Python cross-version byte-code interpeter
Project description
x-python
This is a CPython bytecode interpreter written Python.
You can use this to:
Learn about how the internals of CPython works since this models that
Use as a sandboxed environment for trying pieces of execution
Have one Python program that runs multiple versions of Python bytecode. For a number of things you can Python 2.5 or 2.6 bytecode from inside Python 3.7; No need to install Python 2.5 or 2.6!
Use in a dynamic fuzzer or in coholic execution for analysis
The sandboxed environment in a debugger I find interesting. Since there is a separate execution, and traceback stack, inside a debugger you can try things out in the middle of a debug session without effecting the real execution. On the other hand if a sequence of executions works out, it is possible to copy this (under certain circumstances) back into CPython’s execution stack.
Going the other way, I may at some point hook in my debugger into this interpreter and then you’ll have a conventional pdb/gdb like debugger also with the ability to step bytecode instructions.
Another unexplored avenue implied above is mixing interpretation and direct CPython execution. In fact, there are bugs so this happens right now, but it will be turned into a feature. Some functions or classes you may want to not run under a slow interpreter while others you do want to run under the interpreter.
Examples:
What to know instructions get run when you write some simple code? Try this:
$ xpython -vc "x, y = 2, 3; x **= y" INFO:xpython.pyvm2:Line 1, 0: LOAD_CONST (2, 3) INFO:xpython.pyvm2: 2: UNPACK_SEQUENCE 2 INFO:xpython.pyvm2: 4: STORE_NAME 'x' INFO:xpython.pyvm2: 6: STORE_NAME 'y' INFO:xpython.pyvm2: 8: LOAD_NAME 'x' INFO:xpython.pyvm2: 10: LOAD_NAME 'y' INFO:xpython.pyvm2: 12: INPLACE_POWER INFO:xpython.pyvm2: 14: STORE_NAME 'x' INFO:xpython.pyvm2: 16: LOAD_CONST None INFO:xpython.pyvm2: 18: RETURN_VALUE
Option -c is the same as Python’s flag (program passed in as string) and -v is also analogus Python’s flag. Here, it shows the bytecode instructions run.
Want the execution stack stack and block stack in addition? Add another v:
$ xpython -vvc "x, y = 2, 3; x **= y"
DEBUG:xpython.pyvm2:make_frame: code=<code object <module> at 0x7f33d1cf01e0, file "<string x, y = 2, 3; x **= y>", line 1>, callargs={}, f_globals=(<class 'dict'>, 139860540041568), f_locals=(<class 'NoneType'>, 94796399066560)
DEBUG:xpython.pyvm2:<Frame at 0x7f33d135ef50: '<string x, y = 2, 3; x **= y>' @ 1>
DEBUG:xpython.pyvm2: frame.stack: []
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2:Line 1, 0: LOAD_CONST (2, 3)
DEBUG:xpython.pyvm2: frame.stack: [(2, 3)]
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 2: UNPACK_SEQUENCE 2
DEBUG:xpython.pyvm2: frame.stack: [3, 2]
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 4: STORE_NAME 'x'
DEBUG:xpython.pyvm2: frame.stack: [3]
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 6: STORE_NAME 'y'
DEBUG:xpython.pyvm2: frame.stack: []
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 8: LOAD_NAME 'x'
DEBUG:xpython.pyvm2: frame.stack: [2]
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 10: LOAD_NAME 'y'
DEBUG:xpython.pyvm2: frame.stack: [2, 3]
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 12: INPLACE_POWER
DEBUG:xpython.pyvm2: frame.stack: [8]
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 14: STORE_NAME 'x'
DEBUG:xpython.pyvm2: frame.stack: []
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 16: LOAD_CONST None
DEBUG:xpython.pyvm2: frame.stack: [None]
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 18: RETURN_VALUE
The above showed straight-line code, so you see all of the instructions. But don’t confuse this with a disassembler like pydisasm from xdis. The below example, with conditional branching example makes this more clear:
$ xpython -vvc "x = 6 if __name__ != '__main__' else 10"
DEBUG:xpython.pyvm2:make_frame: code=<code object <module> at 0x7f2dd0d2f150, file "<string x = 6 if __name__ !=>", line 1>, callargs={}, f_globals=(<class 'dict'>, 139834753714688), f_locals=(<class 'NoneType'>, 94349724270016)
DEBUG:xpython.pyvm2:<Frame at 0x7f2dd039ded0: '<string x = 6 if __name__ !=>' @ 1>
DEBUG:xpython.pyvm2: frame.stack: []
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2:Line 1, 0: LOAD_NAME '__name__'
DEBUG:xpython.pyvm2: frame.stack: ['__main__']
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 2: LOAD_CONST '__main__'
DEBUG:xpython.pyvm2: frame.stack: ['__main__', '__main__']
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 4: COMPARE_OP 3
DEBUG:xpython.pyvm2: frame.stack: [False]
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 6: POP_JUMP_IF_FALSE 12
DEBUG:xpython.pyvm2: frame.stack: []
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 12: LOAD_CONST 10
DEBUG:xpython.pyvm2: frame.stack: [10]
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 14: STORE_NAME 'x'
DEBUG:xpython.pyvm2: frame.stack: []
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 16: LOAD_CONST None
DEBUG:xpython.pyvm2: frame.stack: [None]
DEBUG:xpython.pyvm2: blocks : []
INFO:xpython.pyvm2: 18: RETURN_VALUE
Status:
Currently only Python 2.5 - 2.7, and 3.2 - 3.7 bytecode is supported. Until there is more interest or I get support or funding, I am not contemplating expanding to 3.8 and beyond for a while.
A shout out to xdis which has made cross version interpretation and expanding to other versions easier.
Whereas Byterun was a bit loose in accepting bytecode opcodes that is invalid for particular Python but may be valid for another; x-python is more stringent. This has pros and cons. On the plus side Byterun might run certain Python 3.4 bytecode because the opcode sets are similar. However starting with Python 3.5 and beyond the likelihood gets much less because, while the underlying opcode names may be the same, the semantics of the operation may change subtely. See for example https://github.com/nedbat/byterun/issues/34.
Internally Byterun needs the kind of overhaul we have here to be able to scale to support bytecode for more Pythons, and to be able to run bytecode across different versions of Python. Specifically, you can’t rely on Python’s dis module if you expect to expect to run a bytecode other than the bytecode that the interpreter is running.
In x-python there is a clear distinction between the version being interpreted and the version of Python that is running. There is tighter control of opcodes and an opcode’s implementation is kept for each Python version. So we’ll warn early when something is invalid. You can run 3.3 bytecode using Python 3.7 (largely).
The “largely” part is because the interpreter has always made use of Python builtins. When a Python version running the interperter matches a supported bytecode close enough, the interpreter can (and does) make use interpreter internals. For example, built-in functions like range() are supported this way.
Currently running 2.7 bytecode on 3.x is often not feasible since the runtime and internal libraries used like inspect are too different.
Over time more of Python’s internals may get added so we have better cross-version compatability, so that is a possibility. Harder is to run later byecode from earlier Python versions. The callenge here is that many new features like asynchronous I/O and concurrency primatives are not in the older versions and may not easily be simulated. However that too is a possibility if there is interest.
You can run many of the tests that Python uses to test itself, and those work. Right now this program works best on Python up to 3.4 when life in Python was much simpler. It runs over 300 in Python’s test suite for itself without problems.
Moving back and forward from 3.4 things worse. Python 3.5 is pretty good. Python 3.6 and 3.7 is okay but needs work.
History
This is a fork of Byterun. which is a pure-Python implementation of a Python bytecode execution virtual machine. Net Batchelder started it (based on work from Paul Swartz) to get a better understanding of bytecodes so he could fix branch coverage bugs in coverage.py.
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
