zstandard 0.3.0

Expected Changes

The author is reasonably confident in the current state of what’s implemented on the ZstdCompressor and ZstdDecompressor types. Those APIs likely won’t change significantly. Some low-level behavior (such as naming and types expected by arguments) may change.

There will likely be arguments added to control the input and output buffer sizes (currently, certain operations read and write in chunk sizes using zstd’s preferred defaults).

The author is on the fence as to whether to support the extremely low level compression and decompression APIs. It could be useful to support compression without the framing headers. But the author doesn’t believe it a high priority at this time.

The CFFI bindings are half-baked and need to be finished.

ZstdCompressor

The ZstdCompressor class provides an interface for performing compression operations.

Each instance is associated with parameters that control compression behavior. These come from the following named arguments (all optional):

level

Integer compression level. Valid values are between 1 and 22.

dict_data

Compression dictionary to use.

Note: When using dictionary data and compress() is called multiple times, the CompressionParameters derived from an integer compression level and the first compressed data’s size will be reused for all subsequent operations. This may not be desirable if source data size varies significantly.

compression_params

A CompressionParameters instance (overrides the level value).

write_checksum

Whether a 4 byte checksum should be written with the compressed data. Defaults to False. If True, the decompressor can verify that decompressed data matches the original input data.

write_content_size

Whether the size of the uncompressed data will be written into the header of compressed data. Defaults to False. The data will only be written if the compressor knows the size of the input data. This is likely not true for streaming compression.

write_dict_id

Whether to write the dictionary ID into the compressed data. Defaults to True. The dictionary ID is only written if a dictionary is being used.

Instances expose a simple compress(data) method that will return compressed data. e.g.:

cctx = zstd.ZsdCompressor()
compressed = cctx.compress(b'data to compress')

There is also a context manager that allows you to stream data into the compressor as well as to an output object:

cctx = zstd.ZstdCompressor(level=10)
with cctx.write_to(fh) as compressor:
    compressor.write(b'chunk 0')
        compressor.write(b'chunk 1')
        ...

write_to(fh) accepts an object with a write(data) method. When write(data) method is called on the object returned by the write_to call, compressed data is sent to the passed argument by calling its write() method. Many common Python types implement write(), including open file handles and BytesIO. So this makes it simple to stream compressed data without having to write extra code to marshall data around.

If the size of the data being fed to this streaming compressor is known, you can declare it before compression begins:

cctx = zstd.ZstdCompressor()
with cctx.write_to(fh, size=len(data)) as compressor:
    compressor.write(data)

Declaring the size of the source data allows compression parameters to be tuned. And if write_content_size is used, it also results in the content size being written.

To see how much memory is being used by the streaming compressor:

cctx = zstd.ZstdCompressor()
    with cctx.write_to(fh) as compressor:
        ...
            byte_size = compressor.memory_size()

If you prefer to stream data out of a compressor as an iterator, read_from(reader) can be used:

cctx = zstd.ZstdCompressor()
for chunk in cctx.read_from(fh):
     # Do something with emitted data.

read_from() will call .read(size) on the passed object to obtain uncompressed data to feed into the compressor. The returned iterator consists of chunks of compressed data.

One of the advantages of read_from() is the caller is in control of when data is compressed: data won’t be read from the reader and fed into the compressor until the returned iterator is advanced. This means CPU cycles won’t be spent compressing data until the consumer has asked for them.

Like write_to(), read_from() also accepts a size argument declaring the size of the input stream:

cctx = zstd.ZstdCompressor()
    for chunk in cctx.read_from(fh, size=some_int):
        pass

It is common to want to perform compression across 2 streams, reading raw data from 1 and writing compressed data to another. There is a simple API that performs this operation:

cctx = zstd.ZstdCompressor()
cctx.copy_stream(ifh, ofh)

For example, say you wish to compress a file:

cctx = zstd.ZstdCompressor()
with open(input_path, 'rb') as ifh, open(output_path, 'wb') as ofh:
        cctx.copy_stream(ifh, ofh)

It is also possible to declare the size of the source stream:

cctx = zstd.ZstdCompressor()
cctx.copy_stream(ifh, ofh, size=len_of_input)

The stream copier returns a 2-tuple of bytes read and written:

cctx = zstd.ZstdCompressor()
read_count, write_count = cctx.copy_stream(ifh, ofh)

ZstdDecompressor

The ZstdDecompressor class provides an interface for performing decompression.

Each instance is associated with parameters that control decompression. These come from the following named arguments (all optional):

dict_data

Compression dictionary to use.

The interface of this class is very similar to ZstdCompressor (by design).

To decompress an entire compressed zstd frame:

dctx = zstd.ZstdDecompressor()
    uncompressed = dctx.decompress(data)

Please note that by default decompress(data) will only work on data written with the content size encoded in its header. This can be achieved by creating a ZstdCompressor with write_content_size=True. If compressed data without an embedded content size is seen, zstd.ZstdError will be raised.

To attempt decompression without the content size in the input data, pass max_output_size to the method to specify the maximum byte size of decompressed output:

dctx = zstd.ZstdDecompressor()
    uncompressed = dctx.decompress(data, max_output_size=1048576)

Ideally, max_output_size will be identical to the uncompressed output size. If max_output_size is too small to hold the decompressed data, zstd.ZstdError will be raised.

Please note that an allocation of the requested max_output_size will be performed. Setting to a very large value could result in a lot of work for the memory allocator and may result in MemoryError being raised if the allocation fails.

If max_output_size is larger than the decompressed data, the allocated output buffer will be resized to only use the space required.

It is strongly recommended to use a streaming decompression API instead of guessing the output size.

To incrementally send uncompressed output to another object via its write() method, use write_to():

dctx = zstd.ZstdDecompressor()
with dctx.write_to(fh) as decompressor:
    decompressor.write(compressed_data)

You can see how much memory is being used by the decompressor:

dctx = zstd.ZstdDecompressor()
    with dctx.write_to(fh) as decompressor:
        byte_size = decompressor.memory_size()

It is also possible to stream data out of a decompressor via read_from(fh):

dctx = zstd.ZstdDecompressor()
    for chunk in dctx.read_from(fh):
        # Do something with original data.

read_from() accepts an object with a read(size) method that will return compressed bytes. It returns an iterator whose elements are chunks of the uncompressed data.

Similarly to ZstdCompressor.read_from(), the consumer of the iterator controls when data is decompressed. If the iterator isn’t consumed, decompression is put on hold.

You can also copy data between 2 streams:

dctx = zstd.ZstdDecompressor()
dctx.copy_stream(ifh, ofh)

e.g. to decompress a file to another file:

dctx = zstd.ZstdDecompressor()
with open(input_path, 'rb') as ifh, open(output_path, 'wb') as ofh:
    dctx.copy_stream(ifh, ofh)

Dictionary Creation and Management

Zstandard allows dictionaries to be used when compressing and decompressing data. The idea is that if you are compressing a lot of similar data, you can precompute common properties of that data (such as recurring byte sequences) to achieve better compression ratios.

In Python, compression dictionaries are represented as the ZstdCompressionDict type.

Instances can be constructed from bytes:

dict_data = zstd.ZstdCompressionDict(data)

More interestingly, instances can be created by training on sample data:

dict_data = zstd.train_dictionary(size, samples)

This takes a list of bytes instances and creates and returns a ZstdCompressionDict.

You can see how many bytes are in the dictionary by calling len():

dict_data = zstd.train_dictionary(size, samples)
dict_size = len(dict_data)  # will not be larger than ``size``

Once you have a dictionary, you can pass it to the objects performing compression and decompression:

dict_data = zstd.train_dictionary(16384, samples)

cctx = zstd.ZstdCompressor(dict_data=data)
for source_data in input_data:
    compressed = cctx.compress(source_data)
        # Do something with compressed data.

dctx = zstd.ZstdDecompressor(dict_data=dict_data)
for compressed_data in input_data:
    buffer = io.BytesIO()
    with dctx.write_to(buffer) as decompressor:
            decompressor.write(compressed_data)
        # Do something with raw data in ``buffer``.

Dictionaries have unique integer IDs. You can retrieve this ID via:

dict_id = zstd.dictionary_id(dict_data)

Explicit Compression Parameters

Zstandard’s integer compression levels along with the input size and dictionary size are converted into a data structure defining multiple parameters to tune behavior of the compression algorithm. It is possible to use define this data structure explicitly to have lower-level control over compression behavior.

The zstd.CompressionParameters type represents this data structure. You can see how Zstandard converts compression levels to this data structure by calling zstd.get_compression_parameters(). e.g.:

params = zstd.get_compression_parameters(5)

This function also accepts the uncompressed data size and dictionary size to adjust parameters:

params = zstd.get_compression_parameters(3, source_size=len(data), dict_size=len(dict_data))

You can also construct compression parameters from their low-level components:

params = zstd.CompressionParameters(20, 6, 12, 5, 4, 10, zstd.STRATEGY_FAST)

You can then configure a compressor to use the custom parameters:

cctx = zstd.ZstdCompressor(compression_params=params)

The members of the CompressionParameters tuple are as follows:

* 0 - Window log
* 1 - Chain log
* 2 - Hash log
* 3 - Search log
* 4 - Search length
* 5 - Target length
* 6 - Strategy (one of the ``zstd.STRATEGY_`` constants)

You’ll need to read the Zstandard documentation for what these parameters do.

Misc Functionality

Constants

The following module constants/attributes are exposed:

ZSTD_VERSION

This module attribute exposes a 3-tuple of the Zstandard version. e.g. (1, 0, 0)

MAX_COMPRESSION_LEVEL

Integer max compression level accepted by compression functions

COMPRESSION_RECOMMENDED_INPUT_SIZE

Recommended chunk size to feed to compressor functions

COMPRESSION_RECOMMENDED_OUTPUT_SIZE

Recommended chunk size for compression output

DECOMPRESSION_RECOMMENDED_INPUT_SIZE

Recommended chunk size to feed into decompresor functions

DECOMPRESSION_RECOMMENDED_OUTPUT_SIZE

Recommended chunk size for decompression output

FRAME_HEADER

bytes containing header of the Zstandard frame

MAGIC_NUMBER

Frame header as an integer

WINDOWLOG_MIN

Minimum value for compression parameter

WINDOWLOG_MAX

Maximum value for compression parameter

CHAINLOG_MIN

Minimum value for compression parameter

CHAINLOG_MAX

Maximum value for compression parameter

HASHLOG_MIN

Minimum value for compression parameter

HASHLOG_MAX

Maximum value for compression parameter

SEARCHLOG_MIN

Minimum value for compression parameter

SEARCHLOG_MAX

Maximum value for compression parameter

SEARCHLENGTH_MIN

Minimum value for compression parameter

SEARCHLENGTH_MAX

Maximum value for compression parameter

TARGETLENGTH_MIN

Minimum value for compression parameter

TARGETLENGTH_MAX

Maximum value for compression parameter

STRATEGY_FAST

Compression strategory

STRATEGY_DFAST

Compression strategory

STRATEGY_GREEDY

Compression strategory

STRATEGY_LAZY

Compression strategory

STRATEGY_LAZY2

Compression strategory

STRATEGY_BTLAZY2

Compression strategory

STRATEGY_BTOPT

Compression strategory