premise_gwp

Import the official IPCC's GWP20a/GWP100a characterization factors into Brightway2, with the addition of hydrogen and biogenic CO₂ uptake and release flows. This is needed when using premise -generated LCI databases for two reasons:

• in some scenarios, hydrogen-based supply chains (and associated losses) are significant
• some scenarios rely on Bioenergy with carbon capture and storage (BECCS), Direct Air capture (DAC), and any other forms of storage using biomass or atmospheric resources. Without it, negative emission technologies (NET) do not yield a net negative carbon footprint.

Impact category

This adds:

• IPCC 2013 and 2021, climate change, GWP 100a, with hydrogen

  • "Hydrogen", with a CF of 33 and 11 for GWP20 and GWP100 respectively.

• IPCC 2013 and 2021, climate change, GWP 100a, with hydrogen and bio CO2

  • "Hydrogen", with a CF of 33 and 11 for GWP20 and GWP100 respectively.
  • "Carbon dioxide, in air", with a CF of -1
  • "Carbon dioxide, non-fossil, resource correction", with a CF of -1
  • "Carbon dioxide, non-fossil", with a CF of +1

The biogenic carbon balance in the rest of the ecoinvent database should be correct. Hence, using this method, instead of the regular IPCC GWP method, should not yield any difference, as long as BECCS are not present and solicited in the database.

The characterization factors for the global warming impact GWP100a of for hydrogen is taken from Warwick et al, 2022.

Limitation

Now works with bw2io 0.8.7 and bw2io 0.8.8. If bw2io 0.8.8 is present, IPCC 2021 methods will be installed, otherwise IPCC 2013 methods will be installed.

Usage

In an open Brightway2 project:

from premise_gwp import add_premise_gwp
add_premise_gwp()

Installation

pip install premise_gwp

or

conda install -c romainsacchi premise_gwp