None,
        'private_key_file': None,
        'public_key': None,
        'public_key_file': None,
        'algorithm': "HS256",
        'expiration_delta': datetime.timedelta(hours=6),
        'leeway': 0,
        'verify_expiration': True,
        'issuer': None,
        'auth_header_prefix': "JWT",
        'userid_claim': "sub"
    }

The following settings are available:

master_secret

A secret known only by the server, used for the default HMAC (HS*) algorithm. Default is None.

private_key

An Elliptic Curve or an RSA private_key used for the EC (EC*) or RSA (PS*/RS*) algorithms. Default is None.

private_key_file

A file holding an Elliptic Curve or an RSA encoded (PEM/DER) private_key. Default is None.

public_key

An Elliptic Curve or an RSA public_key used for the EC (EC*) or RSA (PS*/RS*) algorithms. Default is None.

public_key_file

A file holding an Elliptic Curve or an RSA encoded (PEM/DER) public_key. Default is None.

algorithm

The algorithm used to sign the key. Defaults is HS256.

expiration_delta

Time delta from now until the token will expire. Set to None to disable. Default is 6 hours.

leeway

The leeway, which allows you to validate an expiration time which is in the past, but not very far. To use as a datetime.timedelta. Defaults is 0.

verify_expiration

If you set it to False and expiration_delta is not None, you should verify the “exp” claim by yourself and if it is expired you can either refresh the token or you must reject it. Default is True.

issuer

This is a string that will be checked against the iss claim of the token. You can use this e.g. if you have several related apps with exclusive user audience. Default is None (do not check iss on JWT).

auth_header_prefix

You can modify the Authorization header value prefix that is required to be sent together with the token. The default value is JWT. Another common value used for tokens is Bearer.

userid_claim

The claim, which contains the user id. The default claim is ‘sub’.

The library takes either a master_secret or private_key/public_key pair. In the later case the algorithm must be an EC*, PS* or RS* version.

Inspiration

This module is inspired by:

CHANGES

0.6 (2016-05-19)

  • Make Cryptography optional.

    Breaking Change: For using other algorithms than HMAC you now need to install the crypto dependencies explicitly. Read the note in the Requirements section and the new Installation section of README.rst.

  • Add an Installation section to the README.

  • Refactor the cryptography test suite.

0.5 (2016-04-25)

  • Adding some tests.

  • Increase coverage to 100%.

  • Add travis-ci and tox integration.

  • Some clean-up.

  • Upgrade to Morepath 0.14.

  • Some improvements to the setup and release workflow.

0.4 (2016-04-13)

  • Upgrade to morepath 0.13.2 and update the tests.

  • Upgrade PyJWT to 1.3.0 and cryptography to 1.3.1.

  • Make it a PyPI package and release it. Fixes Issue #1.

0.3 (2016-04-13)

  • Upgrade PyJWT to 1.4.0 and cryptography to 0.9.1.

  • Python 3.2 is no longer a supported platform. This version of Python is rarely used. PyUsers affected by this should upgrade to 3.3+.

  • Some cleanup.

0.2 (2015-06-29)

  • Integrate the set_jwt_auth_header function into the identity policy as remember method.

  • Add support for PS256, PS384, and PS512 algorithms.

  • Pass settings directly as arguments to the JWTIdentityPolicy class with the possibility to override them with Morepath settings using the method introduced in Morepath 0.11.

  • Remove JwtApp as now we use JWTIdentityPolicy directly without inherit from JwtApp.

  • Add a Introduction and Usage section to README.

  • Integrate all functions as methods in the JWTIdentityPolicy Class.

  • Refactor the test suite.

0.1 (2015-04-15)

  • Initial public release.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

more.jwtauth-0.6.tar.gz (19.8 kB view hashes)

Uploaded Source

Built Distribution

more.jwtauth-0.6-py2.py3-none-any.whl (20.7 kB view hashes)

Uploaded Python 2 Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page