x-python 1.2.1

Examples:

What to know instructions get run when you write some simple code? Try this:

$ xpython -vc "x, y = 2, 3; x **= y"
INFO:xpython.vm:L. 1   @  0: LOAD_CONST (2, 3)
INFO:xpython.vm:       @  2: UNPACK_SEQUENCE 2
INFO:xpython.vm:       @  4: STORE_NAME x
INFO:xpython.vm:       @  6: STORE_NAME y
INFO:xpython.vm:L. 1   @  8: LOAD_NAME x
INFO:xpython.vm:       @ 10: LOAD_NAME y
INFO:xpython.vm:       @ 12: INPLACE_POWER
INFO:xpython.vm:       @ 14: STORE_NAME x
INFO:xpython.vm:       @ 16: LOAD_CONST None
INFO:xpython.vm:       @ 18: RETURN_VALUE

Option -c is the same as Python’s flag (program passed in as string) and -v is also analogus Python’s flag. Here, it shows the bytecode instructions run.

Want the execution stack stack and block stack in addition? Add another v:

$ xpython -vvc "x, y = 2, 3; x **= y"

DEBUG:xpython.vm:make_frame: code=<code object <module> at 0x7f7acd353420, file "<string x, y = 2, 3; x **= y>", line 1>, callargs={}, f_globals=(<class 'dict'>, 140165406216272), f_locals=(<class 'NoneType'>, 94599533407680)
DEBUG:xpython.vm:<Frame at 0x7f7acd322650: '<string x, y = 2, 3; x **= y>':1 @-1>
DEBUG:xpython.vm:  frame.stack: []
DEBUG:xpython.vm:  blocks     : []
INFO:xpython.vm:L. 1   @  0: LOAD_CONST (2, 3) <module> in <string x, y = 2, 3; x **= y>:1
DEBUG:xpython.vm:  frame.stack: [(2, 3)]
DEBUG:xpython.vm:  blocks     : []
INFO:xpython.vm:       @  2: UNPACK_SEQUENCE 2 <module> in <string x, y = 2, 3; x **= y>:1
DEBUG:xpython.vm:  frame.stack: [3, 2]
DEBUG:xpython.vm:  blocks     : []
INFO:xpython.vm:       @  4: STORE_NAME x <module> in <string x, y = 2, 3; x **= y>:1
DEBUG:xpython.vm:  frame.stack: [3]
DEBUG:xpython.vm:  blocks     : []
INFO:xpython.vm:       @  6: STORE_NAME y <module> in <string x, y = 2, 3; x **= y>:1
DEBUG:xpython.vm:  frame.stack: []
DEBUG:xpython.vm:  blocks     : []
INFO:xpython.vm:L. 1   @  8: LOAD_NAME x <module> in <string x, y = 2, 3; x **= y>:1
DEBUG:xpython.vm:  frame.stack: [2]
DEBUG:xpython.vm:  blocks     : []
INFO:xpython.vm:       @ 10: LOAD_NAME y <module> in <string x, y = 2, 3; x **= y>:1
DEBUG:xpython.vm:  frame.stack: [2, 3]
DEBUG:xpython.vm:  blocks     : []
INFO:xpython.vm:       @ 12: INPLACE_POWER  <module> in <string x, y = 2, 3; x **= y>:1
DEBUG:xpython.vm:  frame.stack: [8]
DEBUG:xpython.vm:  blocks     : []
INFO:xpython.vm:       @ 14: STORE_NAME x <module> in <string x, y = 2, 3; x **= y>:1
DEBUG:xpython.vm:  frame.stack: []
DEBUG:xpython.vm:  blocks     : []
INFO:xpython.vm:       @ 16: LOAD_CONST None <module> in <string x, y = 2, 3; x **= y>:1
DEBUG:xpython.vm:  frame.stack: [None]
DEBUG:xpython.vm:  blocks     : []
INFO:xpython.vm:       @ 18: RETURN_VALUE  <module> in <string x, y = 2, 3; x **= y>:1

Want to see this colorized in a terminal? Use this via trepan-xpy:

Suppose you have Python 2.5 bytecode (or some other bytecode) for this, but you are running Python 3.7?

$ xpython -vc "x = 6 if __name__ != '__main__' else 10"
INFO:xpython.vm:L. 1   @  0: LOAD_CONST (2, 3)
INFO:xpython.vm:       @  3: UNPACK_SEQUENCE 2
INFO:xpython.vm:       @  6: STORE_NAME x
INFO:xpython.vm:       @  9: STORE_NAME y
INFO:xpython.vm:L. 2   @ 12: LOAD_NAME x
INFO:xpython.vm:       @ 15: LOAD_NAME y
INFO:xpython.vm:       @ 18: INPLACE_POWER
INFO:xpython.vm:       @ 19: STORE_NAME x
INFO:xpython.vm:       @ 22: LOAD_CONST None
INFO:xpython.vm:       @ 25: RETURN_VALUE

Not much has changed here, other then the fact that that in after 3.6 instructions are two bytes instead of 1-3 bytes.

The above examples show straight-line code, so you see all of the instructions. But don’t confuse this with a disassembler like pydisasm from xdis. The below example, with conditional branching example makes this more clear:

$ xpython -vc "x = 6 if __name__ != '__main__' else 10"
INFO:xpython.vm:L. 1   @  0: LOAD_NAME __name__
INFO:xpython.vm:       @  2: LOAD_CONST __main__
INFO:xpython.vm:       @  4: COMPARE_OP !=
INFO:xpython.vm:       @  6: POP_JUMP_IF_FALSE 12
INFO:xpython.vm:       @ 12: LOAD_CONST 10
INFO:xpython.vm:       @ 14: STORE_NAME x
INFO:xpython.vm:       @ 16: LOAD_CONST None
INFO:xpython.vm:       @ 18: RETURN_VALUE

Want even more status and control? See trepan-xpy.

Status:

Currently bytecode from Python versions 3.7 - 3.2, and 2.7 - 2.5 are supported. Extending to 3.8 and beyond is on hold until there is more interest, I get help, I need or there is or funding,

Whereas Byterun was a bit loose in accepting bytecode opcodes that is invalid for particular Python but may be valid for another; x-python is more stringent. This has pros and cons. On the plus side Byterun might run certain Python 3.4 bytecode because the opcode sets are similar. However starting with Python 3.5 and beyond the likelihood happening becomes vanishingly small. And while the underlying opcode names may be the same, the semantics of the operation may change subtely. See for example https://github.com/nedbat/byterun/issues/34.

Internally Byterun needs the kind of overhaul we have here to be able to scale to support bytecode for more Pythons, and to be able to run bytecode across different versions of Python. Specifically, you can’t rely on Python’s dis module if you expect to expect to run a bytecode other than the bytecode that the interpreter is running.

In x-python there is a clear distinction between the version being interpreted and the version of Python that is running. There is tighter control of opcodes and an opcode’s implementation is kept for each Python version. So we’ll warn early when something is invalid. You can run 3.3 bytecode using Python 3.7 (largely).

The “largely” part is because the interpreter has always made use of Python builtins. When a Python version running the interperter matches a supported bytecode close enough, the interpreter can (and does) make use interpreter internals. For example, built-in functions like range() are supported this way.

Running 2.7 bytecode on 3.x is sometimes not possible when the portions of the runtime and internal libraries are too different.

Over time more of Python’s internals need to be get added so we have better cross-version compatability. More difficult is running later byecode from earlier Python versions. The challenge here is that many new features like asynchronous I/O and concurrency primatives are not in the older versions and may not easily be simulated. However that too is a possibility if there is interest.

You can run many of the tests that Python uses to test itself, (and I do!) and those work. Right now this program works best on Python up to 3.4 when life in Python was much simpler. It runs over 300 in Python’s test suite for itself without problems.

Moving back and forward from 3.4 things worse. Python 3.5 is pretty good. Python 3.6 and 3.7 is okay but need work.

History

This is a fork of Byterun. which is a pure-Python implementation of a Python bytecode execution virtual machine. Net Batchelder started it (based on work from Paul Swartz) to get a better understanding of bytecodes so he could fix branch coverage bugs in coverage.py.