network-changer 0.1.0

Installation

Something like:

> python3 -m venv network_changer
> ./network_changer/bin/python -m pip install network_changer
> ./network_changer/network_changer info

On Linux systems with nmcli it’ll install sdbus related dbus libraries. You can modify that behaviour with these environment variables at pip install:

NETWORK_CHANGER_NO_SDBUS

Don’t automatically install sdbus. If you want sdbus anyway then use:

> python -m pip instal network_changer[sdbus]

On linux systems without nmcli, you’ll need libiw-dev to be installed for network switching to work. You will also need sudo for all actions with iw and for wpasupplicant to be uninstalled.

If you are using nmcli on a raspberry Pi, you’ll need to do the following:

> sudo apt-get install network-manager
# Make /etc/NetworkManager/NetworkManager.conf look like this
|   [main]
|   plugins=ifupdown,keyfile
|   dhcp=internal
|
|   [ifupdown]
|   managed=true
# Make sure /etc/dhcpcd.conf has "denyinterfaces wlan0" in it somewhere
> sudo reboot

On a Mac, it’ll shell out to the airport CLI command. Note that the only thing that requires sudo is disconnection.

There is no Windows support.

Usage

Once you’ve installed network_manager you have three commands available to you:

network_manager info

Display the bssid and ssid of the interface

--interface <iface>

Specify which interface to use. By default it’ll find the one most appropriate for your system. So en0 on Mac and wlan0 on a linux

network_manager scan

Display the bssid and ssid of the access points the interface can see

--interface <iface>

Specify which interface to use. By default it’ll find the one most appropriate for your system. So en0 on Mac and wlan0 on a linux

--filter-bssid <some string>

Only show networks whose bssid contains the specified string in it

--filter-ssid <some string>

Only show networks whose ssid contains the specified string in it

network_manager connect

Connect to the network with the specified ssid. Note that this library does not support networks that have any type of security.

--interface <iface>

Specify which interface to use. By default it’ll find the one most appropriate for your system. So en0 on Mac and wlan0 on a linux

--ssid <ssid>

The ssid to connect to

Changelog

0.1.0 - TBD

• Initial release

• Note that there are no unit tests and this code isn’t actively used by me