Skip to main content

A collectd output plugin to send Carbon 2.0-formatted metrics to Sumo Logic.

Project description

A collectd <https://collectd.org/> output plugin to send Carbon 2.0-formatted metrics to Sumo Logic.

Get Started

1. Python version

Sumo Logic collectd plugin is built on top of collectd-python plugin. The minimum required version for running the plugin is Python version 2.6. You can download and install the desired Python version from Python download page.

2. Install collectd on your machine

If collectd is already installed, you can skip this step. Otherwise, follow the instructions in the collectd download site for download and installation. For additional details, see first_steps section in the collectd Wiki.

Mac OSX

brew install collectd

Debian / Ubuntu

sudo apt-get install collectd

3. Download and install Sumo Logic collectd plugin

Option 1: Install as a library

sudo pip install sumologic_collectd_metrics

All required dependencies will be automatically installed with library installation.

Option2: Install with source code

The Sumo Logic collectd plugin source code can be saved in a directory anywhere on your system. Dowload it from PythonIdex > Package Index > sumologic_collectd_metrics, or:

git clone https://github.com/SumoLogic/sumologic-collectd-plugin.git

Sumo Logic collectd plugin uses requests and retry libraries for sumbitting https requests. If they are not installed. Install them using pip:

sudo pip install requests
sudo pip install retry

4. Create an HTTP Metrics Source in Sumo Logic

Create a Sumo Logic account if you don’t currently have one.

Follow these instructions for setting up an HTTP Source in Sumo Logic. Be sure to obtain the URL endpoint after creating an HTTP Source.

5. Configure Sumo Logic collectd plugin

Sumo Logic collectd plugin supports the following parameters. To configure the plugin, modify collectd’s configuration file named collectd.conf (e.g. /etc/collectd/collectd.conf).

Required parameters

The parameters below are required and must be specified in the module config.

Name

Description

Type

Required

URL

The URL to send metrics to. This should be given when creating the HTTP Source on Sumo Logic web app.

String

True

Basic parameters

The parameters below are not strictly required. It is recommended to set these parameters as they prove to be extremely useful to categorize your metrics and search by them.

Name

Description

Type

Required

SourceName

Name of the metrics source. _sourceName can be used to search metrics from this source. It will override the default configured in the the Sumo Logic Source configuration.

String

False

SourceHost

Name of metrics host. _sourceHost can be used to search metrics from this host. It will override the default configured in the the Sumo Logic Source configuration.

String

False

SourceCategory

Category of the collected metrics. _sourceCategory can be used to search metrics from this category. It will override the default configured in the the Sumo Logic Source configuration.

String

False

Dimensions

Key value pairs that contribute to identifying a metric. Collectd data have intrinsic dimensions with keys as host, plugin, plugin_instance, type, type_instance, ds_name, ds_type. The Additional dimensions specified here can help separating metrics collected from this collectd instance with metircs collected from other collectd instances. Dimensions cannot contain Reserved symbols and Reserved keywords

Srings in the format of "key1"="val1", "key2"="val2"

False

Metadata

Key value pairs that do not contribute to identifying a metric. Metadata are primarily used to assist in searching metrics. Collectd data may have internal metadata. The additional metadata specified here can be used to enrich the existing metadata set. Metadata cannot contain Reserved symbols and Reserved keywords

Srings in the format of "key1"="val1", "key2"="val2"

False

AddMetricDimension

If set to true adds new dimension named metric to every data point which consists of type and type_instance concatenated using MetricDimensionSeparator. By default it is set to True.

Boolean

False

MetricDimensionSeparator

String used to concatenate type and type_instance while creating metric dimension. See AddMetricDimension option. By default it is ..

String

False

Additional parameters

For additional configuration parameters, see Advanced parameters below.

Example configuration

An example configuration for the plugin is shown below (code to be added to collectd.conf under collectd_root/etc):

LoadPlugin python
<Plugin python>
    # Uncomment and update the following line if sumologic collectd plugin installed with source code
    # ModulePath "/path/to/sumologic-collectd-plugin"
    LogTraces true
    Interactive false
    Import "sumologic_collectd_metrics"

    <Module "sumologic_collectd_metrics">
        URL "https://<deployment>.sumologic.com/receiver/v1/http/<source_token>"  # URL must be specified
        # Uncomment and update the following lines to override the default metadata configured in the the Sumo Logic Source configuration
        # SourceName "my_source"
        # SourceHost "my_host"
        # SourceCategory "my_category"
        # Uncomment and update the following lines to add additional key=value pairs
        # Dimensions "my_dim_key1"="my_dim_val1", "my_dim_key2"="my_dim_val2"
        # Metadata "my_meta_key1"="my_meta_val1", "my_meta_key2"="my_meta_val2"
    </Module>
</Plugin>

Reserved symbols

Equal sign and space are reserved symbols:

"=", " "

Reserved keywords

Following terms are reserved for Sumo Logic internal use only:

"_sourcehost", "_sourcename", "_sourcecategory", "_collectorid", "_collector", "_source", "_sourceid", "_contenttype", "_rawname"

6. Start sending metrics

Start sending metrics by running collectd, e.g. (command will differ depending on collectd installation):

sudo service collectd start

View logs

If logfile is installed, then you can view logs by tailling collectd.log file, e.g. (command can be differnt depends on collectd installation):

tail -f /var/log/collectd.log

Data model

The Sumo Logic collectd plugin will send metrics using the Carbon 2.0 format, defined as:

dimensions  metadata value timestamp

dimensions and metadata are key/value pairs of strings separated by two spaces. dimensions uniquely identifying a metric, while metadata do not contribute to identifying a metric. Instead, they are used to categorize metrics for searching. value is a double number. timestamp is a 10-digit UNIX epoch timestamp

Example data before compression:

host=my_mac plugin=cpu plugin_instance=1 type=cpu type_instance=user ds_name=value ds_type=DERIVE  meta_key1=meta_val1 5991.000000 1502148249
host=my_mac plugin=cpu plugin_instance=0 type=cpu type_instance=user ds_name=value ds_type=DERIVE  meta_key1=meta_val1 98722.000000 1502148249

Naming Schema

collectd uses are very powerful naming schema to identify each statistics value. It has been proven very generic and flexible, but may be confusing at first, especially to new users. You can read more about it by following this wiki collectd naming schema.

Compression

Metrics are batched and compressed before they are sent. The compression algorithm is "deflate". The algorithm is explained in more detail in An Explanation of the Deflate Algorithm. Alternately, you can specify "gzip" for gzip compression and "none" for no compression.

Error handling

Sumo Logic collectd plugin retries on exceptions by default. When all retries fail, the request is either scheduled for a future attempt or dropped based on the buffer status. By default, 1000 requests are buffered. If the buffer becomes full, then requests failed after all retries will be dropped. Otherwise, it is put back to the processing queue for the next run.

7. View metrics

To view the metrics sent by the collectd plugin, log into Sumo Logic and open a Metrics tab. Query for metrics using either dimensions or metadata, e.g.:

_sourceName=my_source _sourceHost=my_host _sourceCategory=my_category plugin=cpu

You should be able to see metrics displayed in the main graph.

Advanced Topics

Advanced parameters

You can configure the Sumo Logic collectd plugin by overriding default values for plugin parameters.

Name

Description

Type

Default

Unit

MaxBatchSize

Sumo Logic collectd plugin batches metrics before sending them over https. MaxBatchSize defines the upper limit of metrics per batch.

Positive Integer

5000

NA

MaxBatchInterval

Sumo Logic collectd plugin batches metrics before sending them through https. MaxBatchInterval defines the upper limit of duration to construct a batch.

Positive Integer

1

Second

HttpPostInterval

Sumo Logic collectd plugin schedules https post requests at fixed intervals. HttpPostInterval defines the frequency for the scheduler to run. If no metrics batch is available at the time, the sceduler immediately returns. If multiple metrics batches are available, then the oldest batch is picked to be sent.

Positive Float

0.1

MaxRequestsToBuffer

Sumo Logic collectd plugin buffers failed and delayed metrics batch requests. MaxRequestsToBuffer specifies the maximum number of these requests to buffer. After the buffer becomes full, the request with oldest metrics batch will be dropped to make space for new metrics batch.|Positive Integer

Positive Integer

1000

NA

RetryInitialDelay

Sumo Logic collectd plugin retries on recoverable exceptions. RetryInitialDelay specifies the initial delay before a retry is scheduled. More information can be found in the retry library

Non-negative Integer

0

Second

RetryMaxAttempts

Sumo Logic collectd plugin retries on recoverable exceptions. RetryMaxAttempts specifies the upper limit of retries before the current retry logic fails. The metric batch is then either put back for the next run (when metrics buffer specified by MaxRequestsToBuffer is not full), or dropped (when metrics buffer is full). More information can be found in the retry library

Positive Integer

10

NA

RetryMaxDelay

Sumo Logic collectd plugin retries on recoverable exceptions. RetryMaxDelay specifies the upper limit of delay before the current retry logic fails. Then the metric batch either is put back for the next run (when metrics buffer specified by MaxRequestsToBuffer is not full), or dropped (when metrics buffer is full). More information can be found in the retry library

Positive Integer

100

Second

RetryJitterMin

Sumo Logic collectd plugin retries on recoverable exceptions. RetryJitterMin specifies the minimum extra seconds added to delay between attempts. More information can be found in the retry library

Non-negative Integer

0

Second

RetryJitterMax

Sumo Logic collectd plugin retries on recoverable exceptions. RetryJitterMax specifies the maximum extra seconds added to delay between attempts. More information can be found in the retry library

Non-negative Integer

10

Second

EnableInternalMetrics

Enable the plugin’s internal metrics. See Plugin Internal Metrics

Boolean

false

NA

SignalFxStatsDTags

Enable extracting metadata from metrics using SignalFx’ extension to the StatsD protocol. See: https://docs.signalfx.com/en/latest/integrations/agent/monitors/collectd-statsd.html#adding-dimensions-to-statsd-metrics

Boolean

false

NA

Plugin Architecture

Collectd            MetricsConverter                  MetricsBatcher                MetricsBuffer                             MetricsSender
--------        --------------------------            --------------           ------------------------                     -----------------
                                                                                                            batch to send
Raw Data   ->   Metric in Carbon 2.0 format    ->     Metrics Batch     ->     Buffered metrics batches         ->          Request scheduler
                                                                                                                <-
                                                                                                            failed batch

Plugin Internal Metrics

If the EnableInternalMetrics configuration option is set to true, the plugin emits metrics describing its own internal state.

The following metrics are available:

Name

Type

Description

received_metrics

Gauge

The number of metrics values received from collectd.

sent_metrics

Gauge

The number of metrics values successfully sent to Sumo.

sent_batches

Gauge

The number of metrics batches successfully sent to Sumo.

dropped_metrics

Gauge

The number of metrics values dropped during processing due to various faults, typically buffers being full.

dropped_batches

Gauge

The number of metrics batches dropped during processing due to various faults, typically buffers being full.

batch_queue_size

Gauge

The number of batches in the sending queue.

TLS 1.2 Requirement

Sumo Logic only accepts connections from clients using TLS version 1.2 or greater. To utilize the content of this repo, ensure that it’s running in an execution environment that is configured to use TLS 1.2 or greater.

License

The Sumo Logic collectd output plugin is published under the Apache Software License, Version 2.0. Please visit http://www.apache.org/licenses/LICENSE-2.0.txt for details.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

sumologic_collectd_metrics-4.1.0.tar.gz (32.6 kB view hashes)

Uploaded Source

Built Distribution

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page