skip to navigation
skip to content

XBee 2.2.5

Python tools for working with XBee radios

XBee

XBee provides an implementation of the XBee serial communication API. It allows one to easily access advanced features of one or more XBee devices from an application written in Python. An example use case might look like this:

#! /usr/bin/python

# Import and init an XBee device
from xbee import XBee, ZigBee
import serial

ser = serial.Serial('/dev/ttyUSB0', 9600)

# Use an XBee 802.15.4 device
xbee = XBee(ser)
# To use with an XBee ZigBee device, replace with:
# xbee = ZigBee(ser)

# Set remote DIO pin 2 to low (mode 4)
xbee.remote_at(
    dest_addr=b'\x56\x78',
    command='D2',
    parameter=b'\x04')

xbee.remote_at(
    dest_addr=b'\x56\x78',
    command='WR')

Installation

pip install xbee

Install from Source

Extract the source code to your computer, then run the following command in the root of the source tree:

python setup.py install

This will automatically install the package for you.

Documentation

See the python-xbee project on Read the Docs.

To build the documentation yourself, ensure that Sphinx is installed. Then cd into the docs folder, and run ‘make html’. The documentation can then be opened in any modern web browser at docs/build/html/index.html.

For more information about building or modifying this project’s documentation, see the documentation for the Sphinx project.

Dependencies

PySerial

Additional Dependencies

To run automated tests: Nose

To build the documentation: Sphinx

XBee Firmware

Please ensure that your XBee device is programmed with the latest firmware provided by Digi. Using an old firmware revision is not supported and may result in unspecified behavior.

Contributors

 
File Type Py Version Uploaded on Size
XBee-2.2.5-py3-none-any.whl (md5) Python Wheel py3 2017-04-26 18KB
XBee-2.2.5.tar.gz (md5) Source 2017-04-26 24KB